Professional qualities of the controller otk. QCD controller: functions and duties of an employee. Where to get training

V.V. Umnikov

senior control foreman of the department technical control

1. General Provisions

1.1 The senior control foreman of the technical control department of JSC "Company" reports directly to the head of the technical control department of JSC "Company" or the head of the technical control bureau, if this position is provided.

1.2 The senior control master is appointed and dismissed by order CEO JSC "Company" on the proposal of the Deputy General Director for Quality and Metrology or the Head of Quality Control Department.

1.3 A person with a higher professional (technical) education and work experience in production for at least 1 year or a secondary technical education and work experience in a specialty in the industry corresponding to the profile of an enterprise for at least 3 years is appointed as a senior control master of the QCD.

1.4 The following are subordinate to the senior control master:

- testers of subordinate units:

1.5 The senior control foreman in his activities is guided by:

— resolutions government agencies RF;

— Law of the Russian Federation “On technical regulation”;

- Law of the Russian Federation "On Standardization" No. 5154-1 dated 10.06.93;

- Law of the Russian Federation "On certification of products and services" No. 5151-1 dated 10.06.93;

- Law of the Russian Federation "On ensuring the uniformity of measurements" No. 4871-1 dated April 27, 1993;

— The policy of the enterprise in the field of quality;

— documentation of the quality management system of the enterprise;

— methodological, normative and technical documents and international standards;

— Regulations on QCD;

- real job description.

1.6 In the event of a temporary absence, the duties of a senior control foreman are performed by a specialist appointed by order of the general director on the proposal of the head of the Quality Control Department.

2 Job responsibilities

The senior control master is obliged to:

2.1 Organize work at the assigned site to control and improve the quality of products, the completeness of manufactured products and the accounting of non-conforming products.

2.2 Control the correctness of establishing the type and type of products, their compliance with approved samples (standards), standards, specifications and other regulatory technical documentation.

2.3 Monitor compliance with technological processes at all stages of production, instructions and methods for technical control at the workplace, the quality of containers and packaging, the technical condition of equipment, storage of raw materials, materials and semi-finished products, components, finished products.

2.4 Manage the work on the execution of technical documentation certifying the quality and completeness of manufactured or supplied products (passports, certificates), product certification.

2.5 Monitor adherence to accuracy testing schedules production equipment and equipment, the state of control and measuring equipment, their availability at the workplace, timely submission for state verification.

2.6 Take measures to prevent the production of products that do not meet the established requirements, identify the causes and perpetrators of non-conformities, as well as develop and implement measures aimed at improving the quality and competitiveness of products.

2.7 Participate in the development and implementation of the most advanced product quality management systems, control methods, new and revised existing standards, specifications and other regulations and guidelines.

2.8 Monitor compliance by subordinates with the rules of labor protection, safety, production and labor discipline, internal rules work schedule. Conduct periodic briefings on the rules of labor protection and safety.

2.9 Monitor the delivery of finished products to the warehouse.

2.10 Make proposals to the head of the QCD on encouraging employees, as well as bringing to disciplinary responsibility violators of production and labor discipline.

2.11 Promote skills development and professional excellence workers, their training and assignment of categories, to carry out educational work in a team.

2.12 Participate in production meetings held by the heads of the production departments of the enterprise.

2.13 Participate in the preparation and holding of the "Quality Day" in the shop.

2.14 Timely and accurately execute the production orders of the General Director of the enterprise, production assignments, instructions and instructions of the Deputy General Director for Quality and Metrology, the Head of Quality Control Department.

2.15 To perform the labor duties provided for in this job description and employment contract.

2.16 Comply with the internal labor regulations established at the enterprise.

2.17 Do not engage in activities that directly or indirectly damage the interests of the enterprise.

2.18 Know the relevant QMS documentation required for work and comply with its requirements.

2.19 Continuously improve the results of its activities.

3 Professional requirements

The senior control master must know:

— legislative and regulatory legal acts, teaching materials on product quality management;

— technological processes and modes of production;

— basic technological and design data of manufactured products;

- technical and economic requirements for raw materials, materials, semi-finished products, components and finished products;

— current standards in the industry and at the enterprise, technical conditions, standards for quality indicators, technological instructions;

— systems, means and methods of technical control of production;

- rules for the acceptance and storage of finished products, raw materials, materials, semi-finished products, components;

- methods of sampling, the procedure for labeling and packaging products;

— the procedure for certification of the quality of industrial products;

- types of production non-conformities, methods for their prevention and elimination;

— rules for testing and acceptance of products;

– the procedure for issuing technical documentation certifying the quality of products;

— fundamentals of economics, organization of production, labor and management;

— basics of labor legislation;

— rules and norms of labor protection;

— relevant QMS documentation.

The senior control master has the right:

4.1 Request and receive information necessary for him to perform his duties from employees of any departments.

4.2 Make a decision on disagreements between the QCD employees and employees of the production departments of the enterprise in their assessment of the conformity of products to the requirements established for it.

4.3 Submit proposals to the Deputy General Director for Quality and Metrology - Head of Quality Control Department on bringing to responsibility officials and workers of the enterprise guilty of manufacturing products that do not meet the established requirements.

4.4 To give obligatory for execution by subordinate employees of QCD production instructions and instructions.

4.5 Submit proposals to the Deputy General Director for Quality and Metrology - Head of the QCD on rewarding and punishing employees subordinate to him in the prescribed manner.

4.6 Require the heads of workshops to establish the causes of non-conformity of products, punish those responsible for their occurrence, as well as persons who violated the production technology established by the documentation.

4.7 Use legal benefits Russian Federation and provided for workers in collective agreement enterprises.

4.8 To provide him with the working conditions necessary for the performance of his official duties.

4.9 Represent the enterprise in third-party organizations on issues of product quality.

4.10 Represent the QCD in various commissions of the enterprise on issues within its competence.

5 Service relationships

The senior control master of the technical control department interacts:

5.1 With the central laboratory for measuring technology:

– provides: applications for high-precision and arbitration measurements and tests. Measuring instruments for verification, according to the schedule, out of order before the next verification. Measuring instruments for rechecking or repair;

- receives: graphs for checking measuring instruments. Information about the withdrawal from circulation of faulty measuring devices that did not pass inspection within the established time limits.

5.2 With workshops and sites:

- provides: a conclusion on the conformity of products to the requirements of those. documentation (TU, GOSTs, drawings, standards, manufacturing technology);

- receives: accompanying technical documentation (drawings, diagrams, standards and manufacturing technology for products).

5.3 With the quality engineer of the technical control department:

- provides: with information about the presented products and detected non-conformities. Acts of non-compliance indicating those responsible for the manufacture of non-conforming products. Information about the culture of production;

- Receives: Product return information for each day. Information on the results of accounting for losses from non-conforming products in the shops according to acts of non-compliance and on the allocation of amounts to those responsible.

The senior control master is responsible in the manner prescribed by the laws of the Russian Federation for:

- failure to fulfill the duties assigned to him, provided for by this job description and the employment contract (contract);

Materials: http://oformitely.ru/doljnostnaya_instrukciya_starshego_kontrolynogo_mastera_otk.html

QCD Controller

Inspector QCDThe subject of concern for employees of the technical control service of the enterprise is to improve the quality of all types of manufactured products, ensuring that their indicators comply with the level of world achievements.

Quality indicators are dimensional accuracy, operational reliability, ease of use, compliance with state standards, aesthetic requirements. ControllersOTK(technical control department) - mass working profession. It occupies the 4th place in terms of the number of specialists employed in the industry.
Main operation in progress controller— comparison of product parameters with indicators specified in GOSTs, drawings, technological documentation. At the same time, products are examined “by eye” or checked using control and measuring instruments, devices: micrometers, calipers, gauges, magnifiers, microscopes, electrical measuring instruments, etc. controller there are also lists of "standard images" of the required features of quality products, stored in his memory.
Controller gets the party finished products or semi-finished products, checks each of them, affixes a stamp of control, draws up accompanying documentation, defective statements. But controller not only reveals marriage, but also studies its causes and suggests measures for its prevention. The reasons can be different: non-adjusted equipment, low-quality material, defects in workpieces, lack of qualifications, negligence, inattention of workers. Controller one must be attentive and correct and, at the same time, demanding and principled in dealing with workers.

Job description of the quality controller of products and technological process of the 7th category

Authoritative controller discipline workers. inexperience, carelessness controller can cause conflicts, disorganize the work on the site. Controller- a quality expert, he must be conscientious, understand the consequences of the delivery of low-quality products. Work controller associated with the performance of monotonous actions and may seem monotonous to people who prefer a quick change of impressions and actions, mobile. Work controller requires accuracy, thoroughness, therefore, people who are thorough, unhurried work more successfully here.
Skilled controller knows the production technology, the work process itself, understands the drawings, knows how to use control and measuring tools, has a developed memory, normal vision (not lower than 0.5, without pronounced anomalies), stable visual performance, noise immunity, composure, attentiveness. Exercise stress controller insignificant.
Controllers work in specially equipped workplaces with good lighting. Salary depends on qualifications, hourly bonus.
Speciality controllerOTK has much in common with the work of a tester of finished products or semi-finished products, an expert merchandiser.
profession controllerOTK can be purchased at the enterprise in the order of individual-team training or in vocational schools. A vocational school graduate receives a 2-3 category. In the future, you can continue your education in a technical school or university corresponding to the production profile, become a control foreman, head of a shop control service, head of the enterprise's TC department.

The technical control department (QCD) exists at manufacturing enterprises for the timely detection of violations in production technology. The QCD controller is engaged in identifying defects in the manufacture of products and checking the compliance of products with standards and GOSTs.

Job description of the product processing quality controller

Control is carried out visually or with the help of instrumentation.

Vika works in the quality department of a Russian-Japanese car painting company. The working day in production starts at 7:15, Vika should be at work at 8 in the morning (it's early, but you can go home at 16:15). At about 8:15 there is a daily planning meeting - the entire quality department (20 people) gathers. In 15 minutes, the boss distributes tasks and discusses current problems.

If the beginning of the working day is the same, then the rest of the day goes differently. Time can be spent testing the quality of a paint or primer, checking paint colors and discussing future orders with suppliers (for example, matching colors), compiling reports (sometimes it takes many hours), calibrating fixtures (usually done monthly ) and other tasks.

Places of work

The position of QCD controller is required at all manufacturing enterprises.

Each product must pass quality control before it goes on sale.

History of the profession

The profession of OTK controller can be said to have appeared thanks to Henry Leland, who made the arms production at Samuel Colt's factories a role model. The “master of precision” introduced the concept of “through-caliber” and for the first time in history began to reject outwardly suitable shells due to their inconsistency with the standard. Its motto: "Craftsmanship is the creed, accuracy is the law" is followed by the world's most successful manufacturers.

Responsibilities of the Inspector

The duties of the OTC Controller include:

Output control of finished goods.
Reconciliation of the actual parameters of manufactured products with the benchmarks specified in the technical documentation, drawings, GOSTs.
Registration of accompanying documentation - certificates, defective statements, quality passports.
Checking the quality of raw materials used.
Identification of technological inconsistencies and the causes of marriage.
Proposing ideas for the modernization of production.

Sometimes the functions of the QCD controller may also include handling claims (complaints from customers).

Requirements for the OTC controller

The main requirements for the QCD controller are as follows:

Secondary or higher education.
Experience from 1 year.
Knowledge of production technology, GOSTs.
Ability to read blueprints and design documents.
Control instrumentation skills.
Attention to detail.

Sometimes a specialist may require good vision and excellent coordination of movements, as well as additional education(depending on the specifics of production).

Resume sample

Sample resume for quality control officer.

How to become an OTC controller

To become a QCD controller, it is enough to get a secondary technical or higher specialized education. Knowledge of production processes is also required, as the specialist communicates with technologists, designers, foremen, heads of production departments and the sales department. Knowledge of production often comes with experience as either a technologist or a technical control supervisor.

Quality controller salary

The salary of the OTK controller ranges from 25,000 to 45,000 rubles. When moving along career ladder salary increases significantly. The control master can receive a salary of up to 65,000 rubles, and the head of the shop control service up to 85,000. average salary OTK controller is 30,000 rubles.

Job description of the control foreman of the technical control department [name of organization, enterprise, etc.]

This job description has been developed and approved in accordance with the provisions Labor Code Russian Federation and other regulations governing labor relations In Russian federation.

I. General provisions

1.1. The control foreman of the department (bureau) of technical control in his activities does not depend on the management of the workshop and is directly subordinate to the head (bureau) of technical control (senior control foreman).

1.2. The control master is guided in his work by:

- Regulations on the department of technical control;

- this job description;

- the charter of the enterprise;

- the legislation of the Russian Federation.

1.3. Persons with higher technical education and work experience in production for at least 1 year or secondary specialized education and work experience in production for at least [value] years are appointed to the position of control foreman.

II. Job Responsibilities

2.1. Organize the work of controllers and control the quality of products and services, the completeness of manufactured products at a fixed production site.

2.2. Ensure control over compliance with technological regimes at all stages production process.

2.3. Take measures to prevent production and prevent the release of products that do not meet established requirements, identify the causes and perpetrators of the marriage, organize the registration of marriage.

2.4. Carry out work on the preparation of technical documentation certifying the quality and completeness of the supplied products (passports, certificates, etc.).

2.5. Take part in the delivery of finished products, performed works (services) to customers.

2.6. Check compliance with instructions and procedures for technical control at the workplace.

Profession inspector QCD

To carry out quality control of containers and packaging at workplaces, the technical condition of equipment and means of transport, storage of raw materials, materials, semi-finished products, components, finished products.

2.8. Monitor the implementation of schedules for checking the accuracy of production equipment and tooling, the technical condition of control and measuring equipment, their availability at workplaces and timely submission for state inspection.

2.9. To study and improve the technology of control of products, materials, components.

2.10. Participate in events related to the introduction of new and revision of existing standards, specifications, quality indicators and instructions.

2.11. Perform work related to product certification.

2.12. To control the observance by the workers subordinate to him of the rules of labor protection, safety measures, industrial and labor discipline, internal labor regulations.

III. Rights

The control foreman of the department (bureau) of technical control has the right to:

3.1. Determine the quality of products manufactured at the production site.

3.2. Require production foremen to stop working when a defective or defective product appears, as well as in cases of working on faulty equipment or when using low-quality material, and stop accepting products if these requirements are not met with an immediate report to the senior control foreman or head of the quality control department (BTK).

Identify the perpetrators of the marriage, what to reflect in the primary documents.

3.4. Do not accept the products presented by the workshop (section) in the absence of established documentation for the work performed and in the absence of the stamp of the production master on acceptance of the first part by him.

3.5. Participate in ongoing production foreman quality conferences.

3.6. Prohibit the use of measuring devices that give incorrect readings until the problem is corrected or replaced with suitable ones.

3.7. Represent controllers subordinate to him for rewards or penalties.

IV. A responsibility

The control master is responsible for:

4.1. For non-performance (improper performance) of their official duties provided for by this job description, within the limits determined labor law Russian Federation.

4.2. For offenses committed in the course of carrying out their activities - within the limits determined by the administrative, criminal and civil legislation of the Russian Federation.

4.3. For causing material damage— within the limits determined by the labor, criminal and civil legislation of the Russian Federation.

The job description was developed in accordance with [name, number and date of the document].

Supervisor structural unit

[initials, last name]

[signature]

[day month Year]

Agreed:

Head of the legal department

[initials, last name]

[signature]

[day month Year]

Familiarized with the instructions:

[initials, last name]

[signature]

[day month Year]

The control foreman is guided in his work by: - Regulations on the technical control department; - this job description; - the charter of the enterprise; - the legislation of the Russian Federation. 1.3. Persons with higher technical education and work experience in production for at least 1 year or secondary specialized education and work experience in production for at least [value] years are appointed to the position of control foreman. II. Job responsibilities 2.1. Organize the work of controllers and control the quality of products and services, the completeness of manufactured products at a fixed production site. 2.2. Ensure control over compliance with technological regimes at all stages of the production process. 2.3.

Job description of the controller

Job responsibilities of the product processing quality inspector Job responsibilities of the product processing quality inspector are: a) Special (professional) job responsibilities: - Quality control of product processing at various stages of the technological process. - Return to the collection points of products accepted without indicating defects or due to incomplete orders. - Checking the correctness of species identification technological processing, carrying out preparatory operations and observing the rules for completing production batches. - View products and determine the quality of processing in accordance with applicable technological instructions, standards of enterprises, republican standards and specifications. - Selection of products with processing defects and establishing the reasons for the marriage.

Work instructions for the inspector of materials, metals, semi-finished products and products

Rights of the product processing quality inspector The product processing quality inspector has the right to: 1. Submit proposals for consideration by the management: - to improve the work related to the duties provided for in this instruction, - to bring to material and disciplinary responsibility employees who violated production and labor discipline.
2.

Request from structural divisions and employees of the organization the information necessary for him to perform his duties. 3. Get acquainted with the documents that define his rights and obligations in his position, the criteria for assessing the quality of performance of official duties.

4. Get acquainted with the draft decisions of the organization's management regarding its activities. 5.

What are the duties and responsibilities of a controller?

Attention

Also this employee has the right to report to the management about distinguished employees, to present their candidacies for promotion. In the process of performing his activities, he has the right to give binding instructions to his subordinates, other persons whose activities are under his supervision.

For the optimal implementation of its own functions, the QCD controller has the right to interact with other services and departments of the company, request from other departments Required documents and information, send them the information received.

Job description of the product processing quality controller

Stop acceptance and shipment of finished products that do not meet the requirements of GOST, TU, standards, drawings, set completeness and technical documentation, immediately notifying the quality manager. 3.3. Submit proposals to the quality manager and the head of the quality control department to suspend the manufacturing process of products in individual departments and workshops if it does not meet standards, specifications, drawings, etc. 3.3.

Request and receive the necessary materials and documents related to the activities of the controller QCD.3.4. Enter, on the instructions of the head of the QCD, into relationships with departments of third-party institutions and organizations to resolve operational matters production activities.4.
A RESPONSIBILITY. The QCD controller is responsible for: 4.1.

Job description of the control foreman of the technical control department

Product quality control, separation of the part of the product that has defects. 2.18. Control of the correct sorting of products by batches, assortment.
2.19. Control and acceptance according to the design documentation and specifications of complex configuration products from various plastics and rubber. 2.20. Control and acceptance small items using magnifying glasses and a microscope.

2.21. Checking the geometric shape and relative position of surfaces, participating in various tests. 2.22. Organization of additional control of the technological process in order to eliminate the causes that caused its violation.
2.23. Compilation of a diagnostic file containing possible options impact on technological process in case of deviations of its parameters or indicators of the feedstock from those established by the norm. 2.24.

Job description for the master

The input control inspector reports directly to the head of the QCD input control bureau. 1.4 The QCD input control inspector is appointed and dismissed by the head of the QCD on the proposal of the head of the QCD input control bureau. QMS 7-011 "Incoming control"; - technological sheet BI.70002.00001 "Materials, semi-finished products and components subject to incoming control"; safety; - the company's policy in the field of quality; - QMS documentation necessary for the performance of work. 2.

Info

Requirements for the QCD controller The main requirements for the QCD controller are as follows:

Secondary or higher education.
Experience from 1 year.
Knowledge of production technology, GOSTs.
Ability to read blueprints and design documents.
Control instrumentation skills.
Attention to detail.

Sometimes a specialist may require good vision and excellent coordination of movements, as well as additional education (depending on the specifics of production). Sample CV Sample CV for Inspector. How to become a QCD controller To become a QCD controller, it is enough to get a secondary technical or higher specialized education.

Knowledge of production processes is also required, as the specialist communicates with technologists, designers, foremen, heads of production departments and the sales department.

Profession inspector

Responsibility Quality controller of products and technological process of the 6th category is responsible for: 5.1. For failure to perform, improper performance of the duties provided for by this instruction - within the limits determined by the labor legislation of the Russian Federation.

For offenses committed in the course of carrying out their activities - within the limits determined by the current administrative, criminal, civil legislation of the Russian Federation. 5.3. For causing material damage to the employer - within the limits determined by the current labor and civil legislation of the Russian Federation.

The job description was developed in accordance with [name, number and date of the document].

Rights of the Incoming Control Inspector QCD 4.1 The Incoming Control Inspector has the right: - to enjoy the benefits provided for in the collective agreement of the enterprise; - to require TSU employees to comply with the rules and requirements for the storage and issuance of materials and components to the workshops; - to demand the provision of working conditions for the performance of assigned duties .- Make conclusions about the quality of the received materials, raw materials and components, which are mandatory for TSU. 5. Responsibility of the Incoming Control Inspector of the QCD The Incoming Control Inspector is responsible for: - failure to fulfill the tasks assigned to him and the duties provided for by this job description and the employment contract; - non-compliance with labor protection and safety rules.

Industrial sanitation and fire safety. Head of QCD Agreed: Head of HR Department Head of Maintenance Deputy.

Important

Study and improvement of the technology of control of products, materials, components. Participation in events related to the introduction of new and revision of existing standards, specifications, regulations, quality indicators and instructions.

RIGHTS The Quality Control Department Master has the right to: 3.1. Request and receive the necessary materials and documents related to the activities of the QCD master. 3.2. Enter into relationships with departments of third-party institutions and organizations to resolve operational issues of production activities that fall within the competence of the QCD master.

RESPONSIBILITY The QCD Master is responsible for: 4.1. Failure to fulfill their functional duties.

4.2. Inaccurate information about the status of the work. 4.3. Failure to comply with orders, instructions and instructions of the Head of the Organization. 4.4.

Job description of the QC controller in the production of polyethylene film

During the temporary absence of the QCD master, his duties are assigned to. 2. FUNCTIONAL RESPONSIBILITIES 2.1. The QCD master carries out: Taking measures to prevent production and preventing the release of products that do not meet the established requirements, identifying the causes and perpetrators of the marriage, organizing the registration of marriage.

Work on the preparation of technical documentation certifying the quality and completeness of the supplied products (passports, certificates, etc.). Participation in the delivery of finished products, performed works (services) to customers. Checking compliance with instructions and methods for technical control at the workplace. Quality control of containers and packaging at workplaces, technical condition of equipment and means of transport, storage of raw materials, materials, semi-finished products, components, finished products.

The quality control controller is an employee who ensures product quality control, compliance with the technological process of its production. These employees are involved in various areas of production activity, provide internal supervision over the compliance of products with established norms and standards. That is why their specific rights and obligations are determined depending on the chosen sphere of production, type of products. The general rights and obligations of this category of workers are enshrined in their standard job descriptions, the content of which is often duplicated in the texts of labor agreements.

What rights does the OTK controller have?

The QCD controller has the right to control the timely and complete fulfillment of production tasks by the employees of the enterprise. This right also implies the possibility to report directly to the management about violations identified during the verification of compliance with the technological process of production, product quality control. Also, this employee has the right to report to the management about distinguished employees, to present their candidates for promotion. In the process of performing his activities, he has the right to give binding instructions to his subordinates, other persons whose activities are under his supervision. For the optimal implementation of its own functions, the QCD controller has the right to interact with other services and departments of the company, request the necessary documents and information from other departments, and send them the information received.

What are the duties of a QCD Controller?

Basic official duty The controller of the QCD is to oversee the implementation of the technological process. At the same time, this obligation applies to a specific production area for which this employee is responsible. Control is carried out on the basis of the results of analyzes, readings of instruments that carry out control and measuring activities. Besides, this worker is obliged to control the proper technical condition of the equipment directly involved in production activities. For the purpose of analysis, these workers are often required to carry out direct sampling of products or to monitor the correct and timely implementation of said sampling. Finally, the QCD controller is obliged to be directly involved in the acceptance technical means and equipment after repairs, replacements, cleanings and other similar procedures.

An expert on product quality - this is also what you can call the controller of the Quality Control Department, staff member department of technical control.

Medium wage: 32000 rubles per month

Demand

Payability

Competition

entry barrier

prospects

QCD controller is a specialist who monitors the quality of products manufactured by the enterprise.

History reference

The profession of "controller" appeared in the 19th century. Moreover, “her birthday” can be established quite accurately - this is the time when engineer Henry Leland, who worked at the arms factory with Samuel Colt, organized a mandatory check of all shells in accordance with the standards. Often outwardly completely normal products that did not meet the reference sample were rejected.

Later, after creating his automobile company Cadillac, Leland Special attention paid attention to manufacturing accuracy and interchangeability of parts.

The innovative idea was quickly adopted by manufacturers of a wide variety of products. At plants and factories, positions were introduced responsible for product quality, and sometimes entire departments of technical control were created.

Description of the profession

Let's understand the question: OTK controller, what is it? A specially trained employee of the enterprise, before sending a batch of goods for sale, checks its compliance with certain approved standards. It can be:

GOSTs;
parameters specified in the technical documentation;
reference samples;
blueprints.

An employee of the technical control department inspects the product, evaluates it by eye. If necessary, he checks the parameters with the help of special equipment: a magnifying glass, a microscope, a caliper, gauges, a micrometer, etc. If everything is in order, then an appropriate stamp is put. If there are defects, the goods are rejected with an indication of the approximate reason for the marriage.

In addition to industrial enterprises, specialists in this area can find employment in research institutions and centers for certification, metrology and standardization.

What specialties to study

In secondary special educational institutions You can get this profession, taking into account the specific direction of the enterprise. After all, to test textiles and electrical appliances, you need different sets of qualities and knowledge. You can pay attention to such specialties:

controller of radio-electronic equipment and devices;
product processing quality controller;
inspector of machine and locksmith works, etc.

It is not difficult to enter a college, it is enough to have average grades in the certificate, and taking them into account, a competitive selection of applicants is carried out.

Educational establishments

The necessary skills can be obtained in secondary professional institutions. Colleges of training quality controllers in various fields:

Some enterprises train such specialists directly at the production site through individual-team training. This allows you to reduce time and give the employee the maximum amount of practical experience.

Responsibilities at work

Despite the specifics of the manufacture of various products, it is possible to distinguish general functions QCD controllers:

quality control of manufactured products at each stage of the production process;
making proposals for modernization and new methods of organizing product testing;
participation in the preparation of technical documentation;
assessment of the parameters of purchased raw materials, components, semi-finished products and materials;
monitoring the condition of tools, equipment, measuring instruments, as well as compliance with production technology;
control of compliance of finished products with predetermined parameters and identification of the causes of defects.

Also, the duties of the QCD employee may include the preparation of accompanying documentation (quality passports, defective statements, certificates), handling complaints. Such a specialist does a very useful job, protecting consumers from low-quality products.

Who suits

So, who is a production controller in terms of professional and personal qualities. This is a person who understands the technology of creating a thing or device, knows how to read drawings and technical documentation, draw up the necessary papers. He thoroughly knows the current GOSTs, understands mechanics, electronics and materials science.

The personal qualities required for this profession are as follows:

responsibility, care and composure;
technical mindset and analytical skills;
integrity and courage;
good memory and ability to concentrate;
the ability to clearly follow the instructions and "take a hit";
good vision.

How much do they get

On average, the salary of an employee of the technical control department is in the range from 30 to 35 thousand rubles. In some regions with developed industry, it can reach 50 thousand rubles.

How to build a career

At a good specialist there is a chance to become the chief foreman, and eventually head the control service of the workshop or the quality control department of the entire enterprise.

Prospects for the profession

The issue of product quality assurance is on the agenda for any self-respecting company, therefore, employees responsible for this area of work will always be in demand, since quality control of far from all products can be entrusted to automation, computers and robots.

Job description presented normative document, which defines the main duties, privileges and responsibilities of an employee of the enterprise in the exercise of his activities in the desired position.

What is a service instruction?

This type of document makes it possible to appropriately distribute the range of responsibilities, increase efficiency, reliability of execution of instructions, improve relationships between employees of the team, and determine the relationship of one employee with others. Also, the job description clearly defines the rights and obligations of employees, is able to increase responsibility in the team, stimulate employees, distribute duties evenly.

The service instruction is developed based on the control functions, qualification handbook, regulations, regulations and employee surveys. This document must be developed separately for each position, which is provided staffing. Any instruction includes several main sections: general provisions, directions, duties, privileges, responsibilities and relationships. Upon admission to work, the employee must be familiarized with the job description against signature.

Where is the job description used?

The service instruction is used at various stages of attracting an employee:

It is used in the selection of personnel at the time of hiring.
When familiarizing a new employee with his duties for faster adaptation at the enterprise.
Used for grading work.
For effective management worker's activities.
When appraising employees.
To identify the need for employee training.

QCD Controller

The technical control department is designed to detect timely violations during production. The person who is engaged in identifying defects and checking products so that they meet the standards is the QCD controller. The job description of the controller helps the employee to comply with his duties, informs about the responsibility.

This position will be appropriate for any manufacturing plant. No product should be left unchecked until it reaches the shelves. The job description of the controller includes such duties as control of finished products, checking the parameters of the manufactured goods with reference indicators, writing accompanying documentation, quality control, finding inconsistencies, proposals for improving production.

The QCD controller must have a higher or secondary technical education, have experience in this field and relevant knowledge and skills. He must also be able to manage various measuring and control devices, have attention to detail. For a more detailed acquaintance with all the nuances of the work, the job description of the controller is useful.

checkpoint controller

The controller of the checkpoint is subordinate to the head of the structural unit. Has no subordinates. He organizes access control at a protected facility. There are no special requirements regarding experience and education for this position.

The job description of the checkpoint controller includes the following duties:

Checking papers and passes passing through the checkpoint.
Control over the import and export of goods from the territory.
Participation in audits.
Inspection of things of violators.
Monitoring the operation of security system devices.
Notification of the immediate superiors about the alarm.
Detention of offenders.
Acceptance under protection from responsible persons of cabinets.

Controller-cashier

The controller-cashier reports to the senior cashier. He must master all the necessary methods of work in different cash registers enterprises. The controller-cashier must know the various regulations and orders of the management, documentation related to trade and cash transactions, banking documentation, rules for receiving, issuing and storing Money, rules for maintaining a cash book and so on.

The job description of the controller-cashier covers in more detail all the rights and functional responsibilities, as well as what kind of responsibility the employee bears for violation of certain rules, damage to property, loss of money and other material values. The mode of operation is determined in accordance with the PVTR.

Quality Controller

The Quality Control Manager reports directly to the Quality Director. There are no subordinates. The quality controller is obliged to constantly monitor the quality of the manufactured goods, which must comply with the norms, state and business standards. During the check, he uses special methods and tests, and as a result, he compiles a report on the results.

The job description of the quality controller includes the following responsibilities:

Drawing up a plan for spot checks.
Finished product testing.
Preparation of product quality documentation.
Quality control of raw materials.
Record keeping of inspections.
Identification of the reasons for marriage.
Participation in research and development of projects.

The quality controller must be a specialist in this field, have the appropriate education and work experience of at least twelve months in this field. The job description of the controller lists the duties: he must know the entire list of the enterprise's products, the technological process, devices, sampling rules, standards and conditions necessary for sampling.

Production controller

The production controller reports directly to the head of technical control. Must be guided during work by the provisions of technical control, job description, legislative acts. The production controller must have a higher education, work experience in this industry. He is obliged to monitor the quality of products, compliance with technological regimes, prevent the release of defects, follow the schedule of inspections, and so on. The job description of the production controller includes a more detailed list of responsibilities.

Also, the production controller has the right to determine the quality of the goods, demand the suspension of the production process, calculate the culprit of the marriage, participate in meetings, and so on. The job description of the controller can be supplemented with rights and obligations, depending on the type of production.

When getting a job, you should understand that no matter who you work with, you will have to fulfill the duties prescribed by the job description, and you will be punished for failure to do so.