Unified Tariff and Qualification Directory of Works and Professions of Workers (ETKS), 2019
Part No. 2 of issue No. 2 ETKS
The issue is approved by the Decree of the Ministry of Labor of the Russian Federation of November 15, 1999 N 45
(as amended by the Order of the Ministry of Health and Social Development of the Russian Federation of November 13, 2008 N 645)

Adjuster automatic lines and modular machines

§ 31. Adjuster of automatic lines and modular machines of the 4th category

Job Description. Adjustment of single-sided, double-sided, single-position, multi-position, one- or two-support modular machines with fixed and rotating horizontal and vertical tables, single-support multi-spindle modular machines and two-, four-sided machines (drilling, threading, milling for processing parts of medium complexity), milling and boring , drilling and boring and other similar machines for processing complex parts. Adjustment of special automatic machines for milling grooves of drills, automatic machines for sharpening drills and countersinks, broaching horizontal, vertical and other similar machines for internal and external broaching. Adjustment of the same type of electropulse, electrospark and ultrasonic machines and installations, generators, electrochemical machines according to the technological or construction map and the passport of the machine. Performing calculations related to the adjustment of serviced machines. Participation in the repair of machines. Establishment of technological sequence and processing modes. Installation special devices with alignment in several planes. Adjustment of machine tools, control machines and transport devices for a full cycle of processing simple parts with one type of processing. Processing of test parts and their delivery to the quality control department. Adjustment of the main mechanisms of the automatic line in the process of work; participation in current repair equipment and mechanisms of the automatic line; adjustment of captures of industrial manipulators (robots) with program control.

Must know: device, rules for checking the accuracy of modular and special machine tools, the interaction of automatic line mechanisms, technological process with one type of processing of parts on automatic line machines; device of the same type industrial manipulators; rules for checking manipulators for operability and positioning accuracy; methods of installation, fastening and alignment of complex parts; device and rules for the use of universal and special devices, instrumentation and instruments; fundamentals of metal technology within the scope of the work performed; mechanical properties of metals; geometry, rules for heat treatment, sharpening, finishing and installation of a normal cutting tool made of tool steels, and tools with inserts of hard alloys or ceramic; rules for choosing cutting modes; range of used metals and semi-finished products; system of tolerances and landings, degrees of accuracy; quality and roughness parameters.

§ 32. Adjuster of automatic lines and modular machines of the 5th category

Job Description. Adjustment of double-sided, multi-support, multi-spindle aggregate machines with an arbitrary or associated feed cycle for each support, with a circular rotary table for processing large complex parts or with an annular table for processing small complex parts. Adjustment of electropulse, electrospark and ultrasonic machines and installations of various types and power, electrochemical machines of various types and power with troubleshooting in the mechanical and electrical parts. Performing complex calculations related to setting up machines. Adjustment of machine tools, control machines and transport devices for a full cycle of processing simple parts (bushings, pistons, rollers, sleeves) with various types of processing (drilling, milling, turning, etc.). Adjustment of individual units of industrial manipulators (robots) with program control. Processing of test parts and their delivery to the quality control department. Monitoring the operation of the automatic line. Adjustment of the main mechanisms of the automatic line in the process.

Must know: kinematic diagrams and rules for checking the accuracy of processing single-sided and double-sided, multi-support, multi-spindle and other complex modular and special machines; interaction of automatic line mechanisms; design features of universal and special devices, equipment; rules for setting up and regulating control and measuring instruments and devices; rules for calculating gears, eccentrics, copiers and cams; geometry, heat treatment rules, sharpening and finishing of normal and special cutting tools; device of various industrial manipulators.

§ 33. Adjuster of automatic lines and modular machines of the 6th category

Job Description. Adjustment of multi-sided, multi-position, multi-slide, multi-spindle aggregate machines with an arbitrary or associated feed cycle for each support for processing complex and large parts. Adjustment of vacuum pumps and prorolling pumps. Performing complex calculations related to setting up serviced machines. Adjustment of machine tools, control machines and transport devices of an automatic line for a full cycle of processing (drilling, milling, turning, etc.) of complex and large-sized parts (engine cylinder blocks, housings, crankcases, gearboxes) with a large number of transitions and operations. Ensuring the smooth operation of the automatic line. Adjustment and regulation of equipment and mechanisms of the automatic line in the process of work. Adjustment and adjustment of manipulators (robots) with program control.

Must know: design of multi-sided, multi-position, multi-support, multi-spindle aggregate machines and automatic line mechanisms; rules for checking aggregate machines for processing accuracy; ways to identify and eliminate problems in the operation of machines; methods of installation, fastening and alignment of complex parts and the necessary universal and special devices; rules for determining cutting conditions according to manuals and passports of machine tools; fundamentals of the theory of cutting metals within the limits of the work performed.

Average required professional education.

§ 34. Adjuster of automatic lines and modular machines of the 7th category

Job Description. Adjustment and adjustment at idle and in working mode of automatic lines, consisting of multi-sided, multi-position, multi-support, multi-spindle aggregate machines for processing complex and large parts with adjustment of electromechanical, hydraulic and other power drives, control and measuring systems and automatic lines for castings wet and dry molding. Carrying out diagnostics and prevention of malfunctions of all systems and equipment units and performing work on their repair.

Must know: arrangement of various automatic lines for processing parts and assembly units; arrangement of control and measuring instruments and devices; methods of performing work on the diagnosis and repair of malfunctions of all equipment systems.

Requires secondary vocational education.

§ 35. Adjuster of automatic lines and modular machines of the 8th category

Job Description. Complex adjustment and adjustment at idle and in working mode of automatic lines with flexible production links, consisting of multi-sided, multi-position, multi-support, multi-spindle aggregate machines for processing parts and assembly units, and their semi-automatic and automatic casting machines and units with the repair of complex components, units and systems.

Must know: the design of various automatic lines, special devices and other equipment for processing high-precision, unique parts and for processing castings; methods of repair and assembly of units, mechanisms and devices of all equipment systems.

Requires secondary vocational education.

This manual has been translated automatically. Please note that automatic translation does not provide 100% accuracy, so there may be minor translation errors in the text.

Instructions for the position " Adjuster of automatic lines and modular machines of the 6th category", presented on the site, complies with the requirements of the document - "DIRECTORY qualification characteristics occupations of workers. 42 issue. Metal processing. Part 1. Managers, professionals, specialists, technical employees. Part 2. Workers. Book 1. "Metal casting", "Metal welding". Book 2. "Drawing, squeezing, cold stamping metal. Manufacture of heating boilers, metal tanks and similar products", "Forging, high- and low-temperature processing of metal". Book 3. "Turning, drilling, milling and other types of processing of metals and materials", "Coating metals with metals. Coloring". Book 4. "Coating of metals with non-metals: enameling and other types of coating", "Locksmith and assembly work in the production of machines"", which was approved by order of the Ministry of Industrial Policy of Ukraine on March 22, 2007 N 120. Agreed by the Ministry of Labor and social policy Ukraine. Entered into force in April 2007 The status of the document is "valid".

Foreword

0.1. The document comes into force from the moment of its approval.

0.2. Document developer: _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _.

0.3. Document approved: _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _.

0.4. Periodic check this document produced at intervals not exceeding 3 years.

1. General Provisions

1.1. The position "Adjuster of automatic lines and modular machines of the 6th category" belongs to the category "Workers".

1.2. Qualifications- incomplete higher education(junior specialist) without requirements for work experience or vocational education, advanced training and work experience by profession as an adjuster of automatic lines and modular machines of the 5th category - at least 1 year.

1.3. Knows and applies:
- design of multi-sided multi-position, multi-support, multi-spindle aggregate machines and automatic line mechanisms;
- rules for checking aggregate machines for processing accuracy;
- methods for detecting and troubleshooting machine tools;
- methods of installation, fastening and reconciliation of particularly complex parts and the necessary universal and special devices;
- rules for determining cutting conditions for reference books and passports of machines;
- the basics of the theory of metal cutting within the scope of the work that it performs.

1.4. The adjuster of automatic lines and modular machines of the 6th category is appointed to the position and dismissed from the position by order of the organization (enterprise / institution).

1.5. The adjuster of automatic lines and modular machines of the 6th category reports directly to _ _ _ _ _ _ _ _ _ _ .

1.6. The adjuster of automatic lines and modular machines of the 6th category directs the work of _ _ _ _ _ _ _ _ _ _ .

1.7. The adjuster of automatic lines and modular machines of the 6th category during the absence, is replaced by a person appointed in in due course which acquires the relevant rights and is responsible for the proper performance of the duties assigned to it.

2. Description of work, tasks and job responsibilities

2.1. Establishes multi-sided, multi-position, multi-spindle, multi-spindle machines with an arbitrary or associated feed cycle for each support for processing particularly complex, large and critical parts.

2.2. Adjusts vacuum pumps and pumps of prorolling.

2.3. Performs particularly complex calculations related to the adjustment of the machines that he services.

2.4. Adjusts machine tools, control machines and transport devices of an automatic line for a full cycle of processing (drilling, milling, turning) of complex and large-sized parts (engine cylinder blocks, housings, crankcases, gearboxes) with a large number of transitions and operations.

2.5. Ensures uninterrupted operation of the automatic line.

2.6. Adjusts and regulates the equipment and mechanisms of the automatic line in the course of work.

2.7. Adjusts and regulates manipulators (works) with program control.

2.8. Knows, understands and applies the current regulatory documents relating to its activities.

2.9. Knows and complies with the requirements of normative acts on labor protection and environment, complies with the norms, methods and techniques for the safe performance of work.

3. Rights

3.1. The adjuster of automatic lines and modular machines of the 6th category has the right to take actions to prevent and eliminate cases of any violations or inconsistencies.

3.2. The adjuster of automatic lines and modular machines of the 6th category has the right to receive all social guarantees provided for by law.

3.3. The adjuster of automatic lines and modular machines of the 6th category has the right to demand assistance in the performance of his official duties and exercise of rights.

3.4. The adjuster of automatic lines and modular machines of the 6th category has the right to demand the creation of organizational and technical conditions necessary for the performance of official duties and the provision necessary equipment and inventory.

3.5. The adjuster of automatic lines and modular machines of the 6th category has the right to get acquainted with the draft documents relating to his activities.

3.6. The adjuster of automatic lines and aggregate machines of the 6th category has the right to request and receive documents, materials and information necessary for the performance of his duties and instructions of the management.

3.7. The adjuster of automatic lines and aggregate machines of the 6th category has the right to improve his professional qualifications.

3.8. The adjuster of automatic lines and modular machines of the 6th category has the right to report all violations and inconsistencies identified in the course of his activities and make proposals for their elimination.

3.9. The adjuster of automatic lines and modular machines of the 6th category has the right to get acquainted with the documents defining the rights and obligations for the position held, the criteria for assessing the quality of the performance of official duties.

4. Responsibility

4.1. The adjuster of automatic lines and modular machines of the 6th category is responsible for the failure to fulfill or untimely fulfillment of the duties assigned by this job description and (or) non-use of the rights granted.

4.2. The adjuster of automatic lines and modular machines of the 6th category is responsible for non-compliance with the rules of internal work schedule, labor protection, safety measures, industrial sanitation and fire protection.

4.3. The adjuster of automatic lines and modular machines of the 6th category is responsible for disclosing information about the organization (enterprise / institution) that is a trade secret.

4.4. The adjuster of automatic lines and modular machines of the 6th category is responsible for non-fulfillment or improper fulfillment of the requirements of internal normative documents organizations (enterprises/institutions) and legal orders of management.

4.5. The adjuster of automatic lines and modular machines of the 6th category is responsible for offenses committed in the course of his activities, within the limits established by the current administrative, criminal and civil legislation.

4.6. The adjuster of automatic lines and modular machines of the 6th category is responsible for causing material damage organization (enterprise/institution) within the limits established by the current administrative, criminal and civil legislation.

4.7. The adjuster of automatic lines and modular machines of the 6th category is responsible for the misuse of the granted official powers, as well as their use for personal purposes.

Added to site:

1. General requirements for labor protection

1.1. Persons at least 18 years of age who have completed training in the profession, introductory and primary instruction in labor protection, special training, internships at the workplace and who have received admission to independent work, who have 1 electrical safety group, are allowed to work independently.

1.2. Primary briefing on labor protection, including safe working methods, is carried out by the foreman directly at the workplace.

Repeated briefing on labor protection is carried out at least 1 time in 3 months. Repeated briefing on electrical safety at least once every 12 months.

Periodic training and testing of knowledge of the requirements is carried out at least once every 12 months.

1.3. On the territory of the enterprise, it is necessary to comply with the Internal Labor Regulations of the enterprise, be attentive to moving vehicles and working hoisting machines.

1.4. It is necessary to comply with the work and rest regime established at the enterprise.

Normal working hours may not exceed 40 hours per week. Overtime allowed in cases provided for by the Labor Code of the Russian Federation.

The total time for rest and natural needs during the shift is 45 minutes, not counting the lunch break.

1.5. When working on an automatic line, the adjuster may be exposed to the following hazardous production factors:

Sharp edges, burrs of parts, workpieces and tools, chips flying off the part can lead to injury;

High surface temperatures of workpieces and tools can cause injury;

Moving parts of equipment and machinery can cause injury;

Moving workpieces, parts, products can cause injury;

An increased level of voltage in an electrical circuit, the closure of which can occur through the human body, can lead to electrical injury.

Possible exposure to the following harmful production factors:

Oil, abrasive dust, noise, which can lead to skin, respiratory and hearing diseases.

1.6. For normal and safe adjustment work on the automatic line, the adjuster must use the following personal protective equipment:

	Individual protection means		Wear time (months)
	Cotton suit
	Boots leather
	Goggles		Before wear

1.7. The employee must undergo a fire safety briefing at least once every 3 months, know the rules of conduct during a fire.

1.8. The employee must immediately notify his immediate or superior manager of any situation that threatens the life and health of people, of each accident that occurred at work or of a deterioration in his health, including the manifestation of signs of an acute occupational disease (poisoning).

1.9. The employee must provide the first aid to victims of injury, poisoning or sudden illness. first aid.

1.10. It is necessary to observe the rules of personal hygiene, wash hands with cleansing paste and soap before eating.

1.11. Persons who violate these instructions are liable in accordance with the legislation of the Russian Federation.

2. Occupational safety requirements before starting work

2.1. Put work clothes in order: fasten cuffs, tuck clothes in so that there are no waving ends, put hair under a tight-fitting headdress.

2.2. Prepare individual means protection (glasses), wipe the lenses of the glasses and check for cracks on the glasses.

2.3. Prepare workplace to safe work and clear the aisles.

2.4. Check the availability of cutting and measuring tools and devices at the workplace.

2.5. The floor must be level, without potholes or protruding tiles.

2.6. Check the serviceability of the foot wooden grating, make sure it is stable and there are no broken planks.

2.7. Check the presence, serviceability and strength of fastening:

a) gear guards, drive belts etc.;

b) safety devices for protection against chips and oil;

c) grounding devices;

d) devices for fastening tools;

e) oil in lubricators, add it if necessary.

2.8. Make sure there are no exposed wires.

2.9. Make sure by external inspection that the moving parts of the machines and transport of automatic lines are in good condition.

2.10. Check the reliability of fastening and centering of the cutting tool.

2.11. Before turning on the automatic line, check for foreign objects that interfere with the start-up and operation of the mechanisms, and only after that check the operation of the machines at idle.

2.12. Check the health of the lubrication and cooling system. Make sure that the lubricant and coolant supply is normal and uninterrupted.

2.13. Before each switching on of the automatic line, check that its start-up does not endanger anyone.

2.14. Check for availability. Make sure that the used blanks and containers are placed safely, conveniently, stably, without blocking the aisles and driveways.

2.15. Check serviceability lighting fixtures external inspection.

2.16. Check the operation of the ventilators.

3. Labor protection requirements during work

3.1. Comply with the requirements set out in the operating manual for the line.

3.2. Perform only the work that is entrusted by the foreman or work manager and authorized by the workshop administration.

3.3. During work, be attentive, do not be distracted from your direct duties, do not distract others with any business or conversation that is not related to work.

3.4. To provide correct installation on the machine fixtures and workpieces, clean the base surfaces from chips and oil.

3.5. The workpiece must be securely clamped in the fixtures.

3.7. When adjusting (sub-adjusting), the removed parts of the machine and parts must be placed on prepared racks and stands.

3.8. Do not take measurements of the part without waiting for the complete end of the cycle of the machine and the stop of the movement of the measured part or tool. Do not make adjustments to machines while they are running.

3.9. It is not allowed to work on the automatic line in mittens, gloves and with bandaged hands.

3.10. Do not use compressed air to clean the machine or base surfaces.

3.11. After completing the adjustment (sub-adjustment), check if there are any hand tools left in the machine mechanisms, fasteners and other extraneous items.

3.12. Avoid cluttering the workplace, aisles with parts, blanks, containers, as well as foreign objects.

Be sure to stop the line and take the tool out of service when:

Leaving the machine even for a short time;

Temporary suspension of work;

power interruptions;

Installation, removal and reinstallation of parts;

Cleaning, lubricating and cleaning the machine;

Checking the cutting tool;

Detection of any malfunctions in the operation of the equipment.

3.13. When the machine is turned on, do not open the guards of the moving elements of the machine that require periodic access when setting up, changing belts, etc.

3.14. Do not allow persons who are not related to the work entrusted to you to enter your workplace.

3.15. In case of a painful condition, inform the manager about the poor health, stop work and go to the health center.

3.16. When setting up automatic line equipment, a poster “Do not turn on - people are working!” must be posted on the control panel or input switch.

3.17. Do not climb over conveyors and automatic lines - use the passages provided for this.

3.18. Do not take part measurements during the automatic line cycle. If necessary, switch the line to the adjustment mode.

3.19. During the operation of the line in automatic and adjustment mode, do not touch the moving parts of the machine, tool, workpiece and moving elements of transport.

3.20. Do not remove chips from machines and transport of the automatic line by hand. Use the method provided by the technology.

3.21. Make sure that the trenches of the chip conveyors are covered with gratings along the entire length of the gaps between the machines of the automatic line. All covers, shields and guards removed for adjustment or repair must be reinstalled upon completion of work.

3.22. moving parts Vehicle, which are sources of danger, are protected, with the exception of parts, the protection of which is impossible for their functional purpose.

3.23. Elements and parts of vehicles should not have traumatic sharp corners and surfaces with irregularities, which are a potential source of danger.

4. Labor protection requirements in emergency situations

4.1. In the event of equipment malfunctions (failure to work, extraneous noise and knocking, breakdowns that threaten an accident, power outages, foreign smells), it is necessary to stop using the equipment, turn it off. It is necessary to notify the surrounding people and the immediate supervisor of the work about the danger and do not start work until the malfunctions are eliminated. It is forbidden to troubleshoot yourself.

4.2. In the event of a fire or signs of burning, immediately inform the fire brigade by phone ...., inform the foreman or a higher manager and start extinguishing the fire with the available fire extinguishing equipment. If necessary, call the city fire department by phone 112, arrange a meeting of the fire brigade.

4.3. stop work, notify the master to provide first aid to the victims and contact the health center in person or call ....

Ensure the safety of the situation of an accident or an accident, if this does not pose a danger to the life and health of people and does not lead to an aggravation of the emergency. Call an ambulance if necessary medical care by phone 112.

4.4 In the event of an accident in water supply systems, heating, etc. hindering the performance of technological operations, stop work until the elimination of the accident and its consequences.

5. Labor protection requirements upon completion of work

5.1 Stop the running equipment, turn off the electric motor,
de-energize the equipment by turning off the input switch.

5.2 Tidy up the workplace, put away the tools and fixtures in the allotted place, put away production waste (rags, sawdust, spilled chips) in the established container according to the marking.

5.3 Hand over the equipment to the shifter or foreman, report all
comments and malfunctions in the work and the measures taken to eliminate them.

5.4 Put clothes in a special place, wash hands with warm water and soap or take a shower.

APPROVE:

________________________

[Job title]

________________________

________________________

[Name of company]

________________/[FULL NAME.]/

"____" ____________ 20__

JOB DESCRIPTION

Adjuster of automatic lines and modular machines of the 4th category

1. General Provisions

1.1. Real job description determines and regulates the powers, functional and official duties, rights and responsibilities of the adjuster of automatic lines and modular machines of the 4th category [Name of organization in the genitive case] (hereinafter referred to as the Company).

1.2. The adjuster of automatic lines and modular machines of the 4th category is appointed to the position and dismissed from the position in the established current labor law by order of the head of the Company.

1.3. The adjuster of automatic lines and modular machines of the 4th category belongs to the category of workers and reports directly to [position title of the immediate supervisor in the dative case] of the Company.

1.4. Adjuster of automatic lines and modular machines of the 4th category is responsible for:

• timely and high-quality performance of tasks for their intended purpose;
• compliance with performance and labor discipline;
• observance of labor safety measures, maintenance of order, compliance with fire safety rules at the work site (workplace) entrusted to him.

1.5. A person with a secondary vocational education in this specialty and work experience of at least 1 year is appointed to the position of an adjuster of automatic lines and modular machines of the 4th category.

1.6. In practice, the adjuster of automatic lines and modular machines of the 4th category should be guided by:

• local acts and organizational and administrative documents of the Company;
• internal labor regulations;
• rules of labor protection and safety, ensuring industrial sanitation and fire protection;
• instructions, orders, decisions and instructions of the immediate supervisor;
• this job description.

1.7. The adjuster of automatic lines and modular machines of the 4th category must know:

• device, rules for checking the accuracy of modular and special machine tools, the interaction of automatic line mechanisms, a technological process with one type of processing of parts on automatic line machines;
• device of the same type industrial manipulators;
• rules for checking manipulators for operability and positioning accuracy;
• methods of installation, fastening and alignment of complex parts;
• device and rules for the use of universal and special devices, instrumentation and instruments;
• fundamentals of metal technology within the scope of the work performed;
• mechanical properties of metals;
• geometry, rules for heat treatment, sharpening, finishing and installation of normal cutting tools made of tool steels and tools with hard alloy or ceramic inserts;
• rules for choosing cutting modes;
• range of used metals and semi-finished products;
• system of tolerances and landings, degrees of accuracy;
• quality and roughness parameters.

1.8. During the period of temporary absence of the adjuster of automatic lines and modular machines of the 4th category, his duties are assigned to [name of the position of the deputy].

2. Job responsibilities

The adjuster of automatic lines and modular machines of the 4th category performs the following labor functions:

2.1. Adjustment of single-sided, double-sided, single-position, multi-position, one- or two-support modular machines with fixed and rotating horizontal and vertical tables, single-support multi-spindle modular machines and two-, four-sided machines (drilling, threading, milling for processing parts of medium complexity), milling and boring , drilling and boring and other similar machines for processing complex parts.

2.2. Adjustment of special automatic machines for milling grooves of drills, automatic machines for sharpening drills and countersinks, broaching horizontal, vertical and other similar machines for internal and external broaching.

2.3. Adjustment of the same type of electropulse, electrospark and ultrasonic machines and installations, generators, electrochemical machines according to the technological or construction map and the passport of the machine.

2.4. Performing calculations related to the adjustment of serviced machines.

2.5. Participation in the repair of machines.

2.6. Establishment of technological sequence and processing modes.

2.7. Installation of special devices with alignment in several planes.

2.8. Adjustment of machine tools, control machines and transport devices for a full cycle of processing simple parts with one type of processing.

2.9. Processing of test parts and their delivery to the quality control department.

2.10. Adjustment of the main mechanisms of the automatic line in the process of work; participation in the current repair of equipment and mechanisms of the automatic line; adjustment of captures of industrial manipulators (robots) with program control.

In case of official necessity, the adjuster of automatic lines and modular machines of the 4th category may be involved in the performance of duties overtime, in the manner prescribed by law.

3. Rights

The adjuster of automatic lines and modular machines of the 4th category has the right:

3.1. Get acquainted with the draft decisions of the management of the enterprise relating to its activities.

3.2. Submit proposals for the management to improve the work related to the responsibilities provided for in this job description.

3.3. Notify the immediate supervisor of any deficiencies identified in the course of the performance of their duties in production activities enterprise (its structural subdivisions) and make proposals for their elimination.

3.4. Request personally or on behalf of the immediate supervisor from the heads of enterprise departments and specialists information and documents necessary for the performance of their duties.

3.5. Involve specialists from all (separate) structural divisions of the Company in solving the tasks assigned to him (if this is provided for by the provisions on structural divisions if not, with the permission of the head of the Company).

3.6. Require the management of the enterprise to assist in the performance of their duties and rights.

4. Responsibility and performance evaluation

4.1. The adjuster of automatic lines and modular machines of the 4th category bears administrative, disciplinary and material (and in some cases provided for by the legislation of the Russian Federation - and criminal) responsibility for:

4.1.1. Non-fulfillment or improper fulfillment of official instructions of the immediate supervisor.

4.1.2. Failure or improper performance of labor functions and the tasks assigned to him.

4.1.3. Unlawful use of the granted official powers, as well as their use for personal purposes.

4.1.4. Inaccurate information about the status of the work entrusted to him.

4.1.5. Failure to take measures to suppress the identified violations of safety regulations, fire and other rules that pose a threat to the activities of the enterprise and its employees.

4.1.6. Failure to enforce labor discipline.

4.2. Evaluation of the work of the adjuster of automatic lines and modular machines of the 4th category is carried out:

4.2.1. The immediate supervisor - regularly, in the course of the daily implementation by the employee of his labor functions.

4.2.2. Certification Commission enterprises - periodically, but at least once every two years based on the documented results of work for the evaluation period.

4.3. The main criterion for evaluating the work of an adjuster of automatic lines and aggregate machines of the 4th category is the quality, completeness and timeliness of his performance of the tasks provided for in this instruction.

5. Working conditions

5.1. The mode of operation of the adjuster of automatic lines and modular machines of the 4th category is determined in accordance with the internal labor regulations established by the Company.

5.2. In connection with the production need, the adjuster of automatic lines and aggregate machines of the 4th category is obliged to travel to business trips(including local values).

Acquainted with the instruction __________ / ____________ / "____" _______ 20__