Association KAMI
Industry:
Wholesale industrial equipment
Competence:
Solution:
Manufacturing plant management 1.3
Association "KAMI" - is an association of leading suppliers of industrial equipment, industrial enterprises Russia, equipment manufacturers, industry universities and research institutes. The need of the enterprise was the introduction of a specialized scheme of management and accounting based on the functions of the solution 1C Management of a manufacturing enterprise.
JSC "ELTEZA"
Industry:
Production of electrical equipment
Competence:
Accounting
Solution:
1C: Manufacturing Enterprise Management 1.3
JSC "ELTEZA" is a diversified company that has all the technical and technological capabilities for the production of modern electrical equipment, electronic and microprocessor devices, as well as train traffic control and security systems rail transport. The company's specialists implemented a number of projects in such areas as: work with controlled transactions, cost calculation, work with raw materials supplied by the customer.
ENERGOTECHMONTAZH
Industry:
Construction
Competence:
Management Accounting. Document flow
Solution:
1C:Manufacturing enterprise management, 1C:Document management
The Energotekhmontazh group of companies is a highly professional and rapidly developing enterprise in the field of power supply, heat supply, water supply, gasification and road construction. The finalization and implementation of the configuration Production Enterprise Management, Document Management was carried out.
WIMCOM
Industry:
Telecommunications
Competence:
Management Accounting. Accounting, Calculation wages
Solution:
1C: Manufacturing enterprise management, 1C: Enterprise accounting, 1C: Payroll and personnel management
The Vimcom company - specializes in solutions for the creation of multiservice broadband networks, provides a full range of services from pre-project survey to construction and technical support. During the project, improvements were made to the management information system based on the configuration and 1C: Managing a manufacturing enterprise, integration with the configurations 1C: Payroll and personnel management and 1C: Enterprise accounting was carried out.
CJSC "PROCONTAINER"
Industry:
Project activities and consulting
Competence:
Warehouse accounting, production accounting, rent
Solution:
1C: Management small firm
CJSC "PROCONTAINER" is the largest refrigerated container supplier in Russia. A company specializing in the service of refrigerated container units. Customization of the 1C: UNF software product was carried out. For the needs of the customer, the blocks of warehouse accounting, service work, production and rental were finalized. A feature of the company's accounting was the assignment of identification numbers to equipment and tracking the full cycle of its life.
VTS JETS LLC
Industry:
Maintenance and repair of aviation equipment
Competence:
Management and operational accounting
Solution:
1C: Small business management 1.6
The company LLC "VTS Jets" carries out service work on the repair and maintenance of aircraft. The system needed to implement a business chain of documents to reflect transactions. The company made customization of the 1C: UNF software product. The blocks of service work, personnel accounting, warehouse accounting and the pricing block were finalized in the system. The information system was brought to ISO 9001 quality standards, which are used in the work of the customer.
Company "FAIR PAY"
Industry:
Production
Competence:
Management Accounting. Accounting, payroll
Solution:
1C: Trade management, 1C: Enterprise accounting, 1C Salary and personnel management
Company "FAIR PAY" presents payment terminals own production. In addition to self-produced payment machines for accepting cash payments, the company produces Internet kiosks and a Content kiosk. Was held complex automation management, accounting and payroll. As part of the project, data was transferred from the previously used warehouse accounting program, a set of improvements to the used configurations was completed to meet the needs of the company. Conducted employee training.
EUROMASTER LLC
Industry:
Production
Competence:
Management Accounting, Accounting
Solution:
1C: Trade management 10.3
EUROMASTER LLC is one of the largest producers of ready-mixed concrete in the south of the Moscow Region. The main principle of the company's work is the maximum consideration of all the interests of partners in the development of production options, delivery terms, prices, terms and types of payment. A comprehensive automation of the workplaces of the dispatcher and operator was carried out, with the possibility of identifying orders by barcodes in loading coupons and integrating the accounting program with the plant management system. As well as the automation of the workplace of the sales manager.
MATRIX GROUP OF COMPANIES
Industry:
Production
Competence:
Operational, personnel, regulated accounting
Solution:
1C: Integrated automation
The MATRIX group of companies is a diversified engineering and manufacturing enterprise, which performs work and provides services for the creation, reconstruction and modernization of automated process control systems for facilities in various industries. Implementation of 1C: Complex automation. During the project, the following tasks were solved: finalizing the configuration for the needs of the company, transferring data from previously used accounting systems, installing and configuring, training MATRIX employees to work with the new information system.
SHP LLC "MOLOKO TYRNOVO"
Industry:
Competence:
Solution:
1C: Payroll and personnel management, 1C: Enterprise accounting
SHP LLC "MOLOKO TYRNOVO" - production of dairy products. The company carried out automation of accounting and payroll. Within the framework of the project, a methodology for using the information system was developed, taking into account industry specifics.
JSC "Ostankino MEAT PROCESSING PLANT" (JSC "OMPK")
Industry:
Production
Competence:
Accounting, management and personnel accounting
Solution:
1C: Accounting of the enterprise, 1C: Salary and enterprise management
OJSC Ostankino Meat Processing Plant (OJSC OMPK) is a leading manufacturer of processed meat products and semi-finished products in central Russia. Under the needs of the customer, the "Inventory" block, the list of reports have been finalized, a non-standard exchange between PPs has been configured.
LLC "BROK-BETON"
Industry:
Production
Competence:
Trade, production, operational accounting.
Solution:
ITS CONSULTANT: Concrete plant management
LLC "BROK-BETON" - production of ready-mixed concrete of all grades, mortars, sand concrete, wall, foundation and facing blocks, well rings and various landscape products (paving stones, curbs, etc.). In the course of the project, sections were automated: operational accounting of actual production costs, accounting of transport, accounting of documents, control of receipt and disposal of materials and finished products.
LLC "MFO ALLIANCE"
Industry:
Competence:
Accounting, management and personnel accounting
Solution:
1C: Accounting of the enterprise, 1C: Salary and management of the enterprise, Management of a microfinance organization.
LLC "MFO-ALLIANCE" - Financial intermediation, tender loans, bank guarantees. Software products have been modified to meet the needs of the customer " Bank guarantees", "Tender loans". A project was implemented for the customer to finalize the existing information system. The goal of the project was to adapt the information system to the new direction of the company's activities, as well as optimize existing automation circuits. During the project, all goals were achieved.
LLC MFO "JET MONEY MICROFINANCE"
Industry:
Competence:
Personnel accounting
Solution:
1C: Salary and personnel management 3.0
LLC MFO "JET MONEY MICROFINANCE" - provides high-tech and high-quality services in the field of microfinance using a modern arsenal of banking lending technologies and IT tools. Transition from 1C: Salary and personnel management version 2.5 to version 3.0 was made with the preservation of documents and improvements
PJSC "VOLGA CAPITAL"
Industry:
Competence:
Accounting, management accounting
Solution:
1C: Accounting of the enterprise, 1C: Payroll and personnel management
PJSC "VOLGA CAPITAL" is an infrastructure company that works on financial market, operating as a market maker, specializes in exchange transactions and direct investments in its own projects. The company is a liquidity provider for all market participants on the NYSE, CME, Moscow Exchange. Comprehensive service maintenance of the information base system of the company is carried out.
OOO "STROYDOMSERVIS"
Industry:
Construction
Competence:
Production
Solution:
ITS Consultant: Concrete Plant Management
StroyDomService LLC is one of the largest developers in New Moscow. The company provides a full range of services related to the development and implementation of large investment projects. The main distinguishing feature of Investtrust is the integrated development of the territory and the use of advanced technologies. The following tasks were solved at the enterprise: operational control over all stages of the plant, increasing the transparency of the processes taking place at the enterprise, quality control of products and services, integration of the plant into a common information system, integration with the payment system.
What is ITS 1C subscription verification (information technology support) and why is it needed? The answer is simple. This is a guarantee of your peace of mind, namely that you use this service completely legally.
It is very easy to check this.
By following this link ITS 1C subscription check AT you will see a window in which you need to enter registration number software product for which the ITS 1C agreement is concluded:
You can take it from the registration card that you should have received when purchasing the software product:
If a ITS subscription 1C is framed, the following message will appear:
Checking for a 1C:ITS contract
If the ITS 1C subscription is not issued, another message will appear:
Checking for a 1C:ITS contract
But you should not make hasty conclusions if a message appears that your ITS 1C subscription has not been registered under your registration number. Perhaps the partner with whom you have entered into an agreement has only sent an application for registration today. The 1C server processes the received information during the day. So try again the next day. If nothing changes, you can safely call your supplier with the question: “Why is the ITS 1C subscription not registered with our registration number?”
With the concluded ITS 1C agreement, you are provided with:
- Monthly magazine BUKH. 1C;
- Disc, except for the online version;
- Souvenir (depending on the type of contract);
- Performing work to update your configuration (depending on the type of contract);
- Properly executed document on the implementation for the month.
- Providing access to sites:
- http://users.v8.1c.ru - for downloading or automatically updating 1C databases (in the field the user code must be indicated registration number software product purchased by you);
How to check the licensedness of 1C programs?
Introduction
This article is written to help you identify and recognize pirated (illegal, unlicensed, counterfeit) copies software products economic purpose of the company "1C", as well as explain the main differences between pirated and legal products.
About the company "1C", Moscow
The company "1C" was founded in 1991 and ranks first among companies Russian industry involved in the distribution of software. The company specializes in distribution, support and development software business and home use.
Corporate website of the company www.1c.ru
About the company "1C-Account Timbal"SRL, Chisinau
The only regional distributor in Moldova offers centralized promotion of a wide range of programs for office and home in the regions. The distributor undertakes the functions of delivering goods, maintaining the consultation line, as well as creating standard solutions adapted in accordance with the legislation of the Republic of Moldova.
Official website of the company www.1 cmd. md
How to check the licensedness of 1C programs?
A licensed copy is that copy of the software product that is used in compliance with all the rules established by the copyright holder.
The overwhelming majority of software products of the copyright holder, 1C, consist of a platform and a configuration.
Platform "1C" is a specific set of functions that can be supported by your program. If there is no platform in the software package, then these features will not be available. At the same time, the platform itself only provides the system with certain capabilities, but in order for them to be really used, they must be configured in the installed 1C configuration.
Configuration "1C" is the most important concept for the user. A configuration is a setting for 1C:Enterprise to work in a specific area. Without a configuration, "1C:Enterprise" is only a set of potential features, but you won't be able to work in them. Users usually use "standard" configurations, which are supplied as part of software products and are completely ready for use.
Since 2016, “electronic deliveries” of some software and client licenses have been put into circulation .
Electronic delivery 1C contains a distribution kit of the software product in the form of a zip archive, each copy has its own registration number and pin code, which is used both to activate the software product and to register the product on the 1C: ITS portal.To install the program on a computer, you need to unzip the archive and run autorun.exe. Further in the dialog, you can install the program completely "in one click" or choose to install it in parts, as well as view the documentation and accompanying materials.The electronic delivery of client licenses includes instructions for obtaining licenses, a registration number, a set of pin codes for license activation and a separate pin code for registering on the 1C: ITS portal. The number of pincodes for license activation depends on the number of jobs. Documentation and accompanying materials are supplied in the same format as documentation on the 1C:Enterprise 8 platform and applied solutions is published on its.1c.ru resource. The book has a hierarchical structure ("tree"), consisting of chapters, with each chapter being, in turn, a node of the hierarchical structure. This view allows you to immediately see the contents of the book and quickly jump to the desired chapter.
It is possible to determine the licensedness of the 1C program by two types of signs: external and actual. At the same time, external signs indicate which 1C software products you can use, and the actual ones confirm that exactly the program for which you have the right is used.
The main features of the licensing of programs "1C":
A running 1C program on a local computer or on a network must be used legally (without hacks and emulators) and also have confirmation of its license (the presence of a registration form and a security key) and the absence of unlicensed features (key emulators).
As a rule, platforms are protected from unauthorized use by an electronic key. The licensedness of the configuration is confirmed by the registration form and documents evidencing the legal acquisition of the software (tax invoice). To determine the licensing features of the configuration you have installed, we recommend that you contact the specialists of the 1C partner network firms.
This manual discusses standard 1C software products (platform + typical configuration created by 1C). For different 1C platforms, completely different configurations can be written, based on the accounting conditions in specific economic sectors. And the authors of such configurations can be, respectively, various developers, not necessarily 1C employees. At the same time, developers can determine their own rules for using software products, so they are not considered within the scope of this manual.
A brief algorithm for checking the licensedness of programs "1C"
A) We define external signs.
B) We compare external signs with actual ones:
We find all the 1C programs installed on the computer.
We check the performance of the detected programs.
We check the actually installed programs.
We check the programs "1C" for the presence of a key.
We make sure that there is no key emulator.
We are convinced that there are no violations, and all 1C programs are used legally.
A) External signs of licensing
External features include a kit, usually containing:
Registration form;
The key is protected from unauthorized access;
Registration number;
1 or 2 disks of an economic program;
Box "1C";
Documentation for the program (from 2 to 12 books);
Tax invoice (with the correct indication of the name of the product);
Brand AGEPI
Registration form
Version 8
Versions 7.7
The 1C registration form (Figure 2) is the main document certifying the authenticity of the 1C program installed on a personal computer. All installed and running 1C programs must have a registration form. Distinctive features of the registration form:
a yellow form consisting of 2 (for "1C: Enterprise 7.7") or 3 parts (for "1C: Enterprise 8"), one of which indicates the full name of the product (1) and registration number (2). This part remains with the user and is a confirmation that he has the right to use this software product, and the other part of the questionnaire is intended directly for registering the program and transferred to 1C. In the case of "1C:Enterprise 8", the third (middle) part of the questionnaire also remains with the user.
By the way, do you know what is the meaning of registration? 1C provides users of 1C system products with full support: updating releases and discounts when purchasing newer versions of products. But you can get such benefits only by registering your program with 1C.
In order to register, send the completed part of your registration form by mail or a simpler way - give it to the 1C: Franchisee company from which you bought the program, or to the 1C distributor in your region for fast and accurate entry of your data into the database 1C users. You can contact the same franchisee or distributor to find out if your program is registered on this moment in the company "1C" or not. And if the user loses the registration form, the presence of registration in the company "1C" will easily allow you to identify the lost part of the form and confirm the license of your software product.
Security keys for the 1C platform
Hardware key for protection against unauthorized access. All 1C programs should work with the key, except for the basic and training versions. Distinctive features: a special device designed to run 1C programs, which is physically connected to the USB or LPT port of your computer, or if you are working in the network version, is located on one of the computers in your network, which is a server.
Keys "1C" differ in color:
"1C:Enterprise 8" local version - purple USB key
"1C:Enterprise 8" network version - red USB key
"1C:Enterprise 7.7" local version - white LPT key or purple USB
"1C:Enterprise 7.7" network version - red LPT key or red USB
Most of the licensed economic products "1C" comes with a key to protect against unauthorized access. The only exceptions are the basic versions of the programs "1C:Enterprise 7.7", "1C:Enterprise 8", some accounting products "1C" of earlier versions, which work without a security key and are simply "linked" to a computer. Some "1C" configurations may have an additional key.
Program registration number
Identification number of your software package. All installed and running 1C programs must have a registration number.
Features:
The registration number contains 7 digits and is indicated on the box, CDs, registration form, books and documentation. For all the above components of one set, the registration number must be the same.
Actual signs of licensing
To determine the actual signs of licensing, you need to check all the 1C programs installed on your computer. It is clear that this procedure can be carried out as efficiently as possible only by professionals specializing in the implementation of 1C software. For example, qualified franchisees or regional distributors of 1C can provide such services.
However, if you have enough experience with computer technology, such a check can be carried out on your own organization. We bring to your attention an express method used by experts to identify signs of violations of the procedure for the licensed use of 1C software products.
Instructions for determining the licensing of the program "1C"
Step one
Search for all "1C" programs on your computer.
It often happens that several software products are installed on the user's computer. At the same time, you may not even know about the existence of all of them, working in only one proven program, and meanwhile, your computer may store several more unlicensed versions on its hard drives. How to know about it?
Take advantage standard means Windows to search for files. To do this, in the "Start" menu, select "Find" "Files and Folders", then enter "1cv *.exe" in the search box. If the search returns no results, you can move on to the next computer. If the "1C" program files are present on the hard drives of any computer being checked, the search results window may look something like this:
step two
Checking the functionality of detected programs
It is necessary to sequentially try to run each of the detected files. To do this, double-click on the corresponding file in the search results window.
If there are too many files and they are written in directories with the characteristic names "patch" or "crack", there is cause for concern. Files from the "patch" or "crack" directories should not be touched before consulting with specialists, because these files can be modified or infected.
So, the operability of a particular program file is evidenced by the appearance of configuration selection windows.
Windows may look different:
If such windows did not appear on the screen, the program simply will not start working or it will give an error message, after which it will be automatically closed. For example, the message might be:
As a result, if the program does not start when you double-click on the corresponding file, this indicates that this file is most likely not used for work and should be removed with the help of a specialist.
If the 1C program has started, go to the next step.
Step Three
Checking the actual installed program.
Now let's determine which program is actually installed on your computer.
How to do it? We start the program "1C". When launched, the name of the program itself, the installed configuration and its version are written on the computer screen.
If you have already opened the 1C program and did not have time to see the name of the product when you turned it on, go to the "Help" section in the "Main Menu" of the program, find the "about the program" tab in it and read! It contains complete information about the installed platform, its version, as well as information about installed configurations and their releases. For example:
"1C: enterprise 8.2 (8.2.11.236). Configuration "Accounting for Moldova", edition 1.1 (1.1.25.1)"
Now compare the information you see on the "About" tab with the information on your registration form. The name of the program and the configuration must match. Otherwise, this indicates a possible unlicensedness of the software product you have installed. The same operation must be performed with all 1C software products that are available on your computer.
Step Four
Checking programs "1C" for the presence of a key.
Knowing the version of the program, it is not difficult to determine whether such a technical means of protection as a hardware protection key is provided for it. Recall! Only basic or training versions of 1C:Enterprise products work without a dongle. Downloading all other licensed programs "1C" is impossible without a key! The instructions for installing the program will confirm this for you.
Additionally, you need to make sure that all programs do not have a damaged protection system - the so-called " technical means protection" provided by the copyright holder. The fact is that in accordance with latest changes in law, "cracking" such protections (even if the program is purchased) is equated with copyright infringement.
If you have determined that the key is included in the distribution package of the program, you need to check whether you actually have it. Where to look for it?
- If you have a local version of the 1C program installed ...
If you work in "1C:Enterprise 7.7" or "1C:Enterprise 8" locally (that is, the single-user program is installed only on your computer), the security key must be inserted into the LPT or USB port of your computer. If the key is physically detected, connected, the program starts with it, and everything works, it is likely that your program is licensed. However, there is one more "but". Even if you found the key in stock and everything already speaks of the licensedness of your 1C program, all the same, for complete certainty, you need to carry out one more small check.
In the practice of using unlicensed versions of "1C", there are cases when the key was installed from one program "1C: Enterprise", say, "1C: Accounting 7.7" while the user worked in "1C: Trade and Warehouse 7.7", which was hacked . And the user did not know anything about the fact that the key in his case is only "To avert eyes."
Check license in this case is also very simple: close your program, disconnect the protection key from the computer and start the program again. If it starts, then the suspicions turned out to be correct, it works without a key, therefore, it is unlicensed.
- If you have a network version of the 1C program installed ...
If the network version "1C:Enterprise 7.7" or "1C:Enterprise 8" is installed in your organization, the key to your application must be located on the network or on the server.
If you have access to the server, check if the key is installed there and if this key belongs to your program. There is a key, so everything is in order.
There is no key. In the case of the network version, this is the first "call" about the unlicensedness of your program. You will be finally convinced of this by checking the operation of the key "locally". You just close your work program"1C" and exit the "network". For such a check, it is necessary to break all network connections, and if this is not possible, then simply physically disconnect the network cable from the computer.
Next, try to run the found files again. If, after disconnecting the computer from the network, the program stops starting, it means that the protection system is functioning properly and you can proceed to testing other files.
If disconnecting the computer from the network did not affect the performance of the program in any way, and it continues to run, we dare to upset you with an unlicensed copy.
Step five
Checking the computer for a dongle emulator
The last important factor in the course of auditing the licensedness of 1C programs is the detection of the key emulator. It may seem to you that this step repeats the previous ones a bit. However, we consider it necessary to focus your attention on emulators once again, since it is the use of emulators that is primarily looked at by representatives of inspection bodies. It is necessary to inspect the system unit of a computer disconnected from the network and determine whether a hardware protection key is connected to it. If the key is not found and your program starts without it, most likely you have installed the so-called key emulator - a cracker program written specifically for cracking 1C software. Most often, such crackers are programs whose names contain the word "Sable".
How to find them? Perhaps - by looking at the list of all programs installed on the hard drive of the computer with the "1C" program. And the easiest way, again, is to run the program locally without a key and a network connection. If the program cannot be started after the dongle is disconnected, the protection system functions properly and you can proceed to testing other detected files.
If the hardware key is not connected to the computer or it is missing at all, and the program starts up, it is quite possible that the protection system of the program has been hacked and it is used in violation of the license terms.
All program files (with the exception of educational and basic versions) with a damaged protection system must be removed from the computer.
Upon completion of the verification of 1C programs on one computer, we recommend that you perform the verification procedure for all computers on the network. This procedure will allow you to check the licensedness of the 1C platform you have installed.
Attention! The presence of a key emulator is a reason for litigation. Therefore, if emulators are found, we recommend removing them with the help of a specialist.
P.S.
Updates to programs manufactured by 1C, as well as the programs themselves, are objects of the exclusive right of 1C and are distributed according to the rules established by 1C as the copyright holder in accordance with Art. 301 of the Civil Code of the Republic of Moldova.
According to the rules described in the registration form for your software product, information, technology and service support is provided only by subscription (contract) to Information Technology Support (ITS).
The right to use software updates and information resources ITS is provided only to those users who have registered the program with 1C and subscribed (contract) to ITS through partners of 1C.
Firm "1C" allows to issue subscriptions (contracts) for ITS only to its official partners who have the appropriate license / sublicense agreement.
The user can check the availability of a subscription on the website (http://www.1c.ru/its).
Unauthorized distribution and use of updates and information resources is considered as a violation of copyright and is prosecuted under article 96.1 of the Code of the Republic of Moldova on administrative offenses and Art. 185.1 of the Criminal Code of the Republic of Moldova.
More information about the terms of support for 1C software products can be found at the link
(http://www.1c.ru/rus/support/support.htm)
informer- an element installed on a third-party site (by including a small HTML code in the page) and automatically displaying the latest releases of 1C configurations.
Examples:
Below is the informer code. Copy and paste it on the site.
Description of parameters:
| Options | Required | Description |
|---|---|---|
| last= <Число> | Not | The number of elements in the table. |
| bg =<Цвет> | Not | Background color, HEX. 0 - transparent. |
| distr_code= <Коды Конфигурации> | Not | Configuration codes, separated by commas, information about which to display. If this parameter is specified, the latest available version of the configuration is always displayed. |
| callback=
|
Not | The URL that will be set to the "Order" button. Parameter is added to the link "code=" to handle user selection. |
ITS check:
Below is the code of the ITS check block. Copy and paste it on the site.
For the ranges known to me reg. numbers are also determined by the configurations allowed for use.
For example, try specifying these numbers:
800262001
800119001
801054001