Job Description.
1. Management of machines and mechanisms used in the performance of construction, installation and repair and construction work.
2. Maintenance and preventive maintenance of machines and mechanisms listed below.
Must know:
Arrangement of machines (mechanisms), rules and instructions for their operation, maintenance and preventive maintenance;
- rules of the road when working with cars on a motor vehicle;
- ways of performing work with the help of appropriate machines;
- technical requirements to the quality of work performed, materials and elements of structures;
- consumption rates of fuels and lubricants and electricity;
- Plumbing in the scope provided for a construction fitter, but one level below the level of a machinist.
Machinist 3rd category
1. Mobile concrete mixers with batch volume up to 425 liters.
2. Construction cargo hoists (mast, rack, mine).
3. Mortar pumps.
4. Mobile mortar mixers with batch volume up to 325 l.
5. Electric winches.
6. Electric welding mobile units with an internal combustion engine with a power of up to 37 kW (50 hp).
Machinist 4th category
1. Aerial platforms and auto-hydraulic lifts with a lifting height of up to 15 m.
2. Autocompressors with a capacity of up to 3 m3/min.
3. High pressure airless sprayers.
4. Bar installations on tractors with engines up to 43 kW (60 hp).
5. Concrete pumping plants with a capacity of up to 20 m3/h.
6. Mobile concrete mixers with a batch volume of more than 425 to 1200 liters.
7. Mobile compressors with a capacity of up to 10 m3/min.
8. Truck cranes with a lifting capacity of up to 6.3 tons.
9. Ice cutting machines.
10. Painting stations are mobile.
11. Machines for insulating gas and oil pipelines (in stationary conditions).
12. Construction hoists (cargo-passenger).
13. Mobile mortar mixers with a mixing volume of more than 325 to 750 liters.
14. Mobile pipe bending machines for bending pipes with a diameter of up to 1200 mm.
15. Mobile plastering stations.
16. Electric welding mobile units with an internal combustion engine with a power of over 37 kW (50 hp) up to 73 kW (100 hp).
17. Mobile power plants with engines up to 37 kW (50 hp).
Machinist 5th category
1. Truck-mounted concrete pumps with a capacity of up to 40 m3/h.
2. Aerial platforms and auto-hydraulic lifts with a lifting height of over 15 to 25 m.
3. Autocompressors with a capacity of over 3 m3/min.
4. Auto-drills.
5. Bar installations on tractors with engine power over 43 kW (60 hp) up to 73 kW (100 hp).
6. Concrete pumping plants with a capacity of over 20 m3/h.
7. Mobile concrete mixers with a batch capacity of more than 1200 to 2400 liters.
8. Vacuum installations.
9. Self-propelled hydraulic seeders.
10. Drainage machines.
11. Compressors for supplying air to divers.
12. Mobile compressors with a capacity of over 10 to 50 m3/min.
13. Automobile cranes with a lifting capacity of more than 6.3 to 10 tons.
14. Machines for insulating gas and oil pipelines with a diameter of up to 800 mm (in highway conditions).
15. Mechanized tensioning devices for the manufacture of stress-reinforced structures.
16. Mechanized equipment for lifting mobile (sliding) formwork.
17. Mobile pipe bending machines for bending pipes with a diameter of more than 1200 mm.
18. Pipe cleaning machines with an engine power up to 73 kW (100 hp).
19. Pipelayers with engines up to 73 kW (100 hp).
20. Compacting and planning-compacting machines.
21. Mobile automated continuous cooking plants concrete mixtures with a productivity up to 60 m3/h.
22. Electric welding mobile units with an internal combustion engine with a power of over 73 kW (100 hp) up to 110 kW (150 hp).
23. Mobile power plants with an engine power of over 37 kW (50 hp) up to 110 kW (150 hp).
Machinist 6th category
1. Truck-mounted concrete pumps with a capacity of over 40 to 60 m3/h.
2. Aerial platforms and auto-hydraulic lifts with a lifting height of over 25 to 35 m.
3. Bar installations on tractors with an engine power over 73 kW (100 hp).
4. Earthmoving and milling self-propelled machines.
5. Mobile compressors with a capacity of over 50 to 70 m3/min.
6. Contact-welding mobile installations for welding main gas and oil pipelines.
7. Truck cranes with a lifting capacity of over 10 to 20 tons.
8. Machines for insulating gas and oil pipelines with a diameter of more than 800 mm to 1000 mm (in highway conditions).
9. Chimney cleaners with engines over 73 kW (100 hp).
10. Pipelayers with engine power over 73 kW (100 hp) up to 100 kW (140 hp).
11. Mobile automated continuous installations for the preparation of concrete mixtures with a capacity of more than 60 to 80 m3 / h.
12. Installations for punching and horizontal drilling of soil when laying pipelines with a drilling diameter of up to 500 mm.
13. Electric welding mobile units with internal combustion engines with a power of over 110 kW (150 hp).
14. Mobile power plants with engines with a power of over 110 kW (150 hp) up to 175 kW (240 hp).
Machinist 7th category
1. Truck-mounted concrete pumps with a capacity of over 60 to 180 m3/h.
2. Aerial platforms and auto-hydraulic lifts with a lifting height of over 35 m.
3. Mobile compressors with a capacity of over 70 m3/min.
4. Truck cranes with a lifting capacity of over 20 to 40 tons.
5. Machines for insulating gas and oil pipelines with a diameter of more than 1000 to 1200 mm (in highway conditions).
6. Planners (type UDS-100, UDS-114) on the chassis of a car for digging trenches when constructing structures using the "wall in the ground" methods with a depth of 20 to 40 m.
7. Mobile automated continuous installations for the preparation of concrete mixtures with a capacity of over 120 m3/h.
8. Installations for punching and horizontal drilling of soil when laying pipelines with a drilling diameter of more than 500 mm to 1000 mm.
9. Pipelayers with engine power over 100 kW (140 hp) up to 145 kW (200 hp).
10. Mobile power plants with an engine power of over 175 kW (240 hp).
Average required professional education.
Machinist 8th category
1. Truck-mounted concrete pumps with a capacity of over 180 m3/h.
2. Truck cranes with a lifting capacity of over 40 to 60 tons.
3. Machines for insulating gas and oil pipelines with a diameter of more than 1200 mm.
4. Planners (type UDS-110, UDS-114) on the chassis of a car for digging trenches when constructing structures using the "wall in the ground" methods with a depth of over 40 m.
5. Pipelayers with engine power over 145 kW (200 HP) up to 220 kW (300 HP).
6. Mobile automated continuous installations for the preparation of concrete mixtures with a capacity of over 120 m3/h.
7. Installations for punching and horizontal drilling of soil when laying pipelines with a drilling diameter of more than 1000 mm.
8. Mobile power plants included in the complex of machines "Sever".
Requires secondary vocational education.
Note.
Truck crane operators operating cranes with tower-jib equipment (ABKS type) are charged one category higher with the same crane capacity.
profession descriptionProfession Aerial platform and hydraulic lift operator In Ekaterinburg. Where can I learn to be an aerial platform and aerial platform operator in Yekaterinburg. In Yekaterinburg, the profession of an aerial platform and aerial platform operator can be obtained at colleges and technical schools in Yekaterinburg, as well as at training centers and centers vocational training.
Courses for aerial platform and aerial platform operator Yekaterinburg, training for an aerial platform operator in Yekaterinburg
Professional standard Aerial platform and hydraulic lift operator reg number under development
Description of the profession
Training Aerial platform and hydraulic lift operator Ekaterinburg, courses Aerial platform and hydraulic lift operator in Yekaterinburg
I II Excerpts from ETKS issue 3
Aerial platform and hydraulic lift operator
Characteristics of works. Management of machines and mechanisms used in the performance of construction, installation and repair and construction works. Maintenance and preventive maintenance of machines and mechanisms referred to in § § 100 - 105.
Must know: arrangement of machines (mechanisms), rules and instructions for their operation, maintenance and preventive maintenance; rules of the road when working with cars on a motor vehicle; methods of performing work with the help of appropriate machines; technical requirements for the quality of work performed, materials and elements of structures; consumption rates of fuels and lubricants and electricity; plumbing in the amount provided for a construction locksmith, but one level below the level of a machinist.
§ 100. Machinist of the 3rd category
Mobile concrete mixers with batch volume up to 425 l.
Elevators construction cargo (mast, rack-mount, mine).
Mobile mortar mixers with batch volume up to 325 l.
Electric winches.
Electric welding mobile units with an internal combustion engine with a power of up to 37 kW (50 hp).
§ 101. Machinist of the 4th category
Aerial platforms and auto-hydraulic lifts with a lifting height of up to 15 m.
Autocompressors with a productivity up to 3 m3/min.
Concrete pumping plants with capacity up to 20 m3/h.
Mobile concrete mixers with a batch capacity of more than 425 to 1200 liters.
Mobile compressors with a productivity up to 10 m3/min.
Truck cranes with lifting capacity up to 6.3 tons.
Ice cutting machines.
Mobile power stations with engines up to 37 kW (50 hp).
§ 102. Machinist of the 5th category
Truck-mounted concrete pumps with capacity up to 40 m3/h.
Aerial platforms and auto-hydraulic lifts with a lifting height of over 15 to 25 m.
Autocompressors with a productivity over 3 m3/min.
Concrete pumping plants with a capacity of over 20 m3/h.
Mobile compressors with a capacity of over 10 to 50 m3/min.
Truck cranes with a lifting capacity of more than 6.3 to 10 tons.
Electric welding mobile units with an internal combustion engine with a power of over 73 kW (100 hp) up to 110 kW (150 hp).
Mobile power plants with an engine power of over 37 kW (50 hp) up to 110 kW (150 hp).
§ 103. Machinist of the 6th category
Truck-mounted concrete pumps with a capacity of over 40 to 60 m3/h.
Aerial platforms and auto-hydraulic lifts with a lifting height of over 25 to 35 m.
Truck cranes with a lifting capacity of more than 10 to 20 tons.
Mobile power plants with engines with a power of over 110 kW (150 hp) up to 175 kW (240 hp).
§ 104. Machinist of the 7th category
Truck-mounted concrete pumps with a capacity of over 60 to 180 m3/h.
Aerial platforms and auto-hydraulic lifts with a lifting height of over 35 m.
Mobile compressors with a capacity of over 70 m3/min.
Truck cranes with a lifting capacity of over 20 to 40 tons.
Requires secondary vocational education.
§ 105. Machinist of the 8th category
Truck-mounted concrete pumps with a capacity of over 180 m3/h.
Truck cranes with a lifting capacity of over 40 to 60 tons.
Requires secondary vocational education.
Content of labor:
manages car lifts and aerial platforms installed on the chassis of the car, ensures stability, lifts the working platform, lowers and lays it in a transportable position, repairs and installs power and communication lines, the trolleybus contact network; cleans and paints buildings and structures, performs other work at height; performs preventive maintenance.
Must know:
ways of performing work at height, the procedure for maintenance of car lifts and towers, safety regulations, traffic rules, plumbing.
Professionally important qualities:
accurate eye gauge;
attentiveness;
accuracy;
stability of the vestibular apparatus;
physical health;
emotional stability;
good reaction.
Qualification requirements:
educational institutions of primary vocational education, course preparation.
Medical contraindications:
poor eyesight;
Fear of heights;
violation of the functions of the musculoskeletal and vestibular apparatus;
cardiovascular diseases;
nervous and mental diseases.
Retraining, advanced training of aerial platform and aerial platform operator with assignment qualification category.
Group lessons or individual consultations. Training is conducted both on the basis of an educational institution and on the basis of a customer organization in any region of Belarus.
Workers with a category in this profession (3-7 category) can undergo advanced training.
Documents are issued upon completion of training. state sample: certificate of assignment of a qualification category by profession.
ETCS
ENGINEER (GENERAL CONSTRUCTION MACHINES)
Characteristics of works. Management of machines and mechanisms of various types and purposes in the performance of construction, installation and repair and construction works. Refueling vehicles with fuels and lubricants. Regulation of the working mechanisms of machines for a given mode of operation. Maintenance machines and mechanisms. Identification and elimination of malfunctions in their work. Preventive maintenance and participation in other types of repair of serviced equipment.
Must know: device and specifications serviced machines and mechanisms; rules and instructions for their operation, maintenance and current repair; rules of the road when working with cars on a motor vehicle; installed alarm; rules for the production of works; consumption rates of fuels and lubricants and electricity; schemes and frequency of lubrication of machine and mechanism units; technical requirements for the quality of work performed; plumbing in the amount provided for a construction locksmith, charged per category below the driver.
When driving cars:
3rd category
1. Means of small-scale mechanization: mobile concrete mixers with a batch volume of up to 425 l, mast, rack and shaft lifts, mortar pumps, mobile mortar mixers with a batch volume of up to 325 l, electric winches.
2. Electric welding mobile units with an internal combustion engine with a power of up to 37 kW (up to 50 hp).
4th category
1. Aerial platforms and auto-hydraulic lifts with a lifting height of up to 15 m.
2. Autocompressors with a capacity of up to 3 cubic meters / min.
3. High pressure airless sprayers.
4. Mobile compressors with a capacity of up to 10 cubic meters / min.
5. Truck cranes with lifting capacity up to 6.3 tons (exclusively).
6. Machines for the isolation of gas and oil pipelines in stationary conditions.
7. Means of small-scale mechanization: concrete pumping plants with a capacity of up to 20 cubic meters per hour, mobile concrete mixers with a batch volume of more than 425 to 1200 liters, mobile painting and plastering stations, cargo-passenger lifts, mobile mortar mixers with a batch volume of more than 325 to 750 liters.
8. Mobile pipe bending machines for bending pipes with a diameter of up to 1200 mm.
9. High and low pressure installations - bar installations on tractors up to 43 kW (up to 60 hp).
10. Electric welding mobile units with an internal combustion engine with a power of 37 to 73 kW (50 to 100 hp).
11. Mobile power stations with engines up to 37 kW (up to 50 hp).
5th category
1. Truck-mounted concrete pumps with a capacity of up to 40 cubic meters per hour.
2. Aerial platforms and auto-hydraulic lifts with a lifting height of over 15 to 25 m.
3. Asphalt distributors.
4. Autocompressors with a capacity of more than 3 cubic meters / min.
5. Drilling and drilling-crane self-propelled machines with a drilling depth of up to 6 m; dredgers.
6. Self-propelled hydraulic seeders.
7. Earthmoving and milling machines - drainage machines.
8. Compressors for supplying air to divers.
9. Mobile compressors with a capacity of more than 10 to 50 cubic meters / min.
11. Truck cranes with lifting capacity from 6.3 to 10 tons (exclusively).
12. Machines for isolation of oil and gas pipelines with a diameter of up to 800 mm (exclusively).
13. Mechanized tensioning devices for the manufacture of stress-reinforced structures.
14. Mechanized equipment for lifting mobile (sliding) formwork.
15. Means of small-scale mechanization: concrete pumping plants with a capacity of more than 20 cubic meters / h, mobile concrete mixers with a batch volume of more than 1200 to 2400 liters.
16. Mobile pipe bending machines for bending pipes with a diameter of more than 1200 mm.
17. Pipe cleaning machines with an engine power up to 73 kW (up to 100 hp).
18. Pipelayers with engines up to 73 kW (up to 100 hp).
19. Compacting and planning-compacting machines.
20. High and low pressure installations: bar installations on tractors with a power of over 43 to 73 kW (over 60 to 100 hp), vacuum installations.
21. Mobile automated continuous installations for the preparation of concrete mixtures with a capacity of up to 60 cubic meters per hour.
22. Electric welding mobile units with an internal combustion engine with a power of over 73 to 110 kW (over 100 to 150 hp).
23. Mobile power plants with an engine power of over 37 to 110 kW (over 50 to 150 hp).
6th category
1. Concrete pumps with a capacity of over 40 to 60 cubic meters / h.
2. Aerial platforms and auto-hydraulic lifts with a lifting height of over 25 to 35 m.
3. Bitumen-smelting mobile units.
4. Drilling and drilling-crane self-propelled machines with a drilling depth of more than 6 m.
5. Earth-moving and milling self-propelled machines.
6. Mobile compressors with a capacity of more than 50 to 70 cubic meters / min.
7. Contact-welding mobile installations for welding main gas and oil pipelines.
9. Truck cranes with lifting capacity from 10 to 20 tons.
10. Machines for isolation of gas and oil pipelines with a diameter of 800 to 1000 mm (exclusively) in the field conditions.
11. Pipe cleaning machines with an engine power of over 73 kW (over 100 hp).
12. Pipelayers with engine power over 73 to 100 kW (over 100 to 140 hp).
13. High and low pressure installations (bar installations on tractors with a power of over 73 kW (over 100 hp).
14. Mobile automated continuous installations for the preparation of concrete mixtures with a capacity of up to 80 cubic meters / h.
15. Installations for punching and horizontal drilling of soil when laying pipelines with a drilling diameter of up to 500 mm.
16. Electric welding mobile units with an internal combustion engine with a power of over 110 kW (over 150 hp).
17 Mobile power plants with an engine power of over 110 to 175 kW (over 150 to 240 hp).
7th rank
1. Truck-mounted concrete pumps with a capacity of over 60 to 180 cubic meters per hour.
2. Aerial platforms and auto-hydraulic lifts with a lifting height of over 35 m.
3. Drilling and drilling-crane self-propelled machines with an engine power of 100 - 180 hp. with drilling diameter over 400 to 1200 mm.
4. Mobile compressors with a capacity of over 70 cubic meters / min.
6. Truck cranes with a lifting capacity of over 20 to 40 tons.
7. Machines for isolation of gas and oil products pipelines with a diameter of 1000 to 1200 mm (exclusively) in the field conditions.
8. Pipelayers with engine power over 100 to 145 kW (over 140 to 200 hp).
9. Mobile automated continuous installations for the preparation of concrete and soil mixtures in near-road quarries with a capacity of 80 to 120 cubic meters per hour (exclusively).
10. Installations for punching and horizontal drilling of soil when laying pipelines with a drilling diameter of 500 to 1000 mm.
11. Mobile power plants with an engine power of over 175 kW (over 240 hp).
8th rank
1. Concrete pumps with a capacity of over 180 cubic meters / h.
2. Truck cranes with a lifting capacity of over 40 to 60 tons.
3. Machines for isolation of gas and oil products pipelines with a diameter of 1200 mm or more in the field conditions.
4. Pipelayers with engine power over 145 to 220 kW (over 200 to 300 hp) (exclusively).
5. Mobile automated continuous installations for the preparation of concrete mixtures with a capacity of 120 cubic meters per hour or more.
6. Installations for punching and horizontal drilling of soil when laying pipelines with a drilling diameter of more than 1000 mm.
Secondary special (professional) education is required for assignment of 7th - 8th categories.
Note. Drivers of automobile cranes with tower-boom equipment of the ABKS type are charged one category higher with the same lifting capacity of the crane.
VOCATIONAL TRAINING IN WORKING PROFESSION
"AUTOTOCKER ENGINEER AND HYDRAULIC LIFT »
Get a job as a worker right now
- and get a certificate of qualification!
About the program vocational training
Profession code
: 13507
Qualification ranks:
4-7
The purpose of training:
to give students the knowledge, skills and abilities in the formation of competence to perform labor activity aerial platform and hydraulic lift operator.
Training period:
2 weeks.
Program scope:
80 hours, of which:
- theoretical training - 70 hours;
- on-the-job training - 10 hours.
Language of instruction:
Russian
Age: from 17 years old
Restrictions on the level of education:
missing
Place of study:
you can get trained and receive an official document of qualification regardless of where you live.
Form of study:
part-time (part-time) using e-learning and distance educational technologies.
| Program author: |  |
| Program partner: |
| + | = | |||
|
The program consists Complete the courses (3) in the suggested order. |
Complete practical qualifying work. |
Worker's Profession Certificate Get a document on qualifications and start working. |
||
| Go to the e-learning portal | ||||
| Training period | Professional training programs | Volume (hour.) |
Form of study | |
| correspondence * | part-time ** | |||
| EDUCATIONAL PROGRAMS PROFESSIONAL TRAINING | ||||
| 2 weeks | Aerial platform and hydraulic lift operator (previously did not have a working profession)*** |
80 | 5000 | 7000 |
| EDUCATIONAL PROGRAMS RETRAINING | ||||
| 2 weeks | Aerial platform and hydraulic lift operator (having any working profession) *** |
80 | 4500 | 6500 |
| EDUCATIONAL PROGRAMS OF PROFESSIONAL DEVELOPMENT |
||||
| 2 weeks | Aerial platform and hydraulic lift operator (increasing the qualification category to 5, 6, 7) |
80 | ||
| PROGRAMS ADDITIONAL EDUCATION | ||||
| aerial-profi | Telescopic arm aerial platform operator | 40 | ||
| boom-profi | Articulated boom aerial platform operator | 40 | ||
*** PAY YOUR ATTENTION! If you do not have any profession of a worker, do not have a document on vocational education or vocational training, then you need to complete training under the program of vocational training. If you have previously acquired a profession or received a vocational education, then you need to complete training under a vocational program retraining. Affects the cost of education!
*
Extramural studies- for citizens of any subject of the Russian Federation (training using e-learning and distance learning technologies).
**
Part-time education- for citizens residing in the territory of Yaroslavl and the Yaroslavl region.
Professional training program
- training of persons who previously did not have the profession of a worker.
Retraining program- training of persons who already have the profession of a worker (tractor driver, loader driver, bulldozer driver, all-terrain vehicle driver, motor grader driver, etc.).
Professional development program- training of persons who already have the profession of a worker, in order to consistently improve their professional knowledge, skills and abilities in their current profession.
QUALIFICATION RANKS
Qualification characteristics in accordance with: Unified Tariff and Qualification Reference Book of Works and Professions of Workers (ETKS). Issue No. 3 Approved by the Order of the Ministry of Health and Social Development of the Russian Federation of 04/06/2007 N 243 (as amended by: Orders of the Ministry of Health and Social Development of the Russian Federation of 11/28/2008 N 679, of 04/30/2009 N 233)
4th category
up to 15 m
;
5th categoryover 15 to 25 m
;
6th category- aerial platforms and auto-hydraulic lifts with lifting height over 25 to 35 m
;
7th category- aerial platforms and auto-hydraulic lifts with lifting height over 35 m
.
Characteristics of works.
Management of machines and mechanisms used in the performance of construction, installation and repair and construction works. Maintenance and preventive maintenance of machines and mechanisms.
Must know: arrangement of machines (mechanisms), rules and instructions for their operation, maintenance and preventive maintenance; rules of the road when working with cars on a motor vehicle; methods of performing work with the help of appropriate machines; technical requirements for the quality of work performed, materials and elements of structures; consumption rates of fuels and lubricants and electricity.
DOCUMENT OF QUALIFICATION
After graduation educational program the student receives a qualification document - a certificate of the worker's profession.
The certificate of the profession of a worker confirms the assignment of a rank based on the results of vocational training. The qualification indicated in the qualification document gives its holder the right to practice certain professional activity or perform specific job functions
(Clause 11, Article 60 of the Law on Education in the Russian Federation of December 29, 2012 No. 273-FZ)
|
MINISTRY
|
Unified tariff-qualification guide.(Fragments. The full version is located at the bottom of the page - for download). Driver Characteristics of works. Management of machines and mechanisms used in the performance of construction, installation and repair and construction works. Maintenance and preventive maintenance of machines and mechanisms referred to in §§ 100 - 105. Must know: arrangement of machines (mechanisms), rules and instructions for their operation, maintenance and preventive maintenance; rules of the road when working with cars on a motor vehicle; methods of performing work with the help of appropriate machines; technical requirements for the quality of work performed, materials and elements of structures; consumption rates of fuels and lubricants and electricity; plumbing in the amount provided for a construction locksmith, but one level below the level of a machinist. § 100. Machinist 3rd category Mobile concrete mixers with batch volume up to 425 l. Elevators construction cargo (mast, rack-mount, mine). Mortar pumps. Mobile mortar mixers with batch volume up to 325 l. Electric winches. Electric welding mobile units with an internal combustion engine with a power of up to 37 kW (50 hp). § 101. Machinist 4th category Aerial platforms and auto-hydraulic lifts with a lifting height of up to 15 m. Mobile power plants with an engine power up to 37 kW (50 hp). § 102. Driver 5th category Truck-mounted concrete pumps with capacity up to 40 m3/h. Aerial platforms and auto-hydraulic lifts with a lifting height of over 15 to 25 m. Autocompressors with a productivity over 3 m3/min. Yamoburs. Bar installations on tractors with an engine power over 43 kW (60 hp) up to 73 kW (100 hp). Concrete pumping plants with a capacity of over 20 m3/h. Mobile concrete mixers with a batch capacity of over 1200 to 2400 liters. Vacuum installations. Self-propelled hydraulic seeders. Drainage machines. Air compressors for divers. Mobile compressors with a capacity of over 10 to 50 m3/min. Automobile cranes with a lifting capacity of over 6.3 to 10 tons. Machines for insulating gas and oil pipelines with a diameter of up to 800 mm (in highway conditions). Mechanized tensioning devices for the manufacture of stress-reinforced structures. Mechanized equipment for lifting mobile (sliding) formwork. Mobile pipe bending machines for bending pipes with a diameter of more than 1200 mm. Pipe cleaning machines with engine power up to 73 kW (100hp). Pipelayers with engines up to 73 kW (100 hp). Sealing and planning-sealing machines. Mobile automated continuous installations for the preparation of concrete mixtures with a capacity of up to 60 m3/h. Electric welding mobile units with an internal combustion engine with a power of over 73 kW (100 hp) up to 110 kW (150 hp). Mobile power plants with an engine power of over 37 kW (50 hp) up to 110 kW (150 hp). § 103. Driver 6th category Truck-mounted concrete pumps with a capacity of over 40 to 60 m3/h. Aerial platforms and auto-hydraulic lifts with a lifting height of over 25 to 35 m. Bar installations on tractors with an engine power over 73 kW (100 hp). Earth-moving and milling self-propelled machines. Mobile compressors with a capacity of over 50 to 70 m3/min. Contact welding installations mobile for welding of the main gas-oil pipelines. Automobile cranes with a lifting capacity of over 10 to 20 tons. Machines for insulating gas and oil pipelines with a diameter of over 800 mm to 1000 mm (in highway conditions). Pipelayers with engine power over 73 kW (100 hp) up to 100 kW (140 hp). Mobile automated continuous installations for the preparation of concrete mixtures with a capacity of over 60 to 80 m3/h. Installations for punching and horizontal drilling of soil when laying pipelines with a drilling diameter of up to 500 mm. Electric welding mobile units with internal combustion engines with a power of over 110 kW (150 hp). Mobile power plants with engines with a power of over 110 kW (150 hp) up to 175 kW (240 hp). § 104. Driver 7th rank Truck-mounted concrete pumps with a capacity of over 60 to 180 m3/h. Aerial platforms and auto-hydraulic lifts with a lifting height of over 35 m. Mobile compressors with a capacity of over 70 m3/min. Truck cranes with a lifting capacity of over 20 to 40 tons. Machines for insulating gas and oil pipelines with a diameter of more than 1000 to 1200 mm (in highway conditions). Planners (type UDS-100, UDS-114) on the chassis of a car for digging trenches when constructing structures using the "wall in the ground" methods with a depth of 20 to 40 m. Installations for punching and horizontal drilling of soil when laying pipelines with a drilling diameter of more than 500 mm to 1000 mm. Pipelayers with engine power over 100 kW (140 hp) up to 145 kW (200 hp). Mobile power plants with an engine power of over 175 kW (240 hp). Requires secondary vocational education. § 105. Machinist 8th rank Truck-mounted concrete pumps with a capacity of over 180 m3/h. Truck cranes with a lifting capacity of over 40 to 60 tons. Machines for insulating gas and oil pipelines with a diameter of more than 1200 mm. Planners (type UDS-110, UDS-114) on the chassis of a car for digging trenches when constructing structures using the "wall in the ground" methods with a depth of over 40 m. Pipelayers with engine power over 145 kW (200 hp) up to 220 kW (300 hp). Mobile automated continuous installations for the preparation of concrete mixtures with a capacity of over 120 m3/h. Installations for punching and horizontal drilling of soil when laying pipelines with a drilling diameter of more than 1000 mm. Mobile power plants, included in the complex of machines "Sever". Requires secondary vocational education. Note. Truck crane operators operating cranes with tower-jib equipment (ABKS type) are charged one category higher with the same crane capacity. Bulldozer driver Characteristics of works. Performance of work by bulldozers with engines, the power of which is specified in §§ 106 - 110. Development, movement of soil and planning of areas when arranging cuts, embankments, reserves, cavaliers and banquets during the construction of automobile and railways, irrigation and navigable canals, dams, protective earth dams, pits for buildings and structures, power transmission line supports and contact networks and other similar structures. Carrying out emergency and restoration work on railway transport. Performing work under water with a bulldozer. Must know: device, principle of operation and technical characteristics of tractors and attachments; methods of installation and dismantling of attachments; causes of malfunctions and ways to eliminate them; rules for the development and movement of soils various categories at different depth of development; rules for layer-by-layer filling of embankments - rules for developing excavations, filling embankments and planning areas according to specified profiles and marks. § 106. Bulldozer driver
4th category
Bulldozers with engines up to 43 kW (60 hp). § 107. Bulldozer driver 5th category Bulldozers with engine power over 43 kW (60 hp) up to 73 kW (100 hp). § 108. Bulldozer driver 6th category Bulldozers with engine power over 73 kW (100 hp) up to 150 kW (200 hp). Requires secondary vocational education. § 109. Bulldozer driver 7th rank Bulldozers with engine power over 150 kW (200 hp) up to 280 kW (380 hp). Requires secondary vocational education. § 110. Bulldozer driver 8th rank Bulldozers with engines over 280 kW (380 hp). Requires secondary vocational education. Excavator driver Characteristics of works. Performance of work by single-bucket excavators with a bucket and bucket-wheel excavators, the capacity and productivity of which are specified in §§ 115 - 119. Excavation for the construction of excavations, embankments, reserves, cavaliers and banquets during construction highways, irrigation and navigable canals, dams, protective earth dams. Development of pits for buildings and structures, during the construction of supports for power lines and contact networks. Digging trenches for underground utilities, drainage ditches, upland and banquet ditches and other similar structures. Must know: device, principle of operation and technical characteristics of excavators; the principle of operation of mechanical, hydraulic and electrical equipment; rules for the installation and dismantling of excavator attachments; causes of malfunctions and ways to eliminate them; rules for the development of soils of various categories at different depths of the face; soil development rules in compliance with specified profiles and elevations. § 115. Excavator driver 4th category Single-bucket excavators with bucket capacity up to 0.15 m3. § 116. Excavator driver 5th category Single bucket excavators with a bucket capacity of over 0.15 m3 to 0.4 m3. § 117. Excavator driver 6th category Single-bucket excavators with bucket capacity over 0.4 m3 up to 1.25 m3. § 118. Excavator driver 7th rank Single bucket excavators with a bucket capacity of over 1.25 m3 to 4 m3. §119. Excavator driver 8th rank Single bucket excavators with a bucket capacity of over 4 m3 to 9 m3. Engineer of machines for the construction of foundations and coatings of roads and airfields Control of machines of various types and purposes specified in §§ 120 - 124, used in the construction and repair of the superstructure of highways and the construction of airfields. Maintenance of the machine, checking the health of its systems and components. Troubleshooting and troubleshooting of the machine. Participation in scheduled preventive maintenance. Refueling with fuels and lubricants. Must know: the purpose and arrangement of serviced machines, the rules and instructions for their operation; methods of work performance and technical requirements for their quality; fuel and lubricant consumption rates; grades and properties of oils and fuels, their technological characteristics, safe storage rules; Traffic Laws. § 120. Driver 4th category Graders trailed with a knife up to 3000 mm long (without extension). § 121. Machinist 5th category Autoconcrete breakers. Finishers. § 122. Driver 6th category Motor graders with engine power over 59 kW (80 HP) up to 100 kW (135 HP).
protective coating layers. Road cutters with engine power up to 120 kW (160 hp). Requires secondary vocational education. § 123. Driver 7th rank Motor graders with engine power over 100 kW (135 hp) up to 150 kW (200 hp).
§ 124. Driver 8th rank Motor graders with engine power over 150 kW (200 HP) up to 180 kW (240 HP).
|
