Beginning: 20000 per month
Experienced: 40000 per month
Professional: 56000 per month
Demand for the profession
Many companies and many enterprises require qualified Process Automation Engineers.
Where to study as an APCS engineer in Moscow
Who is the profession for?
The profession associated with technology and mechanisms does not tolerate a familiar attitude to work. Responsibility and accuracy of all actions are important here. Even meticulous work, at times, requires stress resistance. Responsibility and attentiveness of a specialist will help him to avoid mistakes in his work.
Career
Process control automation engineer has three categories. This is determined by the presence higher education and work experience. An experienced qualified specialist will always be in demand in the labor market.
Responsibilities
To improve the quality of products, to make the work of workers in production safe and highly productive, it is necessary to automate the process control systems. Before that, the engineer studies the spectrum necessary work and doing research. Makes plans for automation and mechanization production processes, lifting and transport, loading and unloading and warehouse operations. Receives sketches and technical projects, drawings for consideration. Participates in installation work, adjustment and commissioning of automation and mechanization facilities. Supervises their maintenance and ensures that the work meets the criteria of reliability and quality. The engineer describes the results of the work done in the report.
Rate the job: 1 2 3 4 5 6 7 8 9 10 Download engineer job descriptionon automated production control systems(.doc, 90KB)
I. General provisions
- Software Engineer automated systems production management belongs to the category of specialists.
- For the position:
- an engineer for automated production control systems is appointed a person who has a higher professional (engineering-economic or technical) education without presenting requirements for work experience or a secondary vocational (engineering-economic or technical) education and work experience as a technician of category I for at least 3 years or other positions filled by specialists with a secondary professional (engineering, economic or technical) education for at least 5 years.
- engineer for automated production control systems of category II - a person who has a higher professional (engineering-economic or technical) education and work experience as an engineer for automated production control systems or other engineering and technical positions occupied by specialists with a higher professional (engineering-economic or technical) education, at least 3 years;
- engineer for automated production control systems of the 1st category - a person who has a higher professional (engineering, economic or technical) education and work experience as an engineer for automated production control systems of the 2nd category for at least 3 years.
- Appointment to the position of engineer for automated production control systems and dismissal from it is carried out by order of the director of the enterprise on the proposal of the head of the department of automated production control systems.
- An engineer for automated production control systems should know:
- 4.1. Decrees, orders, orders, methodological and regulatory materials on the organization of automated production control systems.
- 4.2. Prospects for the development of the enterprise.
- 4.3. organization economic planning and operational control of production.
- 4.4. The structure of the enterprise, production and functional relations between its divisions.
- 4.5. Tasks and content of the automated control system.
- 4.6. The procedure for the development of projects for automated control systems and its subsystems, terms of reference, technical and working projects.
- 4.7. Economic and mathematical methods.
- 4.8. Fundamentals of the theory of economic cybernetics.
- 4.9. Means of computer technology, communications and communications.
- 4.10. The order of setting tasks, their algorithmization.
- 4.11. Methods of determination economic efficiency implementation of APCS.
- 4.12. Standards of the unified system of organizational and administrative documentation.
- 4.13. The order of development and registration technical documentation.
- 4.14. Fundamentals of economics, organization of production, labor and management.
- 4.15. Basics labor law.
- 4.16. Rules and norms of labor protection.
- The engineer for automated production control systems reports directly to the head of the department for automation and mechanization of production processes.
- During the absence of an engineer for automated production control systems (vacation, illness, etc.), his duties are performed by a person appointed in in due course. This person acquires the appropriate rights and is responsible for the proper performance of the duties assigned to him.
II. Job Responsibilities
Engineer for automated production control systems:
- Performs work on the design and implementation of automated production control systems (APCS) based on the use of a combination of economic and mathematical methods, modern computer technology, communications and communications, elements of the theory of economic cybernetics.
- It studies the system and methods of managing and regulating the activities of the enterprise, its production and functional divisions, determines the possibility of formalizing the elements of the current system and the feasibility of transferring the relevant processes to an automated mode.
- Carries out the preparation of the necessary data and participates in the preparation of the terms of reference for the design of the automated control system and its individual stages and subsystems, in the development of technical and working projects.
- Formulates the formulation of tasks, performs work on their algorithmization, identifies the possibilities of typing solutions for individual elements of the system, prepares proposals for the use of standard blocks in the design of automated control systems and participates in their creation.
- Studying developed design organizations and automated production control systems operating at other enterprises in order to use the best practices in the design and operation of automated control systems.
- Takes part in the work to improve the workflow at the enterprise, formulates requirements for the content and construction of technical and organizational and administrative documentation used in the automated production control system.
- Develops technological schemes processing information on the established tasks of the automated control system, taking into account the organizational and technical support for all subsystems.
- Prepares projects teaching materials, instructions and other technical documentation related to the creation and use of funds for the information use of the automated control system.
- Participates in debugging, trial operation and phased commissioning of the complex technical means ASUP.
- Carries out architectural supervision and periodic control of incoming and outgoing documentation.
- It studies the causes of failures and violations in the system, develops proposals for their elimination and prevention, for improving the quality and reliability of the automated control system.
- Provides methodological assistance to enterprise divisions in the preparation of data for automated control systems, on registration required documents and decoding information processed by computer technology.
III. Rights
An engineer for automated production control systems has the right to:
- Get acquainted with the draft decisions of the management of the enterprise relating to its activities.
- Submit proposals for the management to improve the work related to the duties provided for in this job description.
- Notify the immediate supervisor of all identified in the process of execution of their official duties shortcomings in production activities enterprises (his structural divisions) and make suggestions for their elimination.
- Request personally or on behalf of the immediate supervisor from the heads of enterprise departments and specialists information and documents necessary for the performance of his duties.
- Involve specialists from all (individual) structural divisions in solving the tasks assigned to him (if this is provided for by the regulations on structural divisions, if not, then with the permission of the management).
- Require the management of the enterprise to assist in the performance of his duties and rights.
IV. A responsibility
The Production Control Systems Engineer is responsible for:
- For improper performance or non-performance of their official duties under this job description, - within the limits determined by the current labor legislation Russian Federation.
- For offenses committed in the course of carrying out their activities - within the limits determined by the current administrative, criminal and civil legislation of the Russian Federation.
- For causing material damage— within the limits determined by the current labor and civil legislation of the Russian Federation.
1. An engineer for automated production control systems belongs to the category of specialists.
2. For the position:
An engineer for automated production control systems is appointed by a person who has a higher professional (engineering-economic or technical) education without presenting requirements for work experience or a secondary vocational (engineering-economic or technical) education and work experience as a technician of category I for at least 3 years or other positions filled by specialists with a secondary professional (engineering, economic or technical) education for at least 5 years.
Engineer for automated production control systems of category II - a person who has a higher professional (engineering-economic or technical) education and work experience as an engineer for automated production control systems or other engineering and technical positions occupied by specialists with a higher professional (engineering-economic or technical) education, at least 3 years;
Engineer for automated production control systems of category I - a person who has a higher professional (engineering, economic or technical) education and work experience as an engineer for automated production control systems of category II for at least 3 years.
3. Appointment to the position of an engineer for automated production control systems and dismissal from it is carried out by order of the director of the enterprise on the proposal of the head of the department of an automated production control system.
4. An engineer for automated production control systems must know:
4.1. Decrees, orders, orders, methodological and regulatory materials on the organization of automated production control systems.
4.2. Prospects for the development of the enterprise.
4.3. Organization of economic planning and operational regulation of production.
4.4. The structure of the enterprise, production and functional relations between its divisions.
4.5. Tasks and content of the automated control system.
4.6. The procedure for the development of projects for automated control systems and its subsystems, terms of reference, technical and working projects.
4.7. Economic and mathematical methods.
4.8. Fundamentals of the theory of economic cybernetics.
4.9. Means of computer technology, communications and communications.
4.10. The order of setting tasks, their algorithmization.
4.11. Methods for determining the economic efficiency of the introduction of automated control systems.
4.12. Standards of the unified system of organizational and administrative documentation.
4.13. The procedure for the development and execution of technical documentation.
4.14. Fundamentals of economics, organization of production, labor and management.
4.15. Fundamentals of labor legislation.
4.16. Rules and norms of labor protection.
5. An engineer for automated production control systems reports directly to the head of the department for automation and mechanization of production processes.
6. During the absence of an engineer for automated production control systems (vacation, illness, etc.), his duties are performed by a person appointed in the prescribed manner. This person acquires the appropriate rights and is responsible for the proper performance of the duties assigned to him.
II. Job Responsibilities
Engineer for automated production control systems:
1. Performs work on the design and implementation of automated production control systems (APCS) based on the use of a combination of economic and mathematical methods, modern computer technology, communications and communications, elements of the theory of economic cybernetics.
2. Examines the system and methods of managing and regulating the activities of the enterprise, its production and functional divisions, determines the possibility of formalizing the elements of the current system and the feasibility of transferring the relevant processes to an automated mode.
3. Carries out the preparation of the necessary data and participates in the preparation of the terms of reference for the design of the automated control system and its individual stages and subsystems, in the development of technical and working projects.
4. Formulates the formulation of tasks, performs work on their algorithmization, identifies the possibilities of typing solutions for individual elements of the system, prepares proposals for the use of standard blocks in the design of automated control systems and participates in their creation.
5. Studying the automated production control systems developed by design organizations and operating at other enterprises in order to use the best practices in the design and operation of automated control systems.
6. Takes part in the work to improve the workflow at the enterprise, formulates requirements for the content and construction of technical and organizational and administrative documentation used in the automated production control system.
7. Develops technological schemes for processing information on the established tasks of the automated control system, taking into account the organizational and technical support for all subsystems.
8. Prepares draft methodological materials, instructions and other technical documentation related to the creation and use of funds for the information use of the automated control system.
9. Participates in the work on debugging, trial operation and phased introduction of a complex of technical means of automated control systems.
11. Study the causes of failures and violations in the system, develop proposals for their elimination and prevention, to improve the quality and reliability of the automated control system.
12. Provides methodological assistance to the divisions of the enterprise in preparing data for the automated control system, in preparing the necessary documents and decoding information processed by computer technology.
III. Rights
An engineer for automated production control systems has the right to:
1. Get acquainted with the draft decisions of the management of the enterprise relating to its activities.
2. Submit proposals for the management to improve the work related to the duties provided for in this job description.
3. Report to the immediate supervisor about all the shortcomings in the production activities of the enterprise (its structural divisions) identified in the course of the performance of their duties and make proposals for their elimination.
4. Request personally or on behalf of the immediate supervisor from the heads of departments of the enterprise and specialists information and documents necessary for the performance of his duties.
5. To involve specialists from all (individual) structural divisions in solving the tasks assigned to him (if this is provided for by the regulations on structural divisions, if not, then with the permission of the management).
6. Require the management of the enterprise to assist in the performance of his duties and rights.
IV. A responsibility
The Production Control Systems Engineer is responsible for:
1. For improper performance or non-performance of their official duties provided for by this job description - to the extent determined by the current labor legislation of the Russian Federation.
2. For offenses committed in the course of carrying out their activities - within the limits determined by the current administrative, criminal and civil legislation of the Russian Federation.
3. For causing material damage - within the limits determined by the current labor and civil legislation of the Russian Federation.
I. General provisions
1.1. Engineer for automated computer systems
(information and computing) center (hereinafter - CC (EC) refers to
professional category.
1.2. For the position:
- an engineer for automated systems of the computer center (EC) is appointed a person,
having a higher professional (engineering-economic or technical)
education without presenting requirements for work experience or secondary
professional (engineering, economic or technical) education and
at least _______ years of experience as a technician of category I, or
other positions filled by specialists with an average professional
(engineering-economic or technical) education, at least _______
years;
- engineer for automated systems of the computer center (EC) II category -
automated systems of CC (EC) or other engineering and technical
positions filled by specialists with higher professional
(engineering-economic or technical) education, not less than ________
years;
- Engineer for automated systems of the Computing Center (IVC) of the 1st category -
a person with a higher professional (engineering, economic or
technical) education and work experience as an engineer
automated systems of the computer center (IVC) of category II for at least _______ years;
1.3. Appointment to the position of engineer for automated systems
VTs (IVTS) and exemption from it is carried out by order of the head of the VTs (IVTS)
on the proposal of ______________________________________________________________
(head of the production department of the VTs (IVTS), head
Department of Development and Implementation of the Computing Center (IVC), another structural subdivision
center)
1.4. An engineer for automated systems of a computer center (EC) should know:
- resolutions, orders, orders of higher organizations,
other regulatory, methodological and guidance materials for operation
information processing systems and their development;
- prospects for technical development and features of activities
production;
- work principles, specifications;
- design features of the implemented and used technical
means, materials and their properties;
- design methods, rules and operating conditions of systems
information processing;
- basic requirements for technical documentation,
materials, information and computing services;
- current standards, specifications, provisions and instructions
on the preparation and execution of technical documentation;
- methods for carrying out technical calculations and determining the economic
efficiency in the operation and development of systems;
- advanced domestic and overseas experience in scope
computer facilities;
- fundamentals of economics, organization of production, labor and management;
- fundamentals of the labor legislation of the Russian Federation;
- internal rules work schedule;
- rules and regulations of labor protection, safety measures,
industrial sanitation and fire protection;
- _________________________________________________________________.
1.5. Engineer for automated systems CC (EC) reports to
directly _____________________________________________________________
(Head of the Computer Center (IVC), Head of the Production Department
________________________________________________________________________.
VTs (IVTS), head of the development and implementation department of the VTs (IVTS); leader
another structural subdivision of the VC (IVC)
1.6. During the absence of an automated systems engineer
VTs (IVTS) (vacation, illness, business trip, etc.) performs its duties
duly appointed person. This person acquires
relevant rights and is responsible for the quality and
timely performance of the duties assigned to him.
1.7. ______________________________________________________________.
II. Job Responsibilities
Computer-aided systems engineer (EC):
2.1. Performs work on the development, implementation and operation of systems
automated and mechanized information processing.
2.2. Develops methodological and regulatory materials, technical
documentation, as well as proposals and activities to support
developed projects and programs.
2.3. Conducts technical and economic analysis, comprehensively substantiates
decisions made and implemented, seeks ways to reduce
cycle of work (services), contributes to the preparation of the process of their
implementation, providing the necessary technical data, materials and
equipment.
2.4. Participates in pre-project survey, development
projects and programs, in carrying out the necessary activities related to
pilot operation, testing of equipment and materials, in
consideration of various technical documentation and prepares
necessary reviews, reviews, conclusions.
2.5. Studying and analyzing necessary information, technical
data, indicators and results of work, summarizes and systematizes them,
holds necessary calculations using modern technical means.
2.6. Prepares work schedules, orders, applications, instructions,
explanatory notes, maps, diagrams and other technical documentation, and
also established reporting on approved forms and in established
terms.
2.7. Provides methodological and practical assistance in processing,
preparation and transmission of information, implementation of projects and programs, plans
and contracts.
2.8. Carries out examination of technical documentation, supervision and
monitoring the condition and operation of equipment, identifying reserves,
establishes the causes of system failures and failures of decisions and malfunctions in
operation of the equipment, takes measures to eliminate them and improve
efficiency of use.
2.9. Monitors compliance with established requirements
norms, rules and standards.
2.10. Organizes work to improve scientific and technical knowledge
employees, on-the-job training of personnel.
2.11. Promotes the development of creative initiative, rationalization,
inventions, the introduction of domestic and foreign achievements in
areas of operation and design of information processing systems,
the use of best practices that provide efficient work funds
computer technology.
2.12. _____________________________________________________________.
III. Rights
Computer-aided systems engineer (EC) has the right to:
3.1. Get acquainted with the draft decisions of the head of the Computing Center (IVC) and
heads of structural subdivisions of the center concerning its
activities.
3.2. Submit proposals for consideration by management
improvement of the work related to the duties stipulated
this instruction.
3.3. Within its competence, report _________________________
(Head of the Computing Center (IVTS),
head of the production department of the VC (IVC), head of the department
_________________________________________________________________________
development and implementation of VC (IVC); head of another structural
subdivisions of the VC (IVC)
about all identified in the course of the performance of their duties
shortcomings in the activities of the center (its structural divisions) and
make suggestions for their elimination.
3.4. Request in person or on behalf of the direct
head from the heads of departments of the center and specialists
information and documents necessary for the performance of their duties
responsibilities.
3.5. Engage specialists from all (individual) structural
units to solve the tasks assigned to it (if it is provided
regulations on structural divisions, if not - with permission
head of the VC (IVC).
3.6. Require the management of the center to provide assistance in
performance of their duties and rights.
3.7. ______________________________________________________________.
IV. A responsibility
Engineer for automated systems of the computer center (IVC) is responsible
a responsibility:
4.1. For improper performance or non-performance of their official
responsibilities under this job description
within the limits determined by the labor legislation of the Russian Federation.
4.2. For offenses committed in the course of exercising their
activities, - within the limits determined by administrative, criminal and
civil legislation of the Russian Federation.
4.3. For causing material damage - within the limits determined
labor and civil legislation of the Russian Federation.
Qualification directory of positions of managers, specialists and other employees
(approved by the Decree of the Ministry of Labor of the Russian Federation of August 21, 1998 N 37)
Engineer for automated production control systems
Job responsibilities. Performs work on the design and implementation of automated production control systems (APCS) based on the use of a combination of economic and mathematical methods, modern computer technology, communications and communications, elements of the theory of economic cybernetics. It studies the system and methods of managing and regulating the activities of the enterprise, its production and functional divisions, determines the possibility of formalizing the elements of the current system and the feasibility of transferring the relevant processes to an automated mode. Carries out the preparation of the necessary data and participates in the preparation of the terms of reference for the design of the automated control system and its individual stages and subsystems, in the development of technical and working projects. Formulates the formulation of tasks, performs work on their algorithmization, identifies the possibilities of typing solutions for individual elements of the system, prepares proposals for the use of standard blocks in the design of automated control systems and participates in their creation. It studies the automated production control systems developed by design organizations and operating at other enterprises in order to use the best practices in the design and operation of automated control systems. Takes part in the work to improve the workflow at the enterprise, formulates requirements for the content and construction of technical and organizational and administrative documentation used in the automated production control system. Develops technological schemes for processing information on the established tasks of the automated control system, taking into account the organizational and technical support for all subsystems. Prepares draft methodological materials, instructions and other technical documentation related to the creation and use of funds for the information use of the automated control system. Participates in the work on debugging, trial operation and phased introduction of a complex of technical means of automated control systems. Carries out architectural supervision and periodic control of incoming and outgoing documentation. It studies the causes of failures and violations in the system, develops proposals for their elimination and prevention, for improving the quality and reliability of the automated control system. Provides methodological assistance to the divisions of the enterprise in preparing data for the automated control system, in preparing the necessary documents and decoding information processed by computer technology.
Must know: resolutions, orders, orders, methodological and regulatory materials on the organization of automated production control systems; prospects for the development of the enterprise; organization of economic planning and operational regulation of production; the structure of the enterprise, production and functional relations between its divisions; tasks and content of the automated control system; the procedure for developing projects for automated control systems and its subsystems, technical specifications, technical and working projects; economic and mathematical methods; fundamentals of the theory of economic cybernetics; means of computer technology, communications and communications; the procedure for setting tasks, their algorithmization; methods for determining the economic efficiency of the introduction of automated control systems; standards of the unified system of organizational and administrative documentation; the procedure for the development and execution of technical documentation; fundamentals of economics, organization of production, labor and management; fundamentals of labor legislation, rules and norms of labor protection.
Qualification requirements.
Engineer for automated production control systems of category I: higher professional (engineering, economic or technical) education and work experience as an engineer for automated production control systems of category II for at least 3 years.
Engineer for automated production control systems Category II: higher professional (engineering-economic or technical) education and work experience as an engineer for automated production control systems or other engineering and technical positions filled by specialists with higher professional (engineering-economic or technical) education , not less than 3 years.
Engineer for automated production control systems: higher professional (engineering-economic or technical) education without presenting requirements for work experience or secondary vocational (engineering-economic or technical) education and at least 3 years of work experience as a technician of category I for at least 3 years or other positions, replaced by specialists with a secondary professional (engineering, economic or technical) education, at least 5 years.