Document section: Sample Documents, Instruction
JOB DESCRIPTION
locksmith of emergency and restoration works of the 4th category
(example form)
1. GENERAL PROVISIONS
1.1. This job description defines functional responsibilities, the rights and responsibility of the locksmith of emergency repair work of the 4th category "__________" (hereinafter referred to as the "organization").
1.2. The locksmith of emergency and restoration works of the 4th category belongs to the category of workers.
1.3. A person with ___________ education and relevant training in the specialty is appointed to the position of an emergency repair worker of the 4th category.
1.4. The locksmith of emergency repair work of the 4th category is appointed and dismissed by the head of the organization on the proposal of ______________.
1.5. The locksmith of emergency repair work of the 4th category reports directly to the ________________ organization.
1.6. In his activities, the emergency repair worker of the 4th category is guided by:
Normative acts on the issues of the work performed;
Methodological materials relating to relevant issues;
Constituent documents of the organization;
Rules work schedule;
Orders and orders of the head of the organization, immediate supervisor;
This job description.
1.7. The locksmith of emergency repair work of the 4th category must know:
Site water supply scheme;
Rules for reading complex drawings and sketches;
Drawing up schemes, sketches and details from nature;
Methods for sealing sockets manually and with the use of pneumatic tools;
Device for tapping under pressure;
Rules and methods for disconnecting metering pipelines and their heating;
The layout of the sewer network of the area in which the work is carried out;
The technology of cleaning the sewer network and collectors hydraulically and removing blockages with a flexible shaft;
The main equipment and mechanisms used in the repair and cleaning of sewer pipelines and structures;
Production rules earthworks in dry soils;
Internal labor regulations;
Safety regulations;
provisions of this job description.
2. FUNCTIONAL RESPONSIBILITIES
2.1. The locksmith of emergency and restoration works of the 4th category carries out:
2.1.1. Performing work on the repair of water supply networks, caulking, pouring with lead and various substitutes for pipe sockets with a diameter of 300 to 900 mm.
2.1.2. Installation and replacement of fittings and fittings on existing networks and highways.
2.1.3. Determining the nature of damage on networks and highways.
2.1.4. Shutdown of individual sections of pipelines, emptying and filling them with the installation of air inlet and outlet air.
2.1.5. Flushing pipelines.
2.1.6. Adjustment of the operation of valves on networks and pipelines.
2.1.7. Taking pressure readings on a manometer.
2.1.8. Tapping under pressure in pipelines.
2.1.9. Production of sewer network and collectors cleaning at a depth of up to 12 m using a hydraulic method.
2.1.10. Removal of blockages by flexible shaft, water jet washout and hydraulic back pressure method using mobile auto-pumps.
2.1.11. Preparation of a cable and a winch with a lifting capacity of up to 1 ton, metal balls and cylinders of a given specific gravity.
2.1.12. Production of repair of the sewer network under the guidance of a locksmith of a higher qualification.
2.1.13. Production of preventive repairs of equipment and mechanisms used in cleaning.
2.1.14. Welding of plastic pipes.
2.1.15. ______________________________.
3. RIGHTS
3.1. The locksmith of emergency and restoration works of the 4th category has the right:
3.1.1. Require the management of the organization to assist in the performance of its official duties.
3.1.2. Pass in in due course certification with the right to receive the appropriate qualification category.
3.1.3. Improve your skills.
3.1.4. Get acquainted with the draft decisions of the organization's management regarding its activities.
3.1.5. Submit proposals on the issues of their activities for consideration by their immediate supervisor.
3.1.6. Receive from employees of the organization the information necessary for the implementation of their activities.
3.1.7. __________________________________________.
4. RESPONSIBILITY
4.1. The locksmith of emergency repair work of the 4th category is responsible for:
4.1.1. For failure to perform or improper performance of their duties stipulated by this job description - in accordance with the current labor law.
4.1.2. For offenses committed during the period of its activities - in accordance with the current civil, administrative and criminal legislation.
4.1.3. For causing material damage- in accordance with applicable law.
4.1.4. For violation of the Internal Labor Regulations, fire safety and safety regulations established in the organization.
4.1.5. __________________________.
5. MODE OF OPERATION
5.1. The mode of operation of a locksmith for emergency repairs of the 4th category is determined in accordance with the Internal Labor Regulations established in the organization.
This job description has been developed in accordance with _________ __________________________________________________________________________. (name, number and date of the document)
AGREED: Legal Counsel ____________ ___________________ (signature) (full name)
"___"__________ ___ G.
Acquainted with the instruction: _____________ ___________________ (signature) (full name)
Save this page.
Locksmith of emergency and restoration works, 2nd category
Job Description.
1. Performing work on the repair of water supply networks under the guidance of a more highly qualified locksmith, cleaning and removing blockages of sewer networks, excavating channels and pits and fixing them; caulking and sealing of joints, pouring and caulking with lead, sulfur alloy or cement pipe sockets.
2. Performing simple locksmith repairs.
3. Toe and lay pipes and fittings.
4. Work on manual drainage mechanisms and pneumatic tools.
Must know:
Installation of drainage mechanisms and pneumatic tools;
- ways to eliminate malfunctions in the operation of mechanisms and pneumatic equipment;
- the frequency and rules of preventive maintenance of tools and fixtures.
Locksmith of emergency and restoration works, 3rd category
Job Description.
1. Performing work on the repair of water supply networks, caulking, pouring lead or sulfur alloy sockets of pipes of small diameters up to 300 mm.
2. Determination of malfunctions of water columns and fire hydrants on the network.
3. Heating of metering pipelines in various ways.
4. Turning on and off the inputs of networks of small diameters according to sketches and diagrams.
5. Manufacture of hydraulic testing of input of networks of small diameters.
6. Cutting pipes of all diameters with rollers, pipelines with a manual drive.
7. Caulking and pouring with lead and various substitutes for pipe mortars under the guidance of a more highly qualified locksmith.
8. Cleaning the sewer network by the hydraulic method, removing blockages in pipes with a flexible shaft to a depth of 7-8 m.
9. Preparation of inflatable balls, disks of the required specific gravity and winches with a lifting capacity of 0.5 tons.
10. Checking the suitability of the cable for work in waste water.
11. Extraction of sediment from the underlying wells.
12. Earthworks with the installation, driving and excavation of metal sheet piles manually or mechanized using water-reducing devices.
13. Installation of plastic pipelines, including socket connections with rubber rings.
Must know:
The device and principle of operation of valves, hydrants, standpipes, pipelines, manual hydraulic presses and pressure gauges;
- rules and methods for sealing sockets with lead and lead substitutes;
- methods for determining the presence of gas in wells;
- method of hydraulic testing;
- ways to eliminate damage to pipelines, fittings, as well as ways to eliminate water leaks;
- methods of chlorination of pipelines with chlorine and bleach;
- reading simple drawings, diagrams and sketches;
- Rules for preventive maintenance of tools and devices.
Locksmith of emergency repair work 4th category
Job Description.
1. Performance of work on the repair of water supply networks, caulking, pouring with lead and various substitutes for pipe sockets with a diameter of more than 300 to 900 mm.
2. Installation and replacement of fittings and fittings on existing networks and highways.
3. Determining the nature of damage on networks and highways.
4. Turning off individual sections of pipelines, emptying and filling them with the installation of air inlets and outlets.
5. Flushing pipelines.
6. Adjustment of the operation of valves on networks and pipelines.
7. Taking readings of pressure on the manometer.
8. Tapping under pressure in pipelines.
9. Production of cleaning the sewer network and collectors at a depth of up to 12 m using a hydraulic method.
10. Removal of blockages by flexible shaft, water jet washout and reverse hydraulic pressure method using mobile auto-pumps.
11. Preparation of a cable and a winch with a lifting capacity of up to 1 ton, metal balls and cylinders of a given specific gravity.
12. Repair of the sewer network under the guidance of a more highly qualified locksmith.
13. Production of preventive maintenance of equipment and mechanisms used in cleaning.
14. Welding of plastic pipes.
Must know:
Site water supply scheme;
- rules for reading complex drawings and sketches;
- drawing up schemes, sketches and details from nature;
- ways of sealing sockets manually and with the use of pneumatic tools;
- device for tapping under pressure;
- rules and methods for disconnecting metering pipelines and their heating;
- layout of the sewerage network of the area in which the work is carried out;
- technology for cleaning the sewer network and collectors in a hydraulic way and removing blockages with a flexible shaft;
- the main equipment and mechanisms used in the repair and cleaning of sewer pipelines and structures;
- rules for earthworks in dry soils.
Locksmith of emergency and restoration works, 5th category
Job Description.
1. Performance of work on the repair of water supply networks, caulking, pouring with lead and various substitutes for pipe sockets with a diameter of more than 900 mm.
2. Connection under pressure of pipes of all diameters with preparation and scraping of large surfaces of saddles to existing pipelines.
3. Chlorination of highways and networks with bleach, liquid or gaseous chlorine in urban areas; discharge of chlorine water after chlorination.
4. Production of emergency repair or filling of stuffing box compensators on pipelines under pressure without turning off the network.
5. Closing and opening of large valves on highways and conduits with an automatic drive, pneumatic drive and electric drive.
6. Installation, regulation and repair of mechanical drives.
7. Cleaning of the sewer network, siphons, channels and collectors of round, ovoid, tent and other sections at a depth of more than 12 m using a hydraulic method.
8. Preparation of cable and winches with a lifting capacity of up to 2 tons.
9. Preparation of wooden and metal cylinders of a given specific gravity.
10. Removing blockages in the sewer network and collectors using various rods with ball and brush anchors.
11. Production of repair of the existing sewer network using dewatering devices and mobile cranes.
12. Bonding and assembly of plastic pipes.
Must know:
The device and principle of operation of equipment for tapping under pressure;
- mode of operation of the site network;
- rules and methods of chlorination of pipelines in urban areas;
- safe ways to discharge water after chlorination of pipelines;
- device and features of the operation of siphons;
- construction of stuffing box compensators on pipelines of various diameters;
- methods of flushing pipelines;
- device and principle of operation of mechanical, hydraulic and electric drives used for opening and closing large gate valves;
- ways to eliminate faults in the applied drives;
- layout of the entire sewer network, emergency outlets;
- technology for cleaning the sewer network, siphons, collectors and channels using the hydraulic method;
- ways to eliminate blockages;
- methods for determining the elimination of gas pollution, the rules for excavation in wet soils, the timing of the repair of mechanisms and equipment.
Locksmith of emergency and restoration works, 6th category
Job Description.
2. Maintenance, adjustment and repair of pipelines, water supply, sewer networks, valves and gate valves with a diameter of more than 1200 mm.
3. Shutdown and start-up of main pipelines.
4. Perform switching on the main collectors and channels.
5. Determination of the state of networks and pipelines with diagnostic devices.
6. Management of a sewer cleaning machine when removing blockages in the sewer network.
7. Management of work on the elimination of accidents, adjustment and start-up of complex equipment.
Must know:
Rules for conducting emergency repair work on large-diameter water supply and sewerage networks;
- layout of the serviced water supply and sewerage network;
- features of welding of pipes working under pressure;
- classification of defects in welded joints, methods for their determination and elimination;
- methods for establishing and eliminating gas contamination.
Work examples.
1. Stop and shield gates, gate - installation and dismantling.
2. Gate valves with a diameter of over 1200 mm - closing, opening and repair.
3. Device for energy explosion - preparation for work.
4. Underground pipelines - repair without excavation.
Locksmith of emergency and restoration works, 7th category
Job Description.
1. Performance of particularly complex emergency and restoration work on existing water supply and sewerage networks.
2. Maintenance, regulation and repair of water supply and sewerage networks: shut-off valves, gate valves, sockets of pipelines with a diameter of more than 1200 to 2000 mm.
3. Installation, dismantling, regulation and testing of equipment for automatic pumping units, compressor equipment, systems automatic regulation temperatures in heat supply networks and water heaters of all types.
4. Work management pumping stations in emergency conditions.
5. Assessment of the technical condition of heat-consuming installations and heating networks with the compilation of a list of defects.
6. Checking the accuracy of the assembly of remanufactured equipment and carrying out a load test.
Must know:
Rules for conducting emergency recovery work on water supply and sewerage networks with large diameter pipelines;
- design features and hydraulic circuits of the repaired equipment;
- methods of repair, assembly, installation of components and parts of serviced equipment;
- admissible values of loadings on knots and mechanisms;
- rules for acceptance of equipment from repair and putting it into operation.
1. The locksmith of emergency and restoration work in the gas sector of the 4th category belongs to the category of workers.
2. A person with an average professional education or initial vocational education and special training and work experience of at least one year.
3. A locksmith for emergency and restoration work in the gas sector of the 4th category is hired and dismissed by the director of the organization on the proposal of the head of production (section, workshop).
4. The locksmith of emergency and restoration work in the gas sector of the 4th category must know:
a) special (professional) knowledge of the position:
Device, rules for the technical operation and repair of household gas equipment, apartment heating boilers with automation, cooking boilers and group cylinder installations liquefied gas;
Rules for launching gas into the network, installation and connection to the network of gas equipment;
Schemes of location of gas pipelines and communications;
Boiler Supervision Rules for the Construction and Safe Operation of Tanks and Other Pressure Vessels;
Rules for conducting emergency repair work on the routes of existing low and medium pressure gas pipelines with a diameter of up to 500 mm inclusive;
Rules for purging, steaming and testing gas pipelines for tightness;
Arrangement of temporary bypasses on emergency gas pipelines;
Production of repair work on socket joints of cast-iron gas pipelines and methods for installing couplings on gas pipelines;
Technical conditions for the installation and operation of underground gas pipelines;
b) general knowledge of the employee of the organization:
Rules and norms of labor protection, safety measures, industrial sanitation and fire protection,
Rules for the use of funds personal protection;
Requirements for the quality of work (services) performed rational organization work in the workplace;
Types of marriage and ways to prevent and eliminate it;
Production alarm.
5. In his activities, a locksmith of emergency and restoration work in the gas sector of the 4th category is guided by:
RF legislation,
the charter of the organization,
Orders and instructions of the director of the organization,
By this job description,
The internal labor regulations of the organization,
6. The locksmith of emergency and restoration work in the gas sector of the 4th category reports directly to the worker with more highly qualified, the head of production (section, workshop) and the director of the organization.
7. During the absence of an emergency repair worker in the gas sector of the 4th category (business trip, vacation, illness, etc.), his duties are performed by a person appointed by the director of the organization on the proposal of the head of production (section, workshop) in the prescribed manner, which acquires corresponding rights, obligations and is responsible for the fulfillment of the duties assigned to him.
II. Job Responsibilities
The duties of a locksmith for emergency and restoration work in the gas sector of the 4th category are:
a) Special (professional) duties:
Performance of emergency repair work on existing gas pipelines of low and medium pressure with a diameter of up to 500 mm inclusive.
Removal of gas condensate from condensate collectors.
Lubrication of taps, testing of gas pipelines for tightness, purging and steaming them.
Digging pits along the route of underground gas pipelines to eliminate the accident.
Performing repair work on the restoration of household gas equipment, cooking boilers, group liquefied gas cylinder installations, as well as gas equipment installed on gas-consuming stoves and other units of industrial, municipal and agricultural enterprises and institutions.
Launching gas into the network and connecting gas equipment to the network.
b) General duties of an employee of the organization:
Compliance with the Internal Labor Regulations and other local regulations of the organization,
Internal rules and norms of labor protection, safety, industrial sanitation and fire protection.
Execution within employment contract orders of employees to which it is repaired in accordance with this instruction.
Performing work on the acceptance and delivery of shifts, cleaning and washing, disinfection of serviced equipment and communications, cleaning the workplace, fixtures, tools, as well as keeping them in good condition;
Maintaining established technical documentation
I approve
[position, signature, full name
manager or other
An official authorized
Approve
[legal form, job description]
organization name, [day, month, year]
enterprises] M. P.
locksmith of emergency and restoration works of the 4th category [name of organization]
This job description has been developed and approved in accordance with the provisions Labor Code Russian Federation, Unified Tariff and Qualification Directory of Works and Occupations of Workers. Issue 69. Sections: "Gas facilities of cities, towns and settlements". "Water supply and sewerage". "Green economy". "Photo works", approved by the Decree of the USSR State Committee for Labor and the All-Union Central Council of Trade Unions of September 13, 1984 N 272 / 17-70; Decree of the Government of the Russian Federation of February 25, 2000 N 163 "On approval of the list heavy work and work with harmful or hazardous conditions labor, in the performance of which it is prohibited to use the labor of persons under eighteen years of age"; Order of the Ministry of Health and social development of the Russian Federation of September 1, 2010 N 777n "On approval of the Model norms for the free issuance of special clothing, special footwear and other personal protective equipment for workers employed in work with harmful and (or) dangerous working conditions, as well as in work performed in special temperature conditions or associated with pollution "and other regulatory legal acts regulating labor relations.
1. General Provisions
1.1. The emergency repair fitter of the 4th category belongs to the category of workers and directly reports to [position title of the immediate supervisor].
1.2. A person at least eighteen years of age who has a secondary vocational education in the specialty [insert the required one] and at least [value] years of work experience in the specialty is accepted for the position of an emergency repair worker of the 4th category.
1.3. An emergency repair fitter of the 4th category is appointed to the position and dismissed from it by order of [name of the position of the head].
1.4. The locksmith of emergency repair work of the 4th category must know:
Installation of drainage mechanisms and pneumatic tools;
Ways to eliminate malfunctions in the operation of mechanisms and pneumatic equipment;
Frequency and rules for preventive maintenance of tools and fixtures;
The device and principle of operation of valves, hydrants, standpipes, pipelines, manual hydraulic presses and pressure gauges;
Rules and methods for sealing sockets with lead and lead substitutes;
Methods for determining the presence of gas in wells;
Method of hydraulic testing;
Ways to eliminate damage to pipelines, fittings, as well as ways to eliminate water leaks;
Methods of chlorination of pipelines with chlorine and bleach;
Reading drawings, diagrams and sketches;
Site water supply scheme;
Drawing up schemes, sketches and details from nature;
Methods for sealing sockets manually and with the use of pneumatic tools;
The device and principle of operation of equipment for tapping under pressure;
Rules and methods for disconnecting metering pipelines and their heating;
The layout of the entire sewer network, emergency outlets;
The technology of cleaning the sewer network and collectors hydraulically and removing blockages with a flexible shaft;
The main equipment and mechanisms used in the repair and cleaning of sewer pipelines and structures;
Rules for the production of earthworks in dry soils;
Types of marriage, causes and ways to prevent it;
Basics of labor legislation;
Internal labor regulations;
Rules of sanitary, personal hygiene;
Rules and norms of labor protection, safety and fire protection.
2. Job responsibilities
The following duties are assigned to the locksmith of emergency repair work of the 4th category:
2.1. Performance of work on the repair of water supply networks, cleaning and elimination of blockages of sewer networks, excavation of channels and pits and fixing them; caulking and sealing of joints, pouring and caulking with lead, sulfur alloy or cement sockets of pipes with diameters up to 900 mm.
2.2. Performing simple plumbing repairs.
2.3. Toe and lay pipes and fittings.
2.4. Work on manual dewatering mechanisms and pneumatic tools.
2.5. Determination of malfunctions of water columns and fire hydrants on the network.
2.6. Heating of metering pipelines in various ways.
2.7. Switching on and off inputs of networks of small diameters according to sketches and diagrams.
2.8. Production of hydraulic testing of input networks of small diameters.
2.9. Cutting pipes of all diameters with rollers, pipelines with a manual drive.
2.10. Caulking and pouring with lead and various substitutes for pipe mortars under the guidance of a more highly qualified locksmith.
2.11. Cleaning the sewer network by the hydraulic method, removing blockages in pipes with a flexible shaft to a depth of 7-8 m.
2.12. Preparation of inflatable balls, disks of the required specific gravity and winches with a lifting capacity of 0.5 tons.
2.13. Checking the suitability of the cable for work in waste water.
2.14. Extraction of sediment from the underlying wells.
2.15. Production of earthworks with the installation, driving and excavation of metal sheet piles manually or mechanized using water-reducing devices.
2.16. Installation of plastic pipelines, including socket connections with rubber rings.
2.17. Installation and replacement of fittings and fittings on existing networks and highways.
2.18. Determining the nature of damage on networks and highways.
2.19. Shutdown of individual sections of pipelines, emptying and filling them with the installation of air inlet and outlet air.
2.20. Flushing of pipelines.
2.21. Adjusting the operation of valves on networks and pipelines.
2.22. Taking pressure readings on a manometer.
2.23. Tapping under pressure in pipelines.
2.24. Production of sewer network and collectors cleaning at a depth of up to 12 m using a hydraulic method.
2.25. Removal of blockages by flexible shaft, water jet washout and hydraulic back pressure method using mobile auto-pumps.
2.26. Preparation of a rope and a winch with a lifting capacity of up to 1 ton, metal balls and cylinders of a given specific gravity.
2.27. Production of repair of the sewer network under the guidance of a locksmith of a higher qualification.
2.28. Production of preventive repairs of equipment and mechanisms used in cleaning.
2.29. Welding of plastic pipes.
2.30. Performing work related to the acceptance and delivery of shifts, timely preparation for work of their workplace, equipment, tools, fixtures and keeping them in proper order.
2.31. Maintaining established technical documentation.
2.32. [Other Job Responsibilities].
3. Rights
The locksmith of emergency and restoration works of the 4th category has the right:
3.1. For all social guarantees provided for by the legislation of the Russian Federation.
3.2. For the free issue of special clothing, special footwear and other personal protective equipment.
APPROVE:
[Job title]
_______________________________
_______________________________
[Name of company]
_______________________________
_______________________/[FULL NAME.]/
"______" _______________ 20___
JOB DESCRIPTION
Locksmith of emergency and restoration works of the 4th category
1. General Provisions
1.1. This job description defines and regulates the powers, functional and job duties, rights and responsibilities of an emergency repair worker of the 4th category [Name of organization in the genitive case] (hereinafter referred to as the Company).
1.2. An emergency repair fitter of the 4th category is appointed to the position and dismissed in accordance with the procedure established by the current labor legislation by order of the head of the Company.
1.3. The emergency repair fitter of the 4th category belongs to the category of workers and reports to [position title of the immediate supervisor in the dative case] of the Company.
1.4. A person with a secondary education, relevant training in the specialty and work experience of at least 1 year is appointed to the position of a locksmith for emergency repair work of the 4th category.
1.5. The locksmith of emergency repair work of the 4th category must know:
- site water supply scheme;
- rules for reading complex drawings and sketches;
- drawing up schemes, sketches and details from nature;
- ways of sealing sockets manually and with the use of pneumatic tools;
- device for tapping under pressure;
- rules and methods for disconnecting metering pipelines, and their heating;
- the layout of the sewerage network of the area in which the work is carried out;
- technology for cleaning the sewer network and collectors hydraulically and removing blockages with a flexible shaft;
- the main equipment and mechanisms used in the repair and cleaning of sewer pipelines and structures;
- rules for the production of earthworks in dry soils.
1.6. In his activities, the emergency repair worker of the 4th category is guided by:
- regulations and teaching materials on issues of work performed;
- internal labor regulations;
- orders and orders of the head of the Company and the immediate supervisor;
- this job description;
- rules on labor protection, safety precautions, industrial sanitation and fire protection.
1.7. During the period of temporary absence of the locksmith of emergency and restoration works of the 4th category, his duties are assigned to [name of the position of the deputy].
2. Job responsibilities
The locksmith of emergency and restoration works of the 4th category is obliged to carry out the following labor functions:
2.1. Performance of work on the repair of water supply networks, caulking, pouring with lead and various substitutes for pipe sockets with a diameter of more than 300 to 900 millimeters.
2.2. Installation and replacement of fittings and fittings on existing networks and highways.
2.3. Determining the nature of damage on networks and highways.
2.4. Shutdown of individual sections of pipelines, emptying and filling them with the installation of air inlet and outlet air.
2.5. Flushing of pipelines.
2.6. Adjusting the operation of valves on networks and pipelines.
2.7. Taking pressure readings on a manometer.
2.8. Tapping under pressure in pipelines.
2.9. Production of cleaning of the sewer network and collectors at a depth of up to 12 meters in a hydraulic way.
2.10. Removal of blockages by flexible shaft, water jet washout and hydraulic back pressure method using mobile auto-pumps.
2.11. Preparation of a rope and a winch with a lifting capacity of up to 1 ton, metal balls and cylinders of a given specific gravity.
2.12. Production of repair of the sewer network under the guidance of a locksmith of a higher qualification.
2.13. Production of preventive repairs of equipment and mechanisms used in cleaning.
2.14. Welding of plastic pipes.
In case of official necessity, an emergency repair fitter of the 4th category may be involved in the performance of his official duties overtime, by decision of the immediate supervisor, in the manner prescribed by law.
3. Rights
The locksmith of emergency and restoration works of the 4th category has the right
3.1. Give assignments to subordinate employees, tasks on a range of issues included in his functional duties.
3.2. Supervise the fulfillment of production tasks, the timely execution of individual orders by subordinate employees.
3.3. Request and receive the necessary materials and documents related to the issues of their activities and the activities of employees subordinate to him.
3.4. Interact with other services of the enterprise on production and other issues that are part of its functional responsibilities.
3.5. Get acquainted with the draft decisions of the enterprise's management regarding the activities of the Division.
3.6. To propose to the head of the proposal to improve the work related to the duties provided for in this Job Description.
3.7. Submit proposals for the consideration of the head of the proposal on the promotion of distinguished employees, the imposition of penalties on violators of production and labor discipline.
3.8. Report to the manager about all identified violations and shortcomings in connection with the work performed.
4. Responsibility and performance evaluation
The locksmith of emergency repair work of the 4th category bears administrative, disciplinary and material (and in some cases provided for by the legislation of the Russian Federation - and criminal) responsibility for:
4.1.1. Non-fulfillment or improper fulfillment of official instructions of the immediate supervisor.
4.1.2. Failure or improper performance of labor functions and the tasks assigned to him.
4.1.3. Unlawful use of the granted official powers, as well as their use for personal purposes.
4.1.4. Inaccurate information about the status of the work entrusted to him.
4.1.5. Failure to take measures to suppress the identified violations of safety regulations, fire and other rules that pose a threat to the activities of the enterprise and its employees.
4.1.6. Failure to enforce labor discipline.
4.2. Evaluation of the work of a locksmith of emergency repair work of the 4th category is carried out:
4.2.1. Direct supervisor - regularly, in the course of the daily implementation by the employee of his labor functions.
4.2.2. Certification Commission enterprises - periodically, but at least once every two years, based on the documented results of work for the evaluation period.
4.3. The main criterion for evaluating the work of an emergency repair worker of the 4th category is the quality, completeness and timeliness of his performance of the tasks provided for in this instruction.
5. Working conditions
5.1. The work schedule of an emergency repair worker of the 4th category is determined in accordance with the internal labor regulations established by the Company.
5.2. In connection with the production need, an emergency repair worker of the 4th category can travel to business trips(including local values).
Familiarized with the instruction ___________ / ____________ / "____" _______ 20__