Tele2 has a technology that solves several problems at once. The "WiFi calls" application allows you to use mobile communications and SMS wherever there is Wi-Fi. Now you can send and receive SMS, as well as talk on the phone in the Moscow metro (unless, of course, the noise of trains does not interfere) and other places where there is no mobile network, as well as use communication and SMS in any country in the world without paying anything for roaming.
When the "WiFi calls" application is launched, incoming calls and SMS are received as usual if the mobile network is available, but WI-Fi is not. If there is Wi-Fi, calls and SMS are received by the application, and for the one who calls you, such a call will be no different from the usual one. It is necessary to make outgoing calls and send SMS in the absence of a mobile network in Wi-Fi mode through the application.
After installing the application, you need to activate it. To do this, Wi-Fi must be turned off and on. Mobile Internet Tele2. Next, the application asks you to turn on Wi-Fi and select networks through which it can work.
The application works only if the phone has a Tele2 SIM card and it is not disabled in the settings of the dual SIM phone. As soon as the SIM card is inactive, an error message appears and the application requires re-activation.
The application always shows its status in the status bar. When it is inactive (no Wi-Fi connection), a circle is shown, when it is active, a circle with a triangle inside. The application tries to connect as soon as Wi-Fi internet appears. Usually the connection takes about 15 seconds. When the application is active, the phone becomes available and SMS messages are received that could not be received before.
The application copies the list of calls and SMS from the lists of calls and SMS of the phone, while calls received and made via Wi-Fi appear in the phone's call list, and SMS received and sent via Wi-Fi are visible only in the application.
Through some Wi-Fi connections, the application is unstable, periodically disconnecting and giving an error. In particular, this was observed when using the MTS home ADSL Internet (formerly Stream).
Application settings.
Wi-Fi networks can be added at any time, in addition, when the application sees that the smartphone is connected to a new Wi-Fi network, it itself offers to add this network to the list.
I checked how the application works on a dual SIM smartphone in various modes. If the smartphone allows you to change the network mode for both SIM cards (and most smartphones can do this now), the application continues to work even if the Tele2 SIM card is set to 2G mode and it does not see the network (in Moscow, Tele2 does not physically have a 2G network). This makes it possible to continue using Tele2 communications in Moscow even when 2G mode is set for the Tele2 SIM card.
The sound quality for calls over Wi-Fi is almost the same as for regular calls over a mobile network.
Calls and SMS through the application are charged in the same way as regular calls and SMS.
I see several applications of the new technology at once:
Use in the Moscow metro. Now the Tele2 network is available only at a few stations, but all cars have Wi-Fi. The WiFi calls app allows you to stay connected in the subway, although you can use it only in the cars, but not on the platforms (the app may not have time to connect to the train's Wi-Fi while it is standing at the platform);
Roaming usage. Now you can make and receive calls, as well as receive and send SMS at home rates, from anywhere in the world by connecting to Wi-Fi.
The ability to use Tele2 mobile communications, where there is no network signal, but there is Wi-Fi (for example, in the basement).
Use in a dual-sim phone when 2G mode is set for the Tele2 sim card.
The main limitations of the technology:
The Tele2 SIM card must be physically present in the phone and be active;
The application does not work through the mobile Internet of another SIM card in a dual SIM phone;
To activate the application, Tele2 mobile Internet is required (there may be problems with this when roaming, so it is important to activate the application before the trip, do not remove or disconnect the Tele2 SIM card. You can turn on "flight mode", activation does not crash).
When the "WiFi calls" application is launched and the smartphone is connected to Wi-Fi, calls and SMS are received through the application, even if there is a mobile network.
The WiFi calling app is available for Android (4.0 and up) and iOS (7 and up). So far, the service has been launched only for Tele2 subscribers in the Moscow region.
2016, Alexey Nadezhin
The main topic of my blog is technology in human life. I write reviews, share experiences, talk about all sorts of interesting things. I also make reports from interesting places and talk about interesting events.
Add me to your friend list
A router is a device designed to provide access to wireless internet computers, tablets. It is ideal for any modern phone model. Speaking plain language, the router is very similar to, only more versatile. Its main difference from a modem is that it “distributes” Internet traffic via Wi-Fi, and for this a modem needs to be connected to a computer or laptop via a USB port. In general, these two devices are similar to each other: neither the router nor the modem will be able to work without using it, because it is she who transmits traffic.
The router on Tele2 can receive different signals - both 3G and, thereby creating a wireless Wi-Fi network, thanks to which Internet access becomes possible. All of them are fully compatible with the Internet from Tele2.
Among the routers, there are several different types, for example, a portable gadget equipped with a battery. It will provide network access in every place where there is adequate network coverage (recently it has become much larger, which makes the task many times easier). There are more powerful gadgets of this type, which have a wide range of functions. If the client needs a portable mobile router with the ability to connect to the Internet regardless of location, it would be best to opt for a 3-4G device that can be used even while in the car.
If it is planned to use 3-4G networks as backup or main channels if it is impossible to connect to a wired network, it is better to choose a fixed plan router. Its functionality is much richer, it will not take long to set it up, and the coverage radius of the Wi-Fi network is much wider than that of portable options.
If you have any doubts about the purchase of a router, you can contact any nearest salon cellular communication Tele2 and under the guidance of experienced sellers, choose the model that will be most suitable. Also in the salons can provide assistance in case of problems with the settings.
Advantages and features of modern networks
Not so long ago, only a 2G network was available c maximum speed The Internet was 474 kbps, and it was considered a big breakthrough in wireless technology. At the present stage, the distribution of network coverage, which is the fourth generation - 4G, is becoming more and more active. The speed of this network is over 100 megabits per second, and it works perfectly in all major cities. If there is no 4G coverage yet, you can always use the "fallback" in the form of a 3G network. The router will quickly find the network that is in this moment is available.
Thanks to the obvious progress in the field of wireless connections and the clear improvement in the quality of communication, wired Internet used less and less wireless networks are becoming more and more in demand - due to the fact that it is very convenient for business trips, vacations and other long trips with constant movement. The efficiency of the devices connected to the network increases significantly.
As for the Tele2 operator, every year it improves its performance in terms of providing consumers with both improved communication quality and gadgets with which it can be easily and inexpensively implemented. Tele2 offers users 3 and 4G routers. Below are brief descriptions of their characteristics and features of the settings.
3G router from Tele2
All Tele2 routers are manufactured by ZTE. Distinctive features of this product - compactness and universality. With it, you can access the Internet from any gadget: phone, laptop, tablet, and you can connect up to 10 portable devices at the same time.
His signal reception path looks like this: first, he “catches” the network from the operator, and then “distributes” the Internet between all gadgets connected to it. It is very convenient that this router does not require the installation of specialized software in order to set it up and start working. You just need to insert a SIM card into it and connect to available network and it will do the rest automatically. Inside the device there is a battery that will allow you to stay connected up to 4.5 hours.
Main specifications Tele2 3G routers look like this:
- maximum internet speed up to 21 Mbps - subject to 3G network coverage from Tele2;
- with a range of 10 meters the ability to connect up to 10 different gadgets ;
- Battery capacity router is 1500 mAh;
- continuous operating time up to 4.5 hours ;
- support 3 and 2G network option - a great "fallback" in case there is no 4G coverage.
In addition to a high-capacity battery, the device has indicators and two slots: for a flash card and a SIM card. Setting up the Tele2 router on your own will not be difficult: you need to insert a SIM card into the slot intended for it and connect the device. Previously, setting up such gadgets was very troublesome. Now routers from Tele2 already have all the necessary firmware, equipped with the installed settings. Each gadget is equipped with clear and understandable instructions for use.
Insert a SIM card from Tele2 into the router, find an access point on the computer and connect the device to it. The device is equipped with two slots: the second is designed to insert a memory card into it, which can serve as an additional storage device. If the gadget is connected to a PC via a USB port, you can work with this card.
The 3G router from Tele2 has many functions, is easy to set up and operate, reliable and, being connected to any electronic media, is able to cover large coverage areas. It supports all types of Wi-Fi, as well as 2 and 3G coverage areas.
4G router from Tele2
This device is also manufactured by ZTE. If necessary, you can work with it in the coverage area 2 and 3G. This gadget is even more compact than 3G, but it has one significant feature: the lack of battery when powered only from a personal computer via a USB port.
It also has two slots: for a memory card and for a SIM card. The “Wi-Fi distribution” function is theoretically available, but it will need to be pre-configured from a computer connected to the router. By the way, this option is present on every desktop computer or laptop, but very few users know about it.
Setting up a 4G router is very simple: you need to connect it to a PC, and the settings will be carried out automatically. If the setup does not start, in the section " My computer" in step " Removable drive"(we are talking about a router) you should run the file AutoRun.exe. After the installation is completed, all that remains is to run the program. The system should notify the user with a message about the connection establishment.
If the router settings for some reason still failed, you should seek the advice of specialists.
If there is no 4G network, the device will work on 3G, 3G Wi-Gi or 2G networks. It is clear that the speed will become much less, but you will stay connected all the time, and the Internet will not stop working. For example, if you are traveling by train, this option can help you out in any situation.
How much does Internet Tele2 cost for a router
In order to find out which tariffs are the most profitable, you should immediately consult with specialists and purchase the optimal Internet package along with the purchase of a router. Usually the price for a minimum package of 7 GB for 30 days is 499 rubles. This tariff plan can be changed to another at any time. The largest package of 50 GB for 30 days at a cost of 999 rubles has almost the same benefits as unlimited Internet. You can always ask about what else there are and what bonuses are offered to customers in the nearest Tele2 salon.
Thus, acquiring any wifi router from Tele2, you get an excellent opportunity to stay in touch anytime and anywhere - of course, in those places where there is any network coverage - from 2 to 4G. Such a device is perfect for giving, for home and car. When choosing, you need to consider what network coverage prevails in your area and where you plan to use it. Experienced specialists will always help you choose the best option in order to stay in touch under any circumstances.
10.05.2018
Setting up a Wi-Fi router Tele2 is, in general, quite simple and accessible to any user. So, if you have just become the proud owner of this device or are just going to buy it, then from our article you can learn how to quickly and easily set up a router and connect a desktop computer, laptop or any other device to it.
Don't know how to use it correctly? In our other article you will find detailed instructions to this device and the basic rules for its use.
Briefly on the topic
- Take the router out of the package and carefully remove its back cover.
- Insert the SIM card of the operator Tele2 into the slot intended for it.
- Replace the battery and close the cover.
Tele2 routers: their varieties and approximate cost
The official online store of the Tele2 network offers us a choice of two devices - a 3G and 4G router. They differ both in the possible data transfer rate and in price. Below we will give them detailed characteristics and tell you how much each of them costs.
Attention! Prices are given from the official website of the Tele2 operator's online store in the Moscow region.
Wi-Fi router with a 4G Tele2 SIM card - specifications
- Price - 3 190 rubles
- The maximum possible data transfer/reception speed is up to 100 megabytes per second.
- Battery power - 2000 mAh
- Support for LTE FDD - 800/1800/2600 MHz
- WiFi - 802.11b/g/n
Wi-Fi router 3G - specifications
- Price - 1 899 rubles
- The largest number of devices to connect - 10
- The maximum possible data transfer/reception speed is up to 42 megabytes per second.
- Battery power - 1500 mAh
- Support UMTS/HSPA+ - 900/2100 MHz
- GSM support - 850/900/1800/1900 MHz
- WiFi - 802.11b/g/n
The operator has a lot of interesting services that will make your communication most convenient, the “Everywhere at home” service will help you communicate with your loved ones even if they are a thousand kilometers away from you. You can read about how to activate the service "Everywhere at home" on Tele2.
So, the above data will tell a professional, if not everything, then a lot. And if you're not very technically savvy, then brief comparison both models can say the following: a 4G router undoubtedly wins against a 3G router in many ways - it has a more powerful battery, which means it will work longer without additional power; it supports more advanced data reception technology, so the connection will be more stable and processes such as downloading large files or watching online videos will be faster and smoother.
But, do not forget that if there is not a sufficiently high signal level, then even the most advanced device will work mediocrely and give out a weak signal. The signal level, as you know, is determined by the distance between you and the nearest tower of your cellular operator, so before buying, do not be too lazy to take an interest in the coverage map (this is the frequency of the towers installed on the ground) of the area you need.
Do you want to know what Tele2 Internet tariffs are available for a modem? You can read about this in our other article, also located on this site.
Setting up a mobile 3G / 4G Wi-Fi router Tele2
If you have already purchased any of the above devices, then it's time to make its initial setup. To do this, follow the instructions below
Mobile 3G / 4G Wi-Fi router Tele2: instructions for use
- Take the router out of the package and carefully slide the back panel off, and then remove it.
- Insert the SIM card of the Tele2 operator into the slot intended for it. This device only works with SIM cards of its operator! The Tele2 mobile router should not be subjected to such actions as “unlocking” and the like - this will lead to a loss of warranty and possible damage to the device!
- Install the battery in its place and close the cover.
- Your router is now ready to go. To turn it on, press and hold the large key in the center.
Since the device does not have its own screen, further settings, if they are required, for example, setting your own password or changing the network name, must be carried out after connecting the router to a computer or laptop. 
Router Tele2: how to connect to a computer?
There are two main ways to use WiFi router. The first one is connected via a Wi-Fi network, and the second one is connected via a USB cable. Both of them can be useful to you - for example, the first one is suitable if you connect several devices to one access point, and the second one can be used if the battery on the router is almost dead.
Method one - via Wi-Fi
- Turn on the router and find its network from your computer or laptop.
- Among the available connections, select the name of your router (it is on the sticker placed on the device) and click "Connect".
- Enter the password if the system asks for it (the password can also be found on the sticker) and click on OK.
Method two - via USB
- Insert the cable into the socket of the device, and then connect it to the computer.
- Press the power button on the router. Your computer's OS will recognize it and install the necessary software.
- Wait until the connection is completed.
3G / 4G router Tele2: instructions for entering the configuration page
- When you make sure that the connection between the router and the laptop or computer is established, open a browser on the PC.
- Enter the following address in its address bar: https://192.168.0.1 or http://ufl.ztedevise.com
- You will be required to enter a password. The network address (SSID) and password can always be found on the label affixed to the device. The default password is admin.
- Now you can enter the configuration page. To change your password or SSID, open Settings.
- Now go to the Wi-Fi tab and find the section in it "Basic settings".
- Here you can change the network name and password in the corresponding lines. When everything is ready, click on "Apply".
So, now you know the basics of working with the Tele2 4G router. We will be very happy if our article helped you a little to understand everything and now you can
The ability to make and receive calls via Wi-Fi from your phone number is now “in the subject”, since one of the most popular situations is calls in international roaming. It's good that they launched before the start of the New Year's travel season. Also to compensate for the lack of coverage in the subway and in problem areas. There are a number of limitations and inconveniences, but it works and may well come in handy
Wi-Fi calls
An interesting and useful thing, in some cases it can be very “fit”. The installed and running application allows you to make and receive calls via the Internet, for this a Wi-Fi connection is used. The application also knows how to send and receive SMS messages. Not to be confused with VoWiFi technology (Voice over WiFi), with VoWiFi, the smartphone fully works in a Wi-Fi network, as in a cellular one. In our case, "Wi-Fi calls" uses the data network to "transport" voice and SMS in both directions. For your interlocutor, nothing changes: calls / SMS come to him from your number, and he also calls to your regular Tele2 number. The service is currently available only in the Tele2 network of the Moscow region.
The closest analogue is a similar MTS Connect solution, which was launched in the Moscow region exactly a year ago, you can read our review. The Tele2 option is simpler and does not have additional functionality that the MTS application is literally stuffed with. Is it good or bad? Hard to say. It is necessary to actively use both and compare. In theory, something simpler should work more stable, but this is not always the case.
You can download the WiFi Calls app from the App Store or Play Market, Android (version 4.0 and above) and iOS (version 7.0 and above) are supported. Version for Android smartphones.
For whom?
You do not receive additional financial benefits, money for calls is debited according to your tariff. Or, respectively, minutes/SMS from the package. Free calls between users of this service are also not provided. The main advantage is your home tariff, which you use when calling from anywhere, even from Australia. In international roaming, you can save money, and at work it can be useful and practical.
In the presence of a Wi-Fi network, the issue of coverage in problem areas is solved. Relevant for the Moscow region, and, I'm afraid, will be relevant for a long time. Even in areas with good coverage, everyone has problem points, basements and vice versa, the upper floors of high-rise buildings. base stations Tele2 are often placed in Moscow and "shine" low.
Communication in the subway. This is a valuable plus for Moscow Tele2 subscribers. I read complaints like “does not work!” and “does not work well”, but there are also many positive reviews. If it works, but not well, I would first advise you to avoid the cars in the middle and try to enter closer to the beginning or end of the train.
Last time during the discussion there was a popular topic: “Why on earth should I also pay for the Internet ?! The operator has problems with coverage, and he wants to solve them at my expense! The same was written when discussing femtocells. If you have no problems, then you really do not need this service, except in roaming. If problems occur, then you can try to change the operator or get by with these “WiFi calls”, it’s a master’s business. What-no, but a solution that is free and working, although working and not perfect. You can still write complaints and be indignant, but this is not very effective. The cover that miraculously appeared after complaints is more often a coincidence.
Peculiarities
For many, the main disadvantage is the mandatory binding to a SIM card with a valid Tele2 contract. For the recipient of the call, a call from the application is no different from a regular call from the owner's phone. You can install the application on any device, but it will not work without a Tele2 SIM card. Moreover, the application will not work even in a device with two SIM cards if the Tele2 SIM card is installed in the second slot. Why did they do that? The reasons are obvious. Firstly, binding to a SIM card guarantees the correct location of the caller. For example, cellular operators, at the request of the relevant authorities, are required to provide information, including the place where the call was made. Secondly, by separating the application from the SIM card, we get the opportunity for several people to use one “instance” of the tariff, this is unprofitable for the operator. In fact, linking an application to a SIM card works like a prohibition on sim card cloning.
When the application is activated, some services are disabled. Personally, I feel sorry for "You called", it's inconvenient without it. There is a suspicion that after the removal of the program, the “You have been called” service will have to be reconnected through the Personal Account. About permission to determine the location, see above, and access to the camera is needed, most likely, to add a photo to a contact. Upon activation, you will need access to the Internet on the SIM card that you link to the application. Without this, the service cannot be activated. Why Internet from a SIM card during activation? Too lazy to guess, but there must be reasons, they didn’t do it out of harm? For example, to disable services upon activation, to determine the number / user without any SMS and passwords.
You can only call through WiFi connection, it is impossible to use data transfer from a Tele2 SIM card or another operator for this. An unfortunate limitation. It would be tempting to use another operator's SIM card to get the Internet, and make and receive calls from your own number. Or even use the new Tele2 option “Internet does not rest” on your SIM card for this when traveling.
There is no handover when calling, if you left the Wi-Fi zone during a call, the connection will be disconnected, and will not switch to cellular network. Switching to another Wi-Fi point without interrupting the connection is also not possible.
Impression
It was easier for me, I went through all these activation and installation suffering with the MTS Connect application and was mentally prepared for the fact that it was unlikely to work “with a half kick”. And I repeat: for authorization, you need the Internet from an authorized Tele2 SIM card, on a dual SIM card, this SIM card must be in the first slot, it will not work without a full set of permissions. Android versions 4.0 or higher and iOS versions 7.0 or higher are supported. Also, the Wi-Fi signal should be good. Yes, not every Wi-Fi is suitable, as it turned out during the testing process.
Believe me, I read the description carefully, carefully read all the warnings. And still, this thing was configured for me only on the third attempt. The reason for science is unknown, I did not change anything in the settings and did not try to reinstall. And if on the fifth try? I suspect that some of the complainers simply did not "try" the required number of times.
Then the device did not like my home Wi-Fi. Calls do not go through, the phone beeps and gives the message "network unavailable". After the 10th attempt to call from / to, I sat down to think what could be changed, I started from the access point. Miraculously, everything immediately worked on another router with a Beeline sim card. What did he not like about the home router? It seems that the signal level was not bad either ... In general, you need to keep in mind the possibility of such a “plug”.
There are no complaints about voice transmission, the quality is at a good level. It seemed a little muffled and noticeably quieter than with a direct telephone connection. But not critical. SMS arrived instantly. The collected connection success statistics are about 20% only on the second attempt (dialling the number immediately), not once on the third. The remaining 80% from the first. I watched with interest the data transfer rate indicator, the numbers are different. Seen minimum flow - 35-45 Kbps, maximum - 140-170 Kbps during the conversation. Most often in the range of 70-90 Kbps. It is not so demanding on connection speed. Wi-Fi from the “wire” is desirable, but it also works fine via LTE, without delays and “stuttering”. As in any ip-telephony, the response time (ping) is more important than the speed in the data channel.
There are few settings, and they are all intuitive. You can allow the application to work only with voice (without receiving / sending SMS), you can disable autorun after turning on the phone. Special thanks to the developers for the "Exit Application" menu item.
It's a pity that you can only make calls from the application via Wi-Fi, in certain scenarios you will have to use a mobile router or a second phone. Probably, some positive can be found in the fact that if you already called from the application and you succeeded, then you probably called via Wi-Fi.
Summary
The purpose of the service is described in detail in the "For whom" section, although there may be other scenarios. You need to understand that this is not a universal communication environment and not another "Skype Killer". This is an additional tool that allows you to fix local problems or solve some specific problems. In this capacity, the program should be considered, nothing more. And, of course, there will be many fair grievances on the topic “why only for Moscow?!”.
It is now possible to be always in touch! Service "Wi-Fi calls" has made this service possible anywhere in the world. Each Wi-Fi hotspot turns into a place where you can use apps " WiFi calls". This application is suitable for travelers, those who often find themselves out of range, and best of all for those who do not prefer to spend large sums on calls. Now you do not need to use roaming services or expensive Internet while roaming. Staying always connected is now possible !
In order to make a call, you no longer need the operator's mobile network, now you will only need any place with access to a Wi-Fi network. The application "Wi-Fi calls" will allow you to communicate not only by mobile phone numbers, but also call to city lines. Going on a business trip or traveling the world, the main question remains: how not to spend a lot of money on the phone, calling up to family and friends? Now there is an answer!
Now you can not even remember how much money is in your account when you are in Bali, but enjoy your vacation, exchanging impressions. The cost of services remains the same as during calls and using the Internet within Moscow. By connecting your smartphone to any of the available Wi-Fi points, you will immediately be able to make calls using the "Wi-Fi calls" application.
This application is available for users of IOS 7 (and above) or Android 4.0 (and above). "Who called", "Call forwarding", "Voicemail" these services are not available together and the application " WiFi calls", will disable them automatically immediately after activation. Using the Tele2 service is possible only for subscribers of the city of Moscow and the Moscow region. It is especially popular in metro lines where TELE2 mobile communications do not work.
In default mode or during active use of the application, all messages or calls will go through "Wi-Fi calls". If you encounter any problems or deterioration in the quality of communication, you should immediately contact technical support WiFi networks.
The "Who called" service does not work when using the "WI-FI calls" service. Therefore, we recommend disabling it with the command *156*10# . You can connect it again with *155*331# command.
How to restore the functionality of the "Call Forwarding", "Voice Mail" and "Who called" services
To restore the services "Who called", "", "Voice mail" you will need to do the following:
- Remove the application from use, that is, from your smartphone
- The "Wi-Fi calls" service must be disabled separately using your personal account in the "My Tele2" application, and this is also possible using the code *156*10#
- Set up all the services you need in the same way using personal account"My Tele2"
Service activation
To activate the service, you need to download apk, the network connection speed must be at least the specified one (that is, at least 200 Kbps). To start using this service, you need to download an additional application in the App Store or Play Market. Then follow the instructions in the application. The activation of this service and the application itself occurs when the smartphone is connected to the network of its operator. Wi-fi activation is not possible.
Application activation
Disable Wi-Fi call service.
In order to deactivate this service, you do not need to go to a mobile phone salon. You can deactivate as follows.