Repainting your car is not easy. It is important to follow the technology, which is a lot of complexities and nuances. In addition, it is necessary to provide all the necessary conditions so that the paint lies evenly and has all the conditions for quick drying. This requires a special camera. Today you will learn how to construct a spray booth with your own hands.
You need to paint the car not just in the garage, but in a specially prepared place. This refers to a special chamber that provides the following conditions and functions:
- Purification of outdoor air from dust, heated air, as well as from paint residues and unpleasant odors.
- Car painting. It is important to understand here that for work you still need air, which is drawn into the room, heated to 20 degrees, and then pulled out into the street.
- Drying paint. Drying paintwork is a very lengthy process that must be carried out in the most favorable conditions. To do this, you need to clean the air and supply it at a temperature of 60 degrees Celsius.
Spray booth It has great amount advantages, among which is the complete absence of dust, which prevents normal painting. The design of air inflows ensures normal air supply and completely cleans it. In addition, there should be no drafts in the chamber, which is achieved by a unique ceiling system. Of course, such a pleasure is very expensive, but if you wish, you can build such a camera yourself, as well as paint cars professionally.
Construction methods and drawings
drawings you can
Before organizing such a chamber, it must be taken into account that it consists of the following elements: a working room, an air vent, an air intake, special filters, heating equipment and a mode control system. The next stage is the fulfillment of two conditions: the selection of premises, wall decoration, as well as the arrangement of lighting and ventilation systems.
If we talk about the premises, then perhaps the most common option is to remake an old garage. In addition, you can use other non-residential premises even without heating. The presence of the latter factor is not necessary at all, but there should be air heating systems in the chamber.
A concrete garage is ideal for a spray booth. The fact is that it has walls that are flush with the floor. This means that entry into it will be convenient, and air exchange will not be difficult. If you want to use a metal garage, then it must be placed inside a concrete room and raised 30 centimeters above the ground. At the same time, entry will be provided through a special bridge. It is recommended to decorate the walls with plastic clapboard.
The second most important issue is the task of creating good lighting. It should be borne in mind that conventional ceiling lamps will not be enough here. The car should be well lit from almost all sides. This means that the fixtures must be evenly distributed, both on the ceiling and on the walls. LED or fluorescent lamps are well used as a light source. Incandescent lamps are not suitable in this case.
As for ventilation, things are much more complicated here. This is a very complex system that will really require "golden hands" from you. The main problem of the room in which the car is painted is the presence of solvent vapors, as well as small paint particles. All this affects not only the human respiratory system, but also creates poor conditions for the painted surface.The air exchange system in the chamber must be a supply and exhaust system. Air is supplied by an electric pump. In addition to the only air inflow, it is necessary to make several hoods.
The system must ensure that outdoor air is taken in, filtered, and circulated through the room before painting begins. During the operation of the painting equipment, the air must warm up to 20 degrees Celsius, and the mist caused by paint particles must be removed through special openings in the chamber floor. Another mode of the ventilation system is drying. In this case, the air must be supplied heated to a temperature of 60 degrees Celsius.
The arrangement of the painting box is up to you. You should arrange the equipment as you see fit. Many masters store it in a completely different place, and then simply bring it in before starting work.
Sometimes it is easier for a driver to make a device for car repair with his own hands than to constantly spend money on the services of service stations. In addition to saving, the motorist will be able to carefully and with all his zeal to repair the car. For quality and effective work with the car body, drivers use the camera for painting. This is a unique device that allows you to independently update the color of a car and do it no worse than professionals. The user receives a high-quality result, which, with careful and careful handling, lasts for many years.
Requirements for the premises of the spray booths
The spray booth is a unique room in which paint and varnish materials are applied to the surfaces of cars, motorcycles and other metal products. They are different types and sizes, various materials are used in their construction, and they are aimed at performing certain tasks.
car painting room
Among the requirements put forward to the camera room, it is worth highlighting the following:
- The air in the room must be cleaned.
- The camera should be equipped with good lighting, close to daylight.
- Quick access to the set temperature and stability of indicators for a certain time is the key to a high-quality result.
- The air in the room at the inlet and outlet must be cleaned.
- The spray booth must be safe and economically consume electricity, fuel, and other materials.
One of the main requirements is the choice of dimensions. The convenience of work and the ability of the master to place all the necessary tools at hand depend on the correctly chosen dimensions of the chamber.
Advantages of a homemade camera for painting cars
Do-it-yourself spray booth is quite real challenge, and it is within the power of every driver. It will save significant funds and requires only compliance with safety rules and the technique of applying paints and varnishes.
The main features of the camera are:
- Independent selection of drawings and schemes for the execution of systems.
- Profitability.
- The ability to connect expensive devices with cheap parts made by oneself.
- Simplifying the functioning of systems or the ability to replace them with more efficient ones.
Do-it-yourself spray booth
Its main advantage is that a do-it-yourself car painting booth is easy to maintain, and the result is much cheaper than painting at a service station.
Spray booth lighting is an important parameter when painting a car.
For efficient and high-quality work, the room for painting must meet a number of requirements, one of which is lighting. Having properly organized the process, the master will be able to paint the body like a real professional. It should be noted that during operation there is a strong spray of paint, which automatically worsens visibility several times.
Before starting work, it is recommended to calculate the number of lamps and place them correctly. To ensure excellent illumination and visibility of all defects, it is necessary to focus on the illumination rate of 1000–2000 lux. You can use one of the lighting schemes: ceiling, ceiling-wall or enhanced lighting of the rear wall of the room. The second scheme is considered the most convenient and effective.
Since daylight (close to sunlight) in the chamber is one of the most important aspects when painting a car, it is recommended to place the lamps in several rows so that they are on different levels. This will improve the visualization and as a result provide excellent painting. The minimum recommended number of lamps is 24 pieces.
Lighting in the spray booth
The user can purchase incandescent lamps, LED lamps or fluorescent lamps. All three options differ in power and cost. Depending on the characteristics and the estimated budget, everyone chooses the most suitable option.
Room ventilation, air purification and drying
A prerequisite for the proper functioning of the spray booth is the presence of ventilation. It is important that the room has the required level of humidity, cleanliness and air movement - all this is provided by the ventilation system.
Ventilation allows:
- to clean the air from the steam released during the performance of work;
- remove dust and small particles, as well as prevent them from getting on fresh paint;
- regulate temperature and humidity.
In order for the camera to perform its functions and provide excellent results, certain conditions must be met:
- Air movement must be uniform and directed.
- Compliance with the temperature regime (22–24 degrees are considered ideal indicators).
Ventilation allows you to clean the air from steam
- Maintaining optimal humidity, namely 50-70%.
- Use of a vertical ventilation system.
Before installing ventilation, you should decide on the choice of device. There are single-engine, twin-engine and supply and exhaust types of the system. For large volumes of work uses the latter type of ventilation. Regular user for high-quality air purification, a twin-engine system with high performance is suitable.
The supply and exhaust ventilation system perfectly circulates and purifies the air, provides optimal temperature regime and drying of finished products.
What is a spray booth made of?
Before you think about the question: “how to make a spray booth?”, You should decide what the design should consist of.
The main element is a closed room. This is the chamber in which the coating and drying of the machine is carried out directly. The second element in a row, but not in importance, is the ventilation system. The chamber must also be equipped with a heating unit and an extractor hood with filters.
The spray booth should have airtight doors, good lighting, suitable dimensions and high-quality wiring (preferably copper). All lighting devices must be positioned so that the surface of the product to be painted is illuminated as much as possible.
You can not neglect any of the elements of the spray booth. Since the working capacity and health of the master and, of course, the quality of the surface coating depend on them.
The spray booth must have sealed doors
How to make a spray booth
Before starting work, it is recommended to develop an action plan and a chamber diagram. Having planned the room and decided on the size, it is necessary to choose materials for the floor and wall decoration, collect air exchange and a coarse floor filter, and provide high-quality lighting. More on this below.
Arrangement of a garage room for a simple spray booth
Do-it-yourself paint brushes are a reality! Today, many motorists are thinking about building a camera on their own. Alternatively, you can use the garage space and convert it into an ideal place for painting work. The camera can be used constantly or occasionally, for business or personal purposes. This is absolutely irrelevant, it is important that the requirements in relation to the design and safety precautions are observed.
For safe and efficient operation, a garage assessment should be made before starting a garage conversion. As noted above, the size of the room is very important for comfortable and productive work, so the height must be at least 2.8 m, the area, in turn, should be at least 6 × 4 m. The room must be insulated with non-combustible materials and painted white. Tiled walls are recommended to be made matte. But the main evaluation criterion is tightness. If it is not possible to create it, it is better to abandon the idea.
The floor of the chamber should consist of a multi-level frame
How to get started:
- Lighting. It is recommended to mount a ceiling-wall light to ensure the most comfortable working conditions. Sources can be LED lamps or fluorescent lamps. In addition, it is necessary to have a swivel lamp on a long leg. It will provide additional local lighting of any part of the body.
- Ventilation. It is necessary to install the system at the location of the paint bath. After making the calculations, the user will be able to determine the ventilation power and purchase devices in sufficient quantities. The most effective is the presence of two fans: the first draws air from the room, and the second blows it from the outside, providing an influx of purified air from outside. As a rule, the device operates in three modes: cleaning, circulation and heating to the desired temperature, drying is carried out when heated to 60 degrees.
- Floor equipment. The floor should consist of a multi-level frame. This is necessary for laying ventilation pipes. Conveniently, if there is a viewing hole, you can cover it with a reinforcing grate and put boards under it.
The hood can be installed under the car, but getting paint on the device is highly undesirable.
The device in the garage of a semi-professional spray booth
It is easier to equip a semi-professional camera in the garage, but it will cost several times more. For work, any type of garage is also suitable, in which a supply and exhaust ventilation system is installed. The room is recommended to be sheathed with sheet metal or insulation. It would be appropriate to purchase a compressor, a receiver, a set of filters and a system for trapping water and oil vapor.
Conclusion
If a car enthusiast has the opportunity to convert a garage into a spray booth, then you should definitely use it. To achieve an excellent result, it is enough to properly organize the work and observe safety measures. Pledge of high quality
To carry out the procedure for painting a car, it is necessary to have not only suitable paint and varnish products, but also equipment. For this purpose, cameras are used for painting cars or their individual parts. To date, this equipment is produced by a variety of industrial enterprises. Also, a do-it-yourself spray booth can be made directly in the garage.
The painting chamber is a small room in which all conditions are created for the high-quality application of any paintwork. During the staining procedure, a certain air temperature is maintained in it. Camera equipped modern systems ventilation and filtration. In many auto repair shops, this camera is used quite often. It is thanks to her that it is possible to carry out all paint and varnish work at a high level.
The most optimal air circulation is created in the room. Due to this, polluted air, which is inherent in all rooms where paint and varnish work is carried out, is brought out. Before that, it goes through a filtering procedure through filters, which are usually located on the floor of such a chamber.
The advantage of using a booth for painting cars and other items is that the air filled with volatile substances, which are found in almost every type of paint and varnish product, is purified and only then enters the atmosphere.
The chamber is always perfectly clean. Thanks to this, at the moment of drying paint or varnish on the surface of the car, a layer of dust is not formed, which will make the appearance sloppy.
Modern spray booths have an improved look and performance. They are equipped additional systems security. Thanks to this, they always maintain the optimum temperature for work. Automated system able to control the temperature of the air. When the temperature rises to the heating level required by the standard, the camera turns off the heating function by itself.
The chambers have built-in timers that, at regular intervals, remove the air with toxins from the paint outside. Thanks to this option, cases of fire hazardous situations are excluded.
In the spray booth, the process of applying paint products to the surface of cars is complex. It has several stages. The camera uses several operating modes that allow you to apply paint and varnish evenly and accurately.
Spray booth price depends on its specifications and from the manufacturer. On average, a high-tech camera for painting cars can be purchased from 400 thousand rubles. On the secondary market spray booth models are cheaper.
Today there are a large number of companies that specialize in the production of spray booths. They offer consumers various kinds of them. However, not everyone can afford to buy a camera for 400-500 thousand rubles and try to make such a device in their garage. Not many people know how to make a spray booth. The procedure for its manufacture does not belong to the category of simple.
First you need to choose the right room. It must be well ventilated and the following requirements:
- ceiling height should not be less than 2.8 meters.
- length and width should be 6 and 4 respectively.
- the room must have insulation that is resistant to the formation of fire.
- To cover the walls, it is best to use a matte white film. It must have a magnetizing effect.
- All coatings for individual areas of the room should have a matte texture.
- The space must be sealed.
Knowing these features, you can easily create a camera in your garage. This will save you a lot. After all, the purchase of the necessary materials will require small costs.
To create a camera, you will have to redo your garage completely.
Important: Care must be taken to ensure that the ventilation system is established in the room. If there is an inspection hole under the garage, then ventilation can also be done. For this, metal gratings can be used.
If there is none, then first you need to dig a small trench in the floor. Its depth must be at least a meter.
The garage, which is being converted into a car painting booth, needs to be insulated. For this, it is recommended to use mineral wool.
Lighting is important to make it as comfortable as possible. For this purpose it is necessary to use fluorescent lamps. They give an excellent level of glow.
DIY spray booth video
Do-it-yourself drawings of a spray booth
Spray booth plans.
2.
In the modern world, there are many models of cameras for painting cars. They are representatives of only two types:
- spray booths with a water curtain for air filtration,
- spray booths with dry air filtration.
Painting cars with your own hands is a responsible procedure that requires compliance with a number of conditions. A specialized camera for painting cars with your own hands - this option is chosen by many motorists today. The purchase of such an object will not be cheap, so some prefer to independently provide what a do-it-yourself spray booth requires - drawings, materials, assembly.
Painting a car in this way has a number of serious advantages over using an airbrush in your own garage. Due to the tightness, you can not worry about the ingress of foreign particles of dust and dirt onto the surface to be painted.
In addition, the design eliminates the occurrence of unwanted air turbulence, due to which the enamel will lie on the surface of insufficient quality, streaks, pimples and other defects are formed.
Do-it-yourself car painting
Do-it-yourself paint brushes are profitable, but you will have to work hard to build them. With a competent approach and a conscientious attitude to work, you will be able to independently build a car painting booth, which will help you avoid serious financial expenses and organize everything to your liking. Below we will look at how to make a paint booth with your own hands, and what steps are needed for this.\
First stage
Before you build a paint booth with your own hands, you need to imagine what it will look like and prepare everything you need. Draw a project on paper, where the future spray booth along with all the nodes will be shown on a scale:
- room;
- heat generator;
- heat gun;
- ventilation system.
These are the main points, each of which includes many smaller elements - doors, thermal insulation, lighting system, etc.
Spray booth room Let's talk about the room
Before you make a paint booth with your own hands, you are looking for suitable premises. It can be a metal garage or a large workshop - the main thing is that you have the space and the ability to equip everything accordingly.
A car painting booth must have walls that will meet a number of requirements:
- fire resistance;
- tightness;
- the ability to periodically wash;
- the presence of thermal insulation.
The last point is especially important when it comes to a garage with steel walls - you will have to make them double and put a layer of basalt wool or other refractory heat-insulating material.
The room must be airtight Be sure to pay attention to the floor - it must allow air to circulate freely. For this purpose, make a coating in the form of a multilayer lattice - in this way, normal air removal and inflow will be ensured from below.
Two doors - mandatory requirement fire safety. They should be easy to open to allow for emergency evacuation in the event of a fire, and sealed to prevent dust and debris from entering the room.
The dimensions of the chamber must be sufficient so that the master does not have obstacles for free movement during the work. A concrete or metal frame can be chosen as the basis. An exhaust mechanism with filters and valves is arranged under the floor surface. Think about the need for walkways to move.
Spray booth with water curtain on the doors Lighting is important
In the process of painting cars with your own hands, one of the very important roles room lighting plays. It is necessary that it be bright enough, comfortable for the eyes, and not give shadows and highlights.
Practice shows that the most convenient option will be fluorescent fluorescent lamps - they are placed on the ceiling. To ensure that the overview of the lower part of the machine is sufficient, several oblong light sources are hung along the walls.
Daylight fluorescent lamps Not less than effective solution lighting problems will become lamps powered by LEDs. Lighting of this type is becoming increasingly popular due to a number of advantages that LEDs have over other options:
- bright high-quality lighting;
- minimal energy consumption;
- low operating temperature;
- reliability;
- durability
Today, you can easily install LED lighting in the room - it will cost a little more, but the result is worth it.
Without providing high-quality lighting, you will not be able to fully control the painting process, which will negatively affect the final result of the work.
Proper lighting in the spray booth Room ventilation, air purification and drying
Do-it-yourself paint brushes are built taking into account all the requirements of painting technology and safety. key position well-arranged air ventilation takes place here. She is responsible for purifying the air, as well as ensuring that the mist of paint is properly deposited and removed.
Depending on which principle is used in the ventilation system of the room, two types of chambers are distinguished:
- with one motor
- with two motors.
In the first case, air is supplied into the room from above, and the fog settles down - the necessary pressure is applied to it. In the end, it is output through an individual channel arranged for this purpose. In the second case, one of the motors pumps air, the second sucks it out, taking it out of the chamber.
Paint booth ventilation The design will require high-performance ceiling air filters in order to exclude the possibility of foreign particles entering the painting area. For this purpose, it is recommended to choose air filters operating in two-phase mode - in the first phase, they remove large species pollution, in the second - small. At the same time, it is important to take into account that cleaning of both incoming and outgoing air flows is necessary. Bottom-mounted filters clog faster and need to be replaced much more frequently.
The installation of filters should provide for the possibility of turbulence in the air flow with enamel particles - for this you need to correctly position them around the perimeter of the room and take into account the air pressure.
After painting, the car will need to be dried - for this it is arranged special device. As drying, a heat generator is used, which operates on advantageous form fuel. Some use infrared heaters for this purpose. The main requirement for drying is a uniform heat supply to avoid overheating.
Supply and exhaust ventilation in the spray booth Some more useful information
In order to complete the interior decoration, use non-combustible materials - for example, metal. You should not choose an option such as lining, as the risk of fire increases. Depending on how correctly the finishing work is done, it will be possible to assess the degree of tightness, which is important to avoid the ingress of dust and foreign particles. Prefer smooth, easy-to-clean surfaces - this will simplify the cleaning process.
Think about the rooms where inventory, paints, professional equipment, safety equipment, overalls.
The work of painting a car simplifies the presence of automatic control process. This, of course, will affect the cost of the entire project, but, on the other hand, you will receive a number of invaluable advantages. The automatic control panel must have a panel made of durable, reliable material. It should be easy to use, ergonomic and comfortable. Think about the possibility of a quick transition between manual and automatic modes.
Conclusion
The construction of a specialized paint booth for a car is a laborious process that will require a lot of effort and energy. You will have to monitor information about existing options and come up with your own project based on them - you can take any ready-made solution as a basis.
The process of working on the implementation of the project is difficult, but interesting - here you can apply your creativity, imagination and ability to cope with difficulties.
A car painting booth is a small box in which a ventilation system, filters, thermal sensors and other elements are installed to ensure high-quality processing of large structures and small parts. Designing a spray booth takes a lot of time, and building it takes even more time.
Paint booth and conveyor assembly companies offer quality work at high prices, so it's cheaper to do it yourself. True, in this case it will take a lot of time, effort and patience.
Spray booths: design requirements
To create your own spray booth, you will need the following items:
- Garage or other small structure with solid walls and floors.
- Ready ventilation system.
- Filter system.
- Thermal generator.
- Wall upholstery material.
- Reinforcing grating for flooring.
Each element of the spray booth has individual properties that are mandatory for execution:
- The walls should be made of plastic lining or steel sheets that protect the room from fire and fire. The advantage of this material is easy cleaning that does not require special skills, tightness, environmental friendliness (lining does not emit toxic fumes even at a temperature of 50 degrees). The cavities between the walls should be filled with mineral wool or other insulating composition so that there are comfortable proper conditions indoors at any time of the year.
- The floor must provide good air circulation. To do this, its level must be raised by 15 cm and the grate must be fixed through which polluted air and dyes will flow. If the grate option does not suit you, you can organize trenches through which unhindered air exhaust will be carried out.
- The main and emergency doors must be finished with refractory material. The main entrance should be reinforced and sealed to prevent dust and dirt from entering the premises.
- The ventilation system is installed in such a way as to prevent the formation of "dead zones" - the lack of air exchange in some places, which causes paint dust to hang in the air and spoil the quality of product processing.
- The size of the spray booth should not be less than 4x6 m.
The principle of operation of the spray booth
In the spray booth, the main work cycle is to ensure good air circulation:
- air supply from the street to the chamber with pre-filtration;
- purification of air containing varnish and paint residues;
- release of recycled purified air into the external environment;
- heating of the incoming air to the specified parameters (20-30 degrees);
- drying of the painted product - continuous air circulation of the chamber and its heating up to 60 degrees.
Spray booths have a number of advantages over conventional spray booths. The professional unit is designed in such a way that uncleaned air from the street could not get inside the room in any way - this task is carried out by exhaust fans that drive air from the chamber in one direction.
To get air into the box, it must pass through the filter system. The supply fan draws in air and moves it in the same direction.
Under the box, you can use a room in which a heating system is not installed - it will be replaced by artificial material in the walls and a heat gun. And how to make a spray booth out of a garage?
In this case, it is desirable to make the floor of concrete or dense metal that is resistant to acids and solvents. If the floor is raised, access bridges must be attached to the garage entrance.
Building a spray booth
How to make a spray booth with your own hands, having in the arsenal standard set tools and a set of required installations? The process will be long and painstaking, but subject to all the rules and regulations, the result will be worthy.
Preparatory work in the construction of the spray booth requires the utmost care. First of all, the minimum dimensions of the garage should not be less than 4x6 m. Before installing all the boxing systems, it is necessary to finish the internal walls, floor, and conduct high-quality lighting around the entire perimeter of the chamber.
If we are talking about polymer painting, then a do-it-yourself powder painting booth will take even more time and cost, since you will also have to purchase a melting furnace.
Ventilation must be selected before preparatory work, since the methods of supplying and ejecting air are different, which means that their location will change.
The choice of material for the spray booth
Interior decoration has its own rules and features:
- Material - plastic lining or metal profile, non-woven anti-dust material is suitable for areas near which paints and varnishes are located.
- Boxing insulation - non-combustible insulation (mineral wool).
- The color of the walls and ceiling is strictly white. It improves color perception, and hence the quality of work. For such purposes, powder paints are used, which are characterized by better fire resistance and durability. Do-it-yourself powder chamber is possible if there is a special electrostatic spray gun that connects compressed air, or a compressor.
- The absence of any objects that collect dust and emit toxic fumes that have a fleecy coating. Even thin fabrics should not be present in the spray booth.
- It is obligatory to have a utility room in the chamber for operators-painters. All inventory is stored there. expendable materials and personal items. Due to the explosion hazard, the utility room is reinforced with a fire-resistant material with good tightness to prevent the formation of chemical reactions.
- Covering light sources with a transparent film reinforced with an adhesive base. The film completely protects fluorescent lamps from paint, vapors, which prevents the occurrence of a fire. It does not tear even after prolonged use and enhances the brightness of the light.
Wall and floor finishing
The walls and floor must be resistant to fire, so you need to immediately strengthen them with steel layers. On the floor, it is necessary to raise the level by 15-20 cm and cover with reinforcing bars. It will let air through, and retain drops of paint. An exhaust system must be installed in the opening between the base and the grate, through which the contaminated recycled air will be removed.
You can get by with an ordinary floor protected from paint and solvents, but then you will need to dig trenches.
“The ideal option would be two parallel trenches, connecting into one already at the exit from the chamber. They need to be covered with a dense grate to level the floor and at the same time protect against harmful chemicals.
The distance between the base and the grate should narrow in the direction where the recycled air is driven. Otherwise, air exchange will be impaired. A system of filters is also mounted in the floor, through which air masses will pass.
Here it is better to use a cardboard filter or fiberglass. It retains even small dirt particles well and is easy to operate. The service life of such filters is long, and replacement and disposal can be done by a non-professional.
Arrangement of the ventilation system
For small spray booths, single motor systems are suitable, which apply pressure on the paint mist and force it to settle into holes in the floor. For twin-engine ventilation systems, the principle of operation is to supply and blow air in the above-ceiling space of the chamber and a powerful exhaust of recycled air to the street.
The exhaust fan is located in the floor, and the supply fan is in the ceiling. How to build a spray booth with your own hands, taking into account all aspects of design?
If a large flow of cars is planned, it is better to install twin-engine systems. They circulate air, maintain the desired temperature. The cost of such ventilation is higher, but the guarantor and payback due to the supply of new cars that need high-quality painting are more significant.
It is better to install a fine air filter above the ceiling in the air box. The industrial fan itself is placed in a special housing, reminiscent of appearance snail. In it, air is injected and supplied to the chamber room.
The outlet and inlet of the ventilation must be positioned correctly to avoid the formation of "dead zones". Be sure to purchase a control panel with which you can adjust the power of the air flow. If there are blockages in the filters, using the control panel, you can solve this problem.
Lighting
How to make an excellent quality spray booth? With correct installation lighting fixtures good conditions for comfortable work are provided. It is advisable to install fluorescent lamps that improve visibility and have a long service life. Plus, they do not form glare and reflections, which is especially important when painting with mother-of-pearl.
The best lighting parameter is 800-1000 lux. To do this, you need to install lamps on the ceiling and side walls. To improve the visibility of the underside of the vehicle, long fluorescent lamps are required, located on the walls on the sides of the working area. How to make a spray booth yourself in compliance with all requirements?
It is important to ensure maneuverability for the operator-painter, unhindered access to any section of the box. No permits or technical skills are needed to construct the chamber. The main thing is to observe the basic design parameters and not to forget about safety.
Installation of heat generators that regulate the air temperature in the room and carry out high-quality safe drying of the painted product must be carried out strictly according to the instructions or with the advice of a specialist. An economical option is a generator that runs on gas and waste oil. The operation of such equipment is simple.
Safety
How to make a camera in which to work not only comfortably, but also safely? Only observing the rules for operating devices and systems:
- All heating elements must be protected with heat-resistant housings.
- Appliances powered by electricity must be grounded.
- The chamber must be insulated from non-combustible dense compositions.
- Fans, illuminators must be covered with dense explosion-proof material.
- Properly design the location of the supply and exhaust ventilation.
- A blower blowing air outward should be placed near a larger build-up of dyes and solvents.
The production of spray booths takes place gradually and takes a lot of time, but the result is worth it.