Unified tariff-qualification guide.(Fragments. The full version is located at the bottom of the page - for download).
Driver
Characteristics of works. Management of machines and mechanisms used in the performance of construction, installation and repair and construction works. Maintenance and preventive maintenance of machines and mechanisms referred to in §§ 100 - 105.
Must know: arrangement of machines (mechanisms), rules and instructions for their operation, maintenance and preventive maintenance; regulations traffic when working with cars on a motor vehicle; methods of performing work with the help of appropriate machines; technical requirements to the quality of work performed, materials and elements of structures; consumption rates of fuels and lubricants and electricity; plumbing in the amount provided for a construction locksmith, but one level below the level of a machinist.
§ 100. Machinist
3rd category
Mobile concrete mixers with batch volume up to 425 l. Elevators construction cargo (mast, rack-mount, mine). Mortar pumps.
Mobile mortar mixers with batch volume up to 325 l. Electric winches.
Electric welding mobile units with an internal combustion engine with a power of up to 37 kW (50 hp).
§ 101. Machinist
4th category
Aerial platforms and auto-hydraulic lifts with a lifting height of up to 15 m.
Autocompressors with a productivity up to 3 m3/min.
High pressure airless sprayers.
Bar installations on tractors with engines up to 43 kW (60 hp).
Concrete pumping plants with capacity up to 20 m3/h.
Mobile concrete mixers with a batch capacity of more than 425 to 1200 liters.
Mobile compressors with a productivity up to 10 m3/min.
Truck cranes with lifting capacity up to 6.3 tons.
Ice cutting machines.
Painting stations are mobile.
Machines for isolation of gas and oil pipelines (in stationary conditions).
Elevators are construction (cargo-passenger).
Mobile mortar mixers with a mixing capacity of more than 325 to 750 liters.
Mobile pipe bending machines for bending pipes with a diameter of up to 1200 mm.
Plaster stations are mobile.
Electric welding mobile units with an internal combustion engine with a power of over 37 kW (50 hp) up to 73 kW (100 hp).
Mobile power plants with an engine power up to 37 kW (50 hp).
§ 102. Driver
5th category
Truck-mounted concrete pumps with capacity up to 40 m3/h.
Aerial platforms and auto-hydraulic lifts with a lifting height of over 15 to 25 m.
Autocompressors with a productivity over 3 m3/min.
Yamoburs.
Bar installations on tractors with an engine power over 43 kW (60 hp) up to 73 kW (100 hp). Concrete pumping plants with a capacity of over 20 m3/h. Mobile concrete mixers with a batch capacity of over 1200 to 2400 liters. Vacuum installations. Self-propelled hydraulic seeders. Drainage machines. Air compressors for divers. Mobile compressors with a capacity of over 10 to 50 m3/min. Automobile cranes with a lifting capacity of over 6.3 to 10 tons. Machines for insulating gas and oil pipelines with a diameter of up to 800 mm (in highway conditions).
Mechanized tensioning devices for the manufacture of stress-reinforced structures. Mechanized equipment for lifting mobile (sliding) formwork. Mobile pipe bending machines for bending pipes with a diameter of more than 1200 mm. Pipe cleaning machines with engine power up to 73 kW (100hp).
Pipelayers with engines up to 73 kW (100 hp). Sealing and planning-sealing machines. Mobile automated continuous cooking plants concrete mixtures with a productivity up to 60 m3/h.
Electric welding mobile units with an internal combustion engine with a power of over 73 kW (100 hp) up to 110 kW (150 hp).
Mobile power plants with an engine power of over 37 kW (50 hp) up to 110 kW (150 hp).
§ 103. Driver
6th category
Truck-mounted concrete pumps with a capacity of over 40 to 60 m3/h.
Aerial platforms and auto-hydraulic lifts with a lifting height of over 25 to 35 m.
Bar installations on tractors with an engine power over 73 kW (100 hp).
Earth-moving and milling self-propelled machines.
Mobile compressors with a capacity of over 50 to 70 m3/min.
Contact welding installations mobile for welding of the main gas-oil pipelines. Automobile cranes with a lifting capacity of over 10 to 20 tons. Machines for insulating gas and oil pipelines with a diameter of over 800 mm to 1000 mm (in highway conditions).
Pipelayers with engine power over 73 kW (100 hp) up to 100 kW (140 hp).
Mobile automated continuous installations for the preparation of concrete mixtures with a capacity of over 60 to 80 m3/h. Installations for punching and horizontal drilling of soil when laying pipelines with a drilling diameter of up to 500 mm. Electric welding mobile units with internal combustion engines with a power of over 110 kW (150 hp).
Mobile power plants with engines with a power of over 110 kW (150 hp) up to 175 kW (240 hp).
§ 104. Driver
7th rank
Truck-mounted concrete pumps with a capacity of over 60 to 180 m3/h.
Aerial platforms and auto-hydraulic lifts with a lifting height of over 35 m.
Mobile compressors with a capacity of over 70 m3/min.
Truck cranes with a lifting capacity of over 20 to 40 tons.
Machines for insulating gas and oil pipelines with a diameter of more than 1000 to 1200 mm (in highway conditions).
Planners (type UDS-100, UDS-114) on the chassis of a car for digging trenches when constructing structures using the "wall in the ground" methods with a depth of 20 to 40 m.
Installations for punching and horizontal drilling of soil when laying pipelines with a drilling diameter of more than 500 mm to 1000 mm.
Pipelayers with engine power over 100 kW (140 hp) up to 145 kW (200 hp).
Mobile power plants with an engine power of over 175 kW (240 hp).
Average required professional education.
§ 105. Machinist
8th rank
Truck-mounted concrete pumps with a capacity of over 180 m3/h.
Truck cranes with a lifting capacity of over 40 to 60 tons.
Machines for insulating gas and oil pipelines with a diameter of more than 1200 mm.
Planners (type UDS-110, UDS-114) on the chassis of a car for digging trenches when constructing structures using the "wall in the ground" methods with a depth of over 40 m.
Pipelayers with engine power over 145 kW (200 hp) up to 220 kW (300 hp).
Mobile automated continuous installations for the preparation of concrete mixtures with a capacity of over 120 m3/h.
Installations for punching and horizontal drilling of soil when laying pipelines with a drilling diameter of more than 1000 mm.
Mobile power plants, included in the complex of machines "Sever".
Requires secondary vocational education.
Note. Truck crane operators operating cranes with tower-jib equipment (ABKS type) are charged one category higher with the same crane capacity.
Bulldozer driver
Characteristics of works. Performance of work by bulldozers with engines, the power of which is specified in §§ 106 - 110. Development, movement of soil and planning of areas when arranging cuts, embankments, reserves, cavaliers and banquets during the construction of automobile and railways, irrigation and navigable canals, dams, protective earth dams, pits for buildings and structures, power transmission line supports and contact networks and other similar structures. Carrying out emergency and restoration work on railway transport. Performing work under water with a bulldozer.
Must know: device, principle of operation and specifications tractors and attachments; methods of installation and dismantling of attachments; causes of malfunctions and ways to eliminate them; rules for the development and movement of soils various categories at different depth of development; rules for layer-by-layer filling of embankments - rules for developing excavations, filling embankments and planning areas according to specified profiles and marks.
§ 106. Bulldozer driver
4th category
Bulldozers with engines up to 43 kW (60 hp).
§ 107. Bulldozer driver
5th category
Bulldozers with engine power over 43 kW (60 hp) up to 73 kW (100 hp).
§ 108. Bulldozer driver
6th category
Bulldozers with engine power over 73 kW (100 hp) up to 150 kW (200 hp). Requires secondary vocational education.
§ 109. Bulldozer driver
7th rank
Bulldozers with engine power over 150 kW (200 hp) up to 280 kW (380 hp). Requires secondary vocational education.
§ 110. Bulldozer driver
8th rank
Bulldozers with engines over 280 kW (380 hp). Requires secondary vocational education.
Excavator driver
Characteristics of works. Performance of work by single-bucket excavators with a bucket and bucket-wheel excavators, the capacity and productivity of which are specified in §§ 115 - 119. Excavation for the construction of excavations, embankments, reserves, cavaliers and banquets during construction highways, irrigation and navigable canals, dams, protective earth dams. Development of pits for buildings and structures, during the construction of supports for power lines and contact networks. Digging trenches for underground utilities, drainage ditches, upland and banquet ditches and other similar structures.
Must know: device, principle of operation and technical characteristics of excavators; the principle of operation of mechanical, hydraulic and electrical equipment; rules for the installation and dismantling of excavator attachments; causes of malfunctions and ways to eliminate them; rules for the development of soils of various categories at different depths of the face; soil development rules in compliance with specified profiles and elevations.
§ 115. Excavator driver
4th category
Single-bucket excavators with bucket capacity up to 0.15 m3.
§ 116. Excavator driver
5th category
Single bucket excavators with a bucket capacity of over 0.15 m3 to 0.4 m3.
Bucket-wheel excavators (ditchers and trenchers) with a capacity of up to 1000 m3/h.
§ 117. Excavator driver
6th category
Single-bucket excavators with bucket capacity over 0.4 m3 up to 1.25 m3.
Bucket-wheel excavators (ditchers and trenchers) with a capacity of over 1000 m3/h up to 2500 m3/h.
§ 118. Excavator driver
7th rank
Single bucket excavators with a bucket capacity of over 1.25 m3 to 4 m3.
Bucket wheel excavators with capacity over 2500 m3/h up to 4500 m3/h.
§119. Excavator driver
8th rank
Single bucket excavators with a bucket capacity of over 4 m3 to 9 m3.
Bucket wheel excavators with a capacity of over 4500 m3/h.
Requires secondary vocational education.
Engineer of machines for the construction of foundations and coatings of roads and airfields
Control of machines of various types and purposes specified in §§ 120 - 124, used in the construction and repair of the superstructure of highways and the construction of airfields. Maintenance of the machine, checking the health of its systems and components. Troubleshooting and troubleshooting of the machine. Participation in scheduled preventive maintenance. Refueling with fuels and lubricants.
Must know: the purpose and arrangement of serviced machines, the rules and instructions for their operation; methods of work performance and technical requirements for their quality; fuel and lubricant consumption rates; grades and properties of oils and fuels, their technological characteristics, safe storage rules; Traffic Laws.
§ 120. Driver
4th category
Graders trailed with a knife up to 3000 mm long (without extension).
Self-propelled rollers with smooth rollers (static and vibrating) weighing up to 5 tons.
Machines for the device of seams when performing road works (in freshly laid concrete).
Cement spreaders (gravity trailed).
Chip spreaders (with mechanical control system).
§ 121. Machinist
5th category
Autoconcrete breakers.
Motor graders with engines up to 59 kW (80 hp).
Asphalt distributors.
Graders trailed with a knife length over 3000 mm (without extension).
Seam fillers.
Self-propelled rollers with smooth rollers (static and vibratory) weighing over 5 to 10 tons. Machines for applying film-forming liquid. Machines for the installation of reinforcement strips. Seam cutters are self-propelled. Cement distributors (aeration self-propelled).
Finishers.
Chip spreaders (with hydrostatic control system).
§ 122. Driver
6th category
Motor graders with engine power over 59 kW (80 HP) up to 100 kW (135 HP).
Concrete pavers.
Bitumen-smelting mobile installations.
Grader-elevators.
Rollers self-propelled and semi-trailed on pneumatic tires.
Self-propelled rollers with smooth rollers (static and vibrating) weighing over 10 tons.
Machines for laying road curbs.
Machines for the device of protective rough layers of road surfaces with a capacity of up to 300 m2 / h. Profilers with motors up to 125 kW (170 hp). Mobile asphalt mixers with capacity up to 25 t/h. Asphalt pavers with a capacity of up to 100 t/h. Mobile units for sorting and preparation of mineral materials for the device
protective coating layers. Road cutters with engine power up to 120 kW (160 hp). Requires secondary vocational education.
§ 123. Driver
7th rank
Motor graders with engine power over 100 kW (135 hp) up to 150 kW (200 hp).
Concrete pavers (on rail forms).
Machines for the installation of protective rough layers of road surfaces with a capacity of over 300 m2/h to 400 m2/h. Road milling cutters with engine power over 120 kW (160 hp) up to 150 kW (200 hp). Profilers (on railforms). Remixers with motors up to 75 kW (100 hp). Mobile asphalt mixers with a capacity of over 25 t/h up to 50 t/h. Asphalt pavers with a capacity of over 100 to 400 t/h. Requires secondary vocational education.
§ 124. Driver
8th rank
Motor graders with engine power over 150 kW (200 HP) up to 180 kW (240 HP).
Concrete pavers with a productivity of 180m3/h.
Machines for the installation of protective rough layers of road surfaces with a capacity of over 400 m2/h to 500 m2/h. A mobile complex equipped with units for the preparation of mortars and cement concrete mixtures. Profilers with 125 kW (170 hp) motor. Remixers with engine power over 75 kW (100 HP) up to 135 kW (180 HP). Recyclers are cold. Mobile asphalt mixers with a capacity of over 50 t/h to 100 t/h. Asphalt pavers with a capacity of over 400 t/h. Road cutters with an engine power of over 150 kW (200 hp). Chip spreaders (with electronic system management). Requires secondary vocational education.
The issue is approved by the Decree of the Ministry of Labor and social development Russian Federation dated 11/14/2000 N 81
lift operator
§ 11. Lift driver
Job Description. Maintenance of the lift (unit) in the course of work on capital, current repairs and testing (testing) of wells. Preparation of the lift (unit) for work. Participation in the preparatory and final work, installation and dismantling of the lift, in the tooling of the traveling system, in the installation and maintenance of auxiliary mechanisms used in the workover of wells (pump unit, machine and hydraulic tongs, preventer hydraulic lines and other equipment from the hydraulic system of the installation). Winch control for all round trip operations. Control of a power generator installed on a lift (unit). Participation in the work on the overhaul and underground workover of wells, in the work on testing and equipment of the wellhead. Monitoring the correct operation of the registrar and the mechanisms of the lift (unit). Keeping a log of the operation of the lift (unit). Driving a car or tractor, fueling them. Production current repair mechanisms of the lift (unit), car, tractor. Maintenance of mobile power plants up to 100 kW.
Must know: technological process extraction of oil, gas and other minerals; well design; technological process and types of work on testing wells; technical characteristics and operating rules of the tractor-lift, mobile unit, used mechanisms, devices, traveling systems; technological process and types of capital, current repairs, well testing methods; brands and grades of fuels and lubricants; fundamentals of electrical engineering and plumbing in the scope of work performed; ways to repair the engine, transmission and running gear of lifting winches.
During underground and major repairs at wells of the 1st category of complexity and sampling (testing) of wells up to 1500 m deep inclusive - 5th category;
during underground and major repairs at wells of the II category of complexity and testing (testing) of wells with a depth of more than 1500 m, directional wells, regardless of their depth and wells with complicated geological conditions - 6th category;
during underground and overhaul repairs made from lifting installations with a carrying capacity of 80 tons and more - 7th category.
Requires secondary vocational education.
profession descriptionProfession Aerial platform and hydraulic lift operator In Ekaterinburg. Where can I learn to be an aerial platform and aerial platform operator in Yekaterinburg. In Yekaterinburg, the profession of an aerial platform and aerial platform operator can be obtained at colleges and technical schools in Yekaterinburg, as well as at training centers and centers vocational training.
Courses for aerial platform and aerial platform operator Yekaterinburg, training for an aerial platform operator in Yekaterinburg
Professional standard Aerial platform and hydraulic lift operator reg number under development
Description of the profession
Training Aerial platform and hydraulic lift operator Ekaterinburg, courses Aerial platform and hydraulic lift operator in Yekaterinburg
I II Excerpts from ETKS issue 3
Aerial platform and hydraulic lift operator
Characteristics of works. Management of machines and mechanisms used in the performance of construction, installation and repair and construction works. Maintenance and preventive maintenance of machines and mechanisms referred to in § § 100 - 105.
Must know: arrangement of machines (mechanisms), rules and instructions for their operation, maintenance and preventive maintenance; rules of the road when working with cars on a motor vehicle; methods of performing work with the help of appropriate machines; technical requirements for the quality of work performed, materials and elements of structures; consumption rates of fuels and lubricants and electricity; plumbing in the amount provided for a construction locksmith, but one level below the level of a machinist.
§ 100. Machinist of the 3rd category
Mobile concrete mixers with batch volume up to 425 l.
Elevators construction cargo (mast, rack-mount, mine).
Mobile mortar mixers with batch volume up to 325 l.
Electric winches.
Electric welding mobile units with an internal combustion engine with a power of up to 37 kW (50 hp).
§ 101. Machinist of the 4th category
Aerial platforms and auto-hydraulic lifts with a lifting height of up to 15 m.
Autocompressors with a productivity up to 3 m3/min.
Concrete pumping plants with capacity up to 20 m3/h.
Mobile concrete mixers with a batch capacity of more than 425 to 1200 liters.
Mobile compressors with a productivity up to 10 m3/min.
Truck cranes with lifting capacity up to 6.3 tons.
Ice cutting machines.
Mobile power stations with engines up to 37 kW (50 hp).
§ 102. Machinist of the 5th category
Truck-mounted concrete pumps with capacity up to 40 m3/h.
Aerial platforms and auto-hydraulic lifts with a lifting height of over 15 to 25 m.
Autocompressors with a productivity over 3 m3/min.
Concrete pumping plants with a capacity of over 20 m3/h.
Mobile compressors with a capacity of over 10 to 50 m3/min.
Truck cranes with a lifting capacity of more than 6.3 to 10 tons.
Electric welding mobile units with an internal combustion engine with a power of over 73 kW (100 hp) up to 110 kW (150 hp).
Mobile power plants with an engine power of over 37 kW (50 hp) up to 110 kW (150 hp).
§ 103. Machinist of the 6th category
Truck-mounted concrete pumps with a capacity of over 40 to 60 m3/h.
Aerial platforms and auto-hydraulic lifts with a lifting height of over 25 to 35 m.
Truck cranes with a lifting capacity of more than 10 to 20 tons.
Mobile power plants with engines with a power of over 110 kW (150 hp) up to 175 kW (240 hp).
§ 104. Machinist of the 7th category
Truck-mounted concrete pumps with a capacity of over 60 to 180 m3/h.
Aerial platforms and auto-hydraulic lifts with a lifting height of over 35 m.
Mobile compressors with a capacity of over 70 m3/min.
Truck cranes with a lifting capacity of over 20 to 40 tons.
Requires secondary vocational education.
§ 105. Machinist of the 8th category
Truck-mounted concrete pumps with a capacity of over 180 m3/h.
Truck cranes with a lifting capacity of over 40 to 60 tons.
Requires secondary vocational education.
Content of labor:
manages car lifts and aerial platforms installed on the chassis of the car, ensures stability, lifts the working platform, lowers and lays it in a transportable position, repairs and installs power and communication lines, the trolleybus contact network; cleans and paints buildings and structures, performs other work at height; performs preventive maintenance.
Must know:
ways to work at height Maintenance car lifts and towers, safety regulations, traffic rules, plumbing.
Professionally important qualities:
accurate eye gauge;
attentiveness;
accuracy;
stability of the vestibular apparatus;
physical health;
emotional stability;
good reaction.
Qualification requirements:
educational institutions of primary vocational education, course preparation.
Medical contraindications:
poor eyesight;
Fear of heights;
violation of the functions of the musculoskeletal and vestibular apparatus;
cardiovascular diseases;
nervous and mental diseases.
I approve
[position, signature, full name
manager or other
An official authorized
Approve
[legal form, job description]
organization name, [day, month, year]
enterprises] M. P.
Job description
5th category auto-hydraulic lift driver [name of organization]
This job description has been developed and approved in accordance with the provisions Labor Code of the Russian Federation, Order of the Ministry of Health and Social Development of the Russian Federation of April 6, 2007 N 243 "On Approval of the Unified Tariff and Qualification Directory of Works and Professions of Workers, Issue 3, Section "Construction, Installation and Repair and Construction Works" (as amended and supplemented ) and other regulatory legal acts regulating labor relations.
1. General Provisions
1.1. A grade 5 auto-hydraulic lift driver [name of organization] belongs to the category of workers, is hired and dismissed by order of the head of [name of organization].
1.2. For the position of an auto-hydraulic lift driver of the 5th category, a person is accepted who has the appropriate certificates of qualification, who has undergone appropriate training, who has the rights of category B, C, and is recognized as fit medical commission for this work, trained in safe methods and techniques of work, briefings on labor safety.
1.3. The driver of the auto-hydraulic lift of the 5th category is directly subordinate to [fill in the correct one].
1.4. The driver of the 5th category auto-hydraulic lift must know:
The device of an auto-hydraulic lift with a lifting height of up to 25 m (mechanisms), rules and instructions for their operation, maintenance and preventive maintenance;
Knowledge of the technical device of an automobile crane;
Rules of the road when working with cars on a motor vehicle;
Methods for performing work with the help of appropriate machines;
Technical requirements for the quality of work performed, materials and elements of structures;
Norms of consumption of fuels and lubricants and electricity;
Plumbing in the scope provided for a construction locksmith, but one rank below the level of a machinist;
Basics of labor legislation;
Rules and norms of labor protection and safety;
Internal labor regulations.
1.5. The mode of operation of the driver of the 5th category auto-hydraulic lift is regulated by the internal regulations [fill in as necessary].
2. Job responsibilities
2.1. The following duties are assigned to the driver of an auto-hydraulic lift of the 5th category:
2.1.1. Control of an auto-hydraulic lift with a lifting height of up to 25 m and its mechanisms used in the performance of construction, installation and repair and construction works.
2.1.2. Hoist control for lifting goods and personnel.
2.1.3. Maintenance and preventive maintenance of a hydraulic lift with a lifting height of up to 25 m and its mechanisms.
2.1.4. Daily inspection of assigned equipment.
3. Rights
3.1. The driver of the auto-hydraulic lift of the 5th category has the right:
3.1.1. For all social guarantees provided for by law.
3.1.2. Request personally or on behalf of the immediate supervisor documents, materials, tools and other necessary to fulfill their official duties.
3.1.3. Pass in in due course certification with the right to receive the appropriate qualification category.
3.1.4. Demand assistance from management in the performance of their duties and rights.
3.1.5. Make decisions within your competence.
3.1.6. To propose to the head of the proposal to improve the work related to his activities.
3.1.7. Report to the manager about all identified violations and shortcomings related to the work performed.
3.1.8. Demand the creation of labor protection conditions that comply with current legislation.
3.1.9. Improve your skills.
4. Responsibility
4.1. The driver of the 5th category auto-hydraulic lift is responsible for:
Failure to perform (improper performance) of their official duties under this job description, within the limits specified labor law Russian Federation;
Retraining, advanced training of aerial platforms and hydraulic lift operators with the assignment of a qualification category.
Group lessons or individual consultations. Training is conducted both on the basis of an educational institution and on the basis of a customer organization in any region of Belarus.
Workers with a category in this profession (3-7 category) can undergo advanced training.
Documents are issued upon completion of training. state standard: certificate of assignment of a qualification category by profession.
ETCS
ENGINEER (GENERAL CONSTRUCTION MACHINES)
Characteristics of works. Management of machines and mechanisms of various types and purposes in the performance of construction, installation and repair and construction works. Refueling vehicles with fuels and lubricants. Regulation of the working mechanisms of machines for a given mode of operation. Maintenance of machines and mechanisms. Identification and elimination of malfunctions in their work. Preventive maintenance and participation in other types of repair of serviced equipment.
Shall know: device and technical characteristics of serviced machines and mechanisms; rules and instructions for their operation, maintenance and current repairs; rules of the road when working with cars on a motor vehicle; installed alarm; rules for the production of works; consumption rates of fuels and lubricants and electricity; schemes and frequency of lubrication of machine and mechanism units; technical requirements for the quality of work performed; plumbing in the amount provided for a construction locksmith, charged per category below the driver.
When driving cars:
3rd category
1. Means of small-scale mechanization: mobile concrete mixers with a batch volume of up to 425 l, mast, rack and shaft lifts, mortar pumps, mobile mortar mixers with a batch volume of up to 325 l, electric winches.
2. Electric welding mobile units with an internal combustion engine with a power of up to 37 kW (up to 50 hp).
4th category
1. Aerial platforms and auto-hydraulic lifts with a lifting height of up to 15 m.
2. Autocompressors with a capacity of up to 3 cubic meters / min.
3. High pressure airless sprayers.
4. Mobile compressors with a capacity of up to 10 cubic meters / min.
5. Truck cranes with lifting capacity up to 6.3 tons (exclusively).
6. Machines for the isolation of gas and oil pipelines in stationary conditions.
7. Means of small-scale mechanization: concrete pumping plants with a capacity of up to 20 cubic meters per hour, mobile concrete mixers with a batch volume of more than 425 to 1200 liters, mobile painting and plastering stations, cargo-passenger lifts, mobile mortar mixers with a batch volume of more than 325 to 750 liters.
8. Mobile pipe bending machines for bending pipes with a diameter of up to 1200 mm.
9. High and low pressure installations - bar installations on tractors up to 43 kW (up to 60 hp).
10. Electric welding mobile units with an internal combustion engine with a power of 37 to 73 kW (50 to 100 hp).
11. Mobile power stations with engines up to 37 kW (up to 50 hp).
5th category
1. Truck-mounted concrete pumps with a capacity of up to 40 cubic meters per hour.
2. Aerial platforms and auto-hydraulic lifts with a lifting height of over 15 to 25 m.
3. Asphalt distributors.
4. Autocompressors with a capacity of more than 3 cubic meters / min.
5. Drilling and drilling-crane self-propelled machines with a drilling depth of up to 6 m; dredgers.
6. Self-propelled hydraulic seeders.
7. Earthmoving and milling machines - drainage machines.
8. Compressors for supplying air to divers.
9. Mobile compressors with a capacity of more than 10 to 50 cubic meters / min.
11. Truck cranes with lifting capacity from 6.3 to 10 tons (exclusively).
12. Machines for isolation of oil and gas pipelines with a diameter of up to 800 mm (exclusively).
13. Mechanized tensioning devices for the manufacture of stress-reinforced structures.
14. Mechanized equipment for lifting mobile (sliding) formwork.
15. Means of small-scale mechanization: concrete pumping plants with a capacity of more than 20 cubic meters / h, mobile concrete mixers with a batch volume of more than 1200 to 2400 liters.
16. Mobile pipe bending machines for bending pipes with a diameter of more than 1200 mm.
17. Pipe cleaning machines with an engine power up to 73 kW (up to 100 hp).
18. Pipelayers with engines up to 73 kW (up to 100 hp).
19. Compacting and planning-compacting machines.
20. High and low pressure installations: bar installations on tractors with a power of over 43 to 73 kW (over 60 to 100 hp), vacuum installations.
21. Mobile automated continuous installations for the preparation of concrete mixtures with a capacity of up to 60 cubic meters per hour.
22. Electric welding mobile units with an internal combustion engine with a power of over 73 to 110 kW (over 100 to 150 hp).
23. Mobile power plants with an engine power of over 37 to 110 kW (over 50 to 150 hp).
6th category
1. Concrete pumps with a capacity of over 40 to 60 cubic meters / h.
2. Aerial platforms and auto-hydraulic lifts with a lifting height of over 25 to 35 m.
3. Bitumen-smelting mobile units.
4. Drilling and drilling-crane self-propelled machines with a drilling depth of more than 6 m.
5. Earth-moving and milling self-propelled machines.
6. Mobile compressors with a capacity of more than 50 to 70 cubic meters / min.
7. Contact-welding mobile installations for welding main gas and oil pipelines.
9. Truck cranes with lifting capacity from 10 to 20 tons.
10. Machines for isolation of gas and oil pipelines with a diameter of 800 to 1000 mm (exclusively) in the field conditions.
11. Pipe cleaning machines with an engine power of over 73 kW (over 100 hp).
12. Pipelayers with engine power over 73 to 100 kW (over 100 to 140 hp).
13. High and low pressure installations (bar installations on tractors with a power of over 73 kW (over 100 hp).
14. Mobile automated continuous installations for the preparation of concrete mixtures with a capacity of up to 80 cubic meters / h.
15. Installations for punching and horizontal drilling of soil when laying pipelines with a drilling diameter of up to 500 mm.
16. Electric welding mobile units with an internal combustion engine with a power of over 110 kW (over 150 hp).
17 Mobile power plants with an engine power of over 110 to 175 kW (over 150 to 240 hp).
7th rank
1. Truck-mounted concrete pumps with a capacity of over 60 to 180 cubic meters per hour.
2. Aerial platforms and auto-hydraulic lifts with a lifting height of over 35 m.
3. Drilling and drilling-crane self-propelled machines with an engine power of 100 - 180 hp. with drilling diameter over 400 to 1200 mm.
4. Mobile compressors with a capacity of over 70 cubic meters / min.
6. Truck cranes with a lifting capacity of over 20 to 40 tons.
7. Machines for isolation of gas and oil products pipelines with a diameter of 1000 to 1200 mm (exclusively) in the field conditions.
8. Pipelayers with engine power over 100 to 145 kW (over 140 to 200 hp).
9. Mobile automated continuous installations for the preparation of concrete and soil mixtures in near-road quarries with a capacity of 80 to 120 cubic meters per hour (exclusively).
10. Installations for punching and horizontal drilling of soil when laying pipelines with a drilling diameter of 500 to 1000 mm.
11. Mobile power plants with an engine power of over 175 kW (over 240 hp).
8th rank
1. Concrete pumps with a capacity of over 180 cubic meters / h.
2. Truck cranes with a lifting capacity of over 40 to 60 tons.
3. Machines for isolation of gas and oil products pipelines with a diameter of 1200 mm or more in the field conditions.
4. Pipelayers with engine power over 145 to 220 kW (over 200 to 300 hp) (exclusively).
5. Mobile automated continuous installations for the preparation of concrete mixtures with a capacity of 120 cubic meters per hour or more.
6. Installations for punching and horizontal drilling of soil when laying pipelines with a drilling diameter of more than 1000 mm.
Secondary special (professional) education is required for assignment of 7th - 8th categories.
Note. Drivers of automobile cranes with tower-boom equipment of the ABKS type are charged one category higher with the same lifting capacity of the crane.