Correct setting of the megaphone modem. How to set up an mts modem How to set up a 3g modem on windows

It seems to have inserted a modem and that's it - use it, as the manufacturers write, but there are also subtleties (settings). Let's look at some of them.

Here is the standard 3G modem window from Megafon:

Go to "settings" and switch from NDIS to RAS (modem):

and disable in "Network Connections" - broadband adapter mobile communications .

I'll explain right away. NDIS ( Network Driver Interface Specification) is a network driver interface specification. Designed for mobile broadband and is used for example: in a WiFi router. Let's say you have a laptop, a smartphone, and a netbook. you paste in wifi router 3G modem and there is a distribution to everyone a little. That's what NDIS is for.

If you are alone on the modem, then it is advisable to switch to RAS, which will significantly affect the speed of the Internet .

In general, I personally do not use this program. I prefer .

It also allows you to switch network modes. Traffic tracking.

Internet connection directly from the program.

There is also a program for managing any 3G modem. ( Modem setup on NDIS and RAS is also available)

With this program, you can send and receive SMS, and the best part is making calls via modem directly from your computer:

A microphone is required.

OS: Windows XP, VISTA, 7
Language: Russian, English
Modem: HUAWEI E150, E156, E160, E173, E220, E1550, E1750. Download (letitbit).

Regardless of which 3G modem you have, setting it up and establishing a connection is divided into two stages. First step - installation software for a modem to your laptop or computer. So - before buying a 3G modem, make sure that it works with your operating system. The second stage is setting up the Internet connection itself through this modem - "pick up a 3G modem".

For convenience, we have written instructions for setting up the modem for each operating system separately, and also made a table with settings for 3G operators. When setting up a 3G modem connection, take the data from the table!

Operator	Call number (dial)	Login	Password
Intertelecom	#777
PEOPLEnet	#777	8092ХХХХХХХ@people.net.ua Where X is your phone number	000000
Ukrtelecom (TriMob, UTEL)	*99#	utel	1111
Kyivstar	*99#	Leave blank	Leave blank
Lifecell	*99#	Leave blank	Leave blank
Vodafone	*99#	Leave blank	Leave blank
MTS Ukraine	*99#	Leave blank	Leave blank
MTS Connect	#777	mobile	internet

Setting up a 3G modem on Windows XP

Restart your computer
Go to the "START" menu - connection (right-click) - open - create a new connection
New Connection Wizard
Connect to the Internet
Establishing a connection manually
Through a regular modem
Service Provider Name - At your discretion, this item does not affect anything
Phone number (or dial-up number) - take from the table
Password - take from the table
Password confirmation - take from the table
Put a tick in the item "add a connection shortcut to the desktop" - so as not to search in the network environment

Ready! In the future, to connect the 3G modem to the Internet, we use this type of connection. It can be found on the desktop (if added) or in the network environment settings.

Setting up a 3G modem on Windows Vista

Install from the driver disk (software) under the modem
Restart your computer
After rebooting, install the modem into the USB port of the computer
Go to the "START" menu - control panel - click the home page - Networks and Internet - Connect to the Internet
Check the box "No, create a new connection"
Select "Switched"
Specify the modem (put a tick on it), if there is only one modem, then the system will select it
Username - take from the table
Password - take from the table
To plug

In the connection itself, go to the "Properties" tab, check whether our modem is selected, if not, check the box next to the desired device. Click "Setup", select the highest speed - 921600 Bit / sec. and put a tick only on "Hardware flow control". Then "OK", "OK" and "Call" - the process of connecting to the Internet will begin.

Setting up a 3G modem on Windows 7

Install from the driver disk (software) under the modem
Restart your computer
After rebooting, install the modem into the USB port of the computer
Go to the "START" menu - Control Panel - Network and Control Center and public access– Setting up a new connection
Setting up a telephone connection
We select our modem from the list, if there is only one modem, then the system will select it
Dialed number - take from the table
Username - take from the table
Password - take from the table
Connection name - At your discretion, this item does not affect anything
Click "Connect"
You can skip the process of checking Internet access by clicking on - "Establish this connection anyway". (This connection has been added to the list of connections)

Ready! In the future, to connect the 3G modem to the Internet, we use this type of connection. It can be found on the network access panel (bottom right, near the time) or in the network environment settings.

Setting up a 3G modem on Windows 8

Install from the driver disk (software) under the modem
Restart your computer
After rebooting, install the modem into the USB port of the computer
Go to the "Start" menu - Control Panel - Network and Sharing Center - Create and configure a new connection or network
Internet connection
Dial-up connection
We select our modem from the list, if there is only one modem, then the system will select it
Dialed number - take from the table
Username - take from the table
Password - take from the table
Connection name - At your discretion, this item does not affect anything
Click "Connect"
You can skip the process of checking Internet access by clicking on - "Establish this connection anyway". (This connection has been added to the list of connections)

Buy 3G modem you can on our website in the section "3G MODEMS"

3G modems are usually bought because there is no way to connect to a normal wired high speed internet, or you need to constantly access the Internet from a laptop in places where there is free WiFi internet is simply not available. Actually, because of what everyone dislikes 3G Internet so much - this is a high cost, poor quality of communication, and a very low speed of downloading files and loading pages. Now we will consider several ways: how you can increase the speed of 3G Internet at no particular cost.

During operation, each computer creates a magnetic field around itself and all kinds of radio interference, the modem is located just in this field of interference, we can’t remove the interference, but moving the modem away is easy. To do this, we need a regular USB extension cable, you can find it in any computer store, the cost is no more than a hundred rubles, more than 1.5 meters long (more than 3 meters is not recommended, otherwise the computer may simply not see the modem). We connect the modem through the cord to your PC. Usually, after this operation, the signal quality increases many times over, and surfing the Internet at 3G speeds becomes more enjoyable.

The second method, no less effective, is to extend the antenna of the wireless modem, some manufacturers take care of their customers by making a separate output for the amplified antenna in the case of the 3G modem itself. But there are models, usually they are old, in which there is no such output, and in order to extend the antenna, you will need to disassemble the device case. To do this, you will need at least some knowledge in the field of electronics and physics, an unknowing person will only harm the device, and its further operation will not be possible. So read a few instructions before getting into the insides of a 3G modem.

The third method is intended for well-advanced computer users, the method is as follows, on each operating system of the Windows line there is such an MTU setting, it is responsible for the block size in the received packet, in this setting it is possible to set numbers from 256 to 4096, when setting arbitrary numbers measure top speed your internet connection. With the right settings, the signal quality can increase several times. In addition to manually setting the MTU parameter, there is auto tuning, achieved through the use of , easy to find using any search engine.

The fourth method is used extremely rarely and usually very expensive, the point is to flash the modem, unlock its insides, in other words, the modem will work with SIM cards of any operator. You never know which operator in which area provides better Internet, so by unlocking you will have a chance to compare the speeds of different operators cellular communication. For most devices, there is special software for such an operation; an experienced user of a personal computer can manually configure the modem for another operator. The costs are only in buying a new SIM card and connecting it to the appropriate tariff.

The fifth way is to call the operator and report the low quality of communication, he will ask you to wait and update the information on your tariff, after 15 minutes the speed and signal should increase noticeably.

Using USB modems is easy and simple. Installation of drivers and software occurs automatically after connecting the modem to the computer and takes a minimum of time. Ingoda, however, still requires some participation in the user's process. But first things first.

Remove the cover from the modem and insert the SIM card into the slot. Close the cover and plug the modem into the computer's USB port.

The operating system should automatically detect and recognize the new device and start installing the drivers. All information is displayed in the taskbar in the form of pop-up messages.

After installing the drivers, the software installation will begin. When the software autorun window appears, start the installer wizard by clicking the "Run AutoRun.exe" button.

If the installation wizard does not start automatically, locate the AutoRun.exe file and run it manually. To do this, open "My Computer" and the CD-ROM drive with the Connect Manager program recorded on the modem's flash memory, and double-click on AutoRun.exe.

In the installation wizard window that opens, select the desired language, click OK, and follow the installer's instructions.

After installation is complete, launch Connect Manager using the desktop shortcut. A few seconds after launch, the program will detect the presence of a signal. Pay attention to its strength, characterized by the indicator in the upper right corner of the window.

For some modem models, the signal strength depends on their orientation in space. If the signal is not strong enough, you can try connecting the modem through a cable that will allow you to change the orientation of the modem. After each position change, it takes a few seconds for the modem to display the signal strength corresponding to the new position.

All necessary USB modem settings are set by default. To access the Internet after starting the program and detecting a signal, you just need to press the "Connect" button in the "Connect" menu. Establishing a connection is accompanied by a melodic sound signal and the appearance of a graphical display of traffic.

To manually configure the modem, you need to open the "Settings" menu. In the "Network" option, you can set the network and signal format - EDGE / GPRS or 3G. The default setting is automatic network and signal selection. To set the parameters manually, you need to right-click on the network name (MTS RUS 3G in the figure) and select the "Manual" option. After that, the signal will be scanned and a list of all networks fixed by the modem will be displayed. It remains to select the required one (MTS RUS 3G in our case) and click "Select".

In the "PIN Operations" option, a request for entering a PIN code is set. It is not required by default.

In the “Modem settings” option, the APN access point (internet.mts.ru), dial-up number (*99#), password (mts) and login (mts) for connection are set. The password and login fields can be left blank.

In addition to the "Connect" and "Settings" options, the program also contains the "SMS", "Balance" and "Calls" options. You can make voice calls from the Calls menu. To do this, you will need a headset with a microphone and headphones or speakers with a microphone.

From the "Balance" menu, a check is made current balance. To do this, click on the "Check balance" button.

The "SMS" menu is used to send and check incoming SMS.

Some additional modem settings can be made in the "Device Manager". To do this, open the "Control Panel" and launch the "Device Manager". Right click on the modem this case ZTF Proprietary) and select "Properties".