Factory Business-M company fulfills production orders plastic windows and doors, components and accessories for glazing.
We declare high quality of all products manufactured by the plant and are responsible for each product. Entrust us with the production of plastic windows or PVC doors according to your order - by doing so, you entrust the process to specialists with many years of experience and experience, the only manufacturer in Moscow with a 20-year history of production.
Components of the quality of work with the Business-M Window Company:
Quality components
To give the best, it is important that these are proven solutions from leaders, components that have passed the tests in the laboratories of test centers and end users in other regions.
In addition, only using the products of leading factories can guarantee a minimum defect.
It's all about the profile: high-quality PVC windows
For our products, we use only VEKA brand profile (Veka). Windows and doors have passed the 20-year test of time and have confirmed a high level of quality.
How can a profile be better than analogues?
At the VEKA plant, samples are taken twice a day from each extrusion line for examination. The daily control includes several evaluation tests:
- - Visually assessed appearance profile.
- - Measure the mass of one linear meter of the profile (fluctuations within 4% of the average mass of the VEKA PVC profile are considered acceptable).
- - For the main parts of a plastic window (sash, frame, impost, shtulp), an acetone test is carried out: a PVC profile sample is immersed in acetone and its change over time is observed. A quality PVC profile should not be changed within 5 hours.
In addition, optional profile indicators are necessarily evaluated to guarantee the quality of VEKA:
- - longitudinal shrinkage quality profile PVC VEKA when heated at 100 degrees for 1 hour - should not exceed 2%.
- - the impact strength of a falling load is evaluated. An express method is used to evaluate both the design of the profile itself and the correctness of maintaining the parameters technological process. The VEKA PVC profile is kept for some time in freezer at a temperature from 0 to -10 degrees, then a load weighing 1 kg falls on the profile from a height of 1 meter. The quality of the VEKA PVC profile is considered to be in accordance with the norm if only 1 sample out of 10 is destroyed during the strength tests. With this type of test, the mass of the load and the height from which it falls can change.
- - the reliability of the welded seam connecting different parts of VEKA PVC windows is checked: weld must withstand a load of 400 kg.
Today we - main producer Veka windows in Moscow.
Reliable fittings: open how you like, when you like
Providing the consumer with the required opening functions is the main task of the fittings. Fittings for high-class windows and doors must guarantee comfort, reliability and impeccable handling, and after the expiration of their service life - maintainability.
Guided by these criteria, we complete products only with the best fittings. Read more in the article. Products to order can have a different way of opening: rotary, folding, sliding, mid-hung - any.
Transparent protection: double-glazed window
Double-glazed windows occupy the largest area of the window structure. And if you do not notice them during everyday use of the window, then we have done our job efficiently.
In Business-M, you can order double-glazed windows of various functionality that can solve the needs of any buyer in protection: from noise, from frost, from the sun, from attempts to penetrate into privacy, for children and households and others. We are ready to offer these solutions, which are in demand and innovative, thanks to our suppliers and the selection of the best that we do for our customers.
Manufacturing of any designs
The first window production appeared in Moscow in 1995, before that all Euro-windows (as PVC windows with double-glazed windows were called then) were imported to Russia from Eastern Europe, in particular: the Czech Republic, Slovakia, Poland, already assembled, ready for installation.
In 1996 Business-M entered the window business. During the year, the first experience was gained in the installation and supply of windows and doors made of plastic from third-party manufacturers. In 1997 in Moscow opens own production Business-M company for the production of plastic windows and PVC doors.
Since the launch of the first line for the assembly of standard PVC profile windows, the plant has changed and modernized many times, mastering new ways of producing and using PVC profiles for the manufacture of window and door blocks of various shapes and configurations.
Today we are ready to take on the implementation of almost any glazing project, to manufacture plastic windows and doors of any complexity from the Veka (Veka) profile, in accordance with building codes and GOST requirements.
The assembly of products is carried out in accordance with GOST 30674-99 Window blocks made of polyvinyl chloride (PVC) profiles, product quality is confirmed by a declaration of conformity.
Production of plastic windows at the factory:
- Formation of a set for production;
- Profile preparation: bending, laminating, painting, milling;
- Reinforcement of the profile with a steel insert;
- Welding the frame and sash;
- Installation of window fittings;
- Installation of double-glazed windows;
- Packaging of products and accessories.
Upon completion of all stages of the production cycle, the products are prepared for shipment for pickup or delivery. transport company/ company's own transport.
Standard and non-standard PVC windows and doors on time
To order, products are manufactured in a complete set, according to the technical specifications, on the basis of VEKA profile systems with modern European-made fittings and double-glazed windows of a given chamber size and functionality.
Sizes, shapes, terms
At the company's factory, a product of a standard configuration and configuration is manufactured within 4 working days. The production time for each order is set individually in the technical design of the glazing, based on the complexity and availability of components in the company's warehouse.
Production time for structures of non-standard shape, color, configuration - from 5 to 30 days.
The cost of products manufactured by a window company
Product testing
Products are assembled at the Business-M plant from components corresponding to GOST. Finished products - window and door blocks - passed certification tests for compliance with GOST in accredited ROSTEST institutions: Research Institute of Building Physics and the Zamok laboratory. You can read the Declaration of Conformity in the section
For the convenience of ordering products of standard configurations that have passed the tests and have declared values for the parameters of heat and sound insulation, the reliability of fittings mechanisms, a production map has been formed for collections.
Production map of manufactured products by collections
| Greta Otto | Schonberg | Monarch | |
| System
frame/ impost/ sash | Veka Euroline 58 101.213/ 102.103/ 103.213 | Veka Softline 70 101.208/ 102.214/ 103.232 | Veka Softline 82 101.290/ 102.320/ 103.341 |
| Seal
material, frame/ material, sash | Veka, EPDM, 112.253 black/ EPDM, 112.254 black | Veka, EPDM, 112.253 black/ EPDM, 112.254 black | Veka, TPE, grey, black, caramel/ EPDM, 112.254 grey, black, caramel |
| accessories | Roto NT | Roto NT | Roto NT |
| filling,
sandwich/ double glazing | 24mm/ 32 mm | 41mm/ 42 mm | 44mm/ 44 mm |
| Bead | Veka 107.582/ 107.528 | Veka 107.225 | Veka 107.264 |
| Underframe support profile | Veka 110.118 | Veka 110.118 | Veka 110.118 |
| Window handle | Roto 227.808 | Roto 641.125 | Roto 227.907 |
| Dust profile | Veka 112.380 | Veka 112.380 | Veka 112.380 |
Easy start to production
You can order windows, doors and other products of the plant, both in Moscow and from another region.
Even if you decide to buy plastic windows for the first time, there will be no difficulties with the order: the company's specialists will provide you with all the necessary assistance in preparing the task for production. An employee of the company will issue the task promptly according to the measurement sheet of your specialist or a sketch made by a certified measurer of the company (for the retail department). Window measurement service.
The launch of products into production is carried out on the basis of a technical assignment drawn up in accordance with the requirements of the enterprise, taking into account the selected Veka profile series, fittings system, double-glazed windows, etc.
How to order plastic windows according to your size
- The equipment is selected and coordinated,
- Agree on the date of completion of the order,
Working mode
Mon-Fri: from 10:00 to 16:30
Sat, Sun - days off
The release of finished products from the warehouse is carried out upon presentation of an agreement and / or an identity document.
The company "Windows Master" manufactures PVC windows and doors in its production complex. Our installers install our products, carry out insulation, finishing balconies. We give a quality guarantee up to 15 years.
PVC glazing is popular with our customers, so the production of plastic windows is priority our work. Translucent plastic products effectively retain heat in the room, protect from noise, precipitation, wind. They look beautiful and are easily cleaned of dirt, are designed for operation for about 60 years and provide ample opportunities for interior and facade decoration. We produce PVC windows from the original REHAU profile, being the official partner of the German concern. Therefore, we sell our products without intermediary margins.
Production of plastic windows in Moscow
We fill the window or door profile with standard and optional double-glazed windows. We equip it with durable German fittings. We cover with lamination according to the RAL scale. We decorate with decorative layouts. We strengthen with an impost.
We use in production:
- high-quality German REHAU profile;
- durable Siegenia fasteners;
- high-tech European equipment;
- climate control systems;
- REHAU compactor, recognized as the industry standard.
High precision machines are used in our workshops. Every day, hand-assembled specialists produce window and door systems of standard and non-standard configurations and sizes. Before shipping to customers finished products we carefully check its quality. Our company produces windows and doors from metal-plastic complex shape painted in a variety of colors.
We order:
- production of standard and triangular, arched, round PVC windows;
- decoration of a balcony, loggia;
- production of stained-glass windows;
- winter garden glazing;
- decoration of the balcony room;
- development of original design for openings.
With a powerful production resource, our plastic window factory produces profile systems according to individual sizes. We precisely fulfill the requirements of customers in terms of functionality and glazing finish. We strictly adhere to the order fulfillment lines.
Benefits of Window Master
Our own production gives us the opportunity to control the quality of manufactured products at each site. Our customers can be sure of the reliability of windows and doors. We exclude deformation, breakage, marriage. We give a guarantee of up to 15 years, depending on the type of product or service.
The advantages of doors, windows of our production include:
- Diversity. A wide range of configurations, dimensions and profile shades. Our specialists develop and produce non-standard systems - in the form of a circle, trapezoid, triangle, arch. We veneer plastic with a decorative protective film in shades of the RAL palette. Coloring.
- Comprehensive service from one contractor. We carry out all types of glazing and insulation works. Our masters glaze houses, apartments, offices, shopping centers, institutions, turnkey enterprises, trim balconies.
- Affordable glazing. We often make discounts, regularly arrange promotions. We always measure openings free of charge before placing an order.
To consult with our manager, to make an accurate calculation of the order, call us or leave a request on the website. You can call the measurer right now.
Automated production lines, complete technical resource and phased quality control by the TC department are the exclusive attributes of the Osnova plant.
Integrated automation significantly increases labor productivity and product quality. The company today receives full-fledged statistics, controls deliveries, stock, dealers and optimizes the course production process.
Factory structure:
- window and door workshop
- non-standard construction workshop
- double-glazed shop
- aluminum structure shop
- shop of window sills and ebbs
- logistics center
The Osnova plant is equipped with a licensed software, designed specifically for automated production and design calculation of window and door systems.
Production
The Osnova plant is equipped with automated equipment for cutting profiles and glazing beads. Welding and cleaning of the frame - completely automated processes excluding manufacturing errors.
Competent organization of the production process ensures compliance with the full technological cycle, in accordance with all European norms and standards.
To improve product quality, increase production capacity and improve production time, in 2012 we purchased a unique Sturtz complex, which has no analogues in Ukraine.
To date, the Osnova plant has 10 automated lines and is the only company in Ukraine with such a fleet of equipment.
Raw material
The Osnova plant uses only high-quality German and Ukrainian PVC profiles for the production of window and door systems.
All profile groups, both supplied and manufactured in Ukraine, meet the basic requirements of noise and heat insulation, and are also safe for human health, as they are made using the unique greenline technology. Lead, which is traditionally used in PVC manufacturing, replaced by a neutral safe compound "calcium - zinc". The profiles have a delicate white color and retain a pleasant shine and primary beauty for a long time.
Logistics
In 2013, the construction of a logistics center was completed, which provided automated loading of structures, which had a positive effect on delivery times.
Each window has a factory marking, which is automatically generated during window assembly and contains necessary information: order number, customer name, overall dimensions of the product, delivery code, barcode.
The logistics department daily forms the optimal routes for the delivery of products to all regions of Ukraine. For the transportation of windows, trucks equipped with racks, fixing mechanisms and special safety ropes are used.
The Okna R company is one of the leaders in the production of plastic windows in Moscow and the Moscow region, and has been providing a full range of services for more than 15 years: we design and manufacture window, balcony and door structures, deliver them to the glazing facility, professional installation, warranty service and repair of any complexity.
In production window structures high quality is our priority finished products and affordable price.
Equipment of the plastic windows plant with the latest European equipment, use for the production of only proven components from famous brands(Rehau profiles, Lisec and Guardian Industries double-glazed windows, Maco and Fornax fittings), as well as compliance with GOST requirements and strict control at every stage, guarantee the high quality of our products.
At Windows R, you can:
- buy standard plastic windows standard sizes or order the production of non-standard designs according to individual sketches and sizes;
- not limited to ordering only white windows, we offer window lamination with Renolit colored films for various types of wood or metal;
- order windows with the required set of characteristics by choosing a double-glazed window with energy-saving, triplex, multifunctional or colored glass.
The range of products and services of the Okna R company is not limited to the production and installation of PVC windows, we also manufacture aluminum windows for glazing balconies and loggias, professional turnkey finishing of these premises, production of plastic doors for various purposes (entrance, interior, office and balcony ), manufacture and installation of blinds and roller blinds.
For dealers and construction companies we provide an excellent opportunity to order wholesale plastic windows and other products on mutually beneficial terms.
Plastic window assembly process
- Profile cutting. From a six-meter Rehau profile, blanks of window frames are cut at an angle to the required dimensions. In the manufacture of non-standard window structures, the profile is bent to a certain radius.
- Reinforcement. Next is the reinforcement plastic profile to increase the rigidity and strength of the final product.
- Seam welding. Thanks to the assembly on automatic equipment, four corners of the structure are welded at the same time, which makes it possible to avoid defects and distortions during production.
- Construction assembly. According to the exact marking, fittings are mounted and a sealant is installed in special grooves. After that, a double-glazed window is fixed in the window frame with the help of glazing beads.
- Order picking. On the final stage manufacturing, installation of overlays for hinges, window handles, supply valves and other accessories prescribed in the contract is carried out.
Depending on the workload of production lines and the complexity of designs, the production of plastic windows takes from 5 to 10 days.