The Promsvyaz zte zxhn h208n modem is usually issued to its subscribers by the Belarusian provider Byfly. But the instructions below can help users of another operator.
By default, the modem is set to Bridge mode, that is, the connection is possible only through a network cable. But now, many devices work only via WiFi, for example, smartphones, so you need to reconfigure the modem to router mode. Before doing this, make sure that:
- a computer or laptop is connected to the router via a network cable (the lan1, lan2 or lan3 light should be on);
- Internet access is available when the device is connected via cable, if it is not available, then the problem is in the computer.
If everything works as it should, then you can start setting the Route mode.
Setting up the zte zxhn h208n modem
To get started, open any browser and type “http://192.168.1.1” in the address bar. Next, you will be asked to enter a username and password, usually admin / admin. If the address or the login-password combination does not fit, look at the bottom of the router - there is a sticker with all the data.
After entering, the control panel of the Promsvyaz zte zxhn h208n router will open.
Next, select “Network” from the menu on the left side. In the list that appears, click on WAN, and then on WAN Connection.
The router settings window will open. In the first line, select PVC0 from the drop-down list.
A new Promsvyaz zte zxhn h208n settings window will open and in the Type line, select Route from the drop-down list.
A new window will open. Now we need to enter our credentials. In the login field, you need to write the number of your contract, and the password should be given to you in Beltelecom (byfly). To save your settings, click Modify. Everything, the device is configured and can be used to connect via WiFi.
After the device has started working in router mode, it will distribute the Internet constantly, so you do not need to constantly start the connection manually when you start the computer - this will happen automatically.
The zte zxhn h108n router released last season has found wide application in the networks of the largest telecom operators. The Ukrtelecom provider is no exception, which recommends purchasing this device to connect to its network and rents it out.
The modem supports Internet connection using ADSL technology. It can provide access to the global network for four subscribers through a wired interface, and the device is also equipped with a WiFi module for creating wireless connections.
The presented instructions will show how to set up a zxhn h108n or a similar zxv10 h108l device to work with the Ukrtelecom provider. It should be noted that the connection algorithm wifi router and for other telecom operators it is not very different, so the instruction will be useful to users of other networks.
To connect a WiFi router to the Ukrtelecom network using ADSL technology, perform the following operations:
Connect the power supply to the Wi-Fi modem through the "Power" connector, then plug it into the electrical network.
Connect the “Line” port of the splitter supplied with the WiFi router to a telephone socket. Connect zxhn h108n or zxv10 h108l to the “Modem” port, on which the required socket is labeled “DSL”. In the “Phone” port, connect the telephone set, if any, and conclude an agreement with Ukrtelecom for the provision of this type of communication.
To configure the parameters of the zte zxhn h108n or zxv10 h108l, connect your computer to it via an Ethernet cable (included). For this, the “LAN1” port on the Wi-Fi modem is used, and on the PC, the network card connector.
Computer settings
In cases where the computer is connected, and the corresponding LAN indicator on the front panel of the WiFi router is not lit, you should configure the PC's network card.
Windows 7
Through the "Start" activate the "Control Panel" and click on "View network status and tasks."
Click on "Change adapter settings".
Right-click on the active connection. A list will appear where you should select the "Properties" value.
Double click on "Internet Protocol Version 4(TCP/IPv4)".
Switch the dialog boxes to the states shown in the following figure.
Commit the changes by clicking on "OK" in all open windows.
In Windows 8 (eight), the setup is performed in the same way, but in order to open the "Control Panel" you need to right-click on the "Start" menu and select "All Applications", where the necessary link will be.
Internet connections
Setting up zte zxhn h108n or zxv10 h108l for Ukrtelecom is better from the factory settings, so the parameters of the used modem should be reset. To do this, press and hold the “Reset” button recessed in the device case for at least ten seconds, and then wait for it to reboot.
The modem connected to the network using ADSL technology and to the computer with an Ethernet cable is configured according to the following algorithm:
Log in to the device web interface using an Internet browser, to do this, type the link 192.168.1.1 and launch the transition through it.
Open a browser, enter http://192.168.1.1 in the address bar
login and password from the router admin \ admin
In the main window of the Wi-Fi router interface, find the link to the "Interface Setup" tab and click on it, and then on the "Internet" settings item.
DHCP
To configure a DHCP connection, change the values of the fields:
PPPoE
To configure a PPPoE connection, change the fields:
After completing the configuration of the necessary connection, save the changes by clicking on "Save".
For the change to take effect, restart the WiFi router by going to the "SysRestart" item of the "MainInterface" tab. Here, select the "Current Setting" item and click on the "Restart" button.
Wait for the zte zxhn h108n or zxv10 h108l to finish rebooting and access the Internet from your computer using ADSL technology.
WiFi setup
To enable the function of providing wireless Internet access via WiFi, you must perform a number of additional steps:
In the web interface of the Wi-Fi router, go to the "Interface Setup" tab, where open the "Wireless" item.
Set up the following page fields:
- "Access Point": Activated;
- "Wireless Mode": 802.1 1b+g+n;
- "Chanel Bandwidth": 20/40 MHz;
- "SSID": the name of your network, displayed in the list of available connections on subscriber devices. It is chosen arbitrarily, but only numbers and Latin letters are allowed;
- "Authentication Type": WPA2-PSK;
- "Encryption": TKIP/AES;
- "Pre-Shared Key": arbitrary network password, numbers and Latin letters are allowed.
Save the changes by clicking the "Save" button and reboot WiFi modem according to the previously mentioned algorithm.
Wait for the reboot to finish and connect your Wi-Fi devices to the Internet.
Found a typo? Select the text and press Ctrl + Enter
Today I purchased a ZTE MF-190 USB modem and found that it was not possible to connect to i-no using standard WinXP tools. Googled a little and found out that for Beeline you need to register an additional AT command in the modem settings: AT + CGDCONT = 1, "IP", "internet.beeline.ru" and when connecting, enter the phone number * 99 # or * 99 *** 1#, login/password beeline/beeline. When using any of the specified phones, I get error 619.
At the same time, it is completely possible to connect via Megafon's USB modem without any problems - just without any problems at all.
I have no desire to use the Beeline USB-modem program, and I don’t need it either.
Maybe someone has already solved this problem?
The same problem came up recently. Decided to unsubscribe despite the fact that the topic is clearly dead.
There are not many dances with a tambourine, but they are.
So:
1. We need drivers for the modem. They can be taken. I did not use these firewood, so I cannot give a 100% guarantee of work when using them. I used native firewood taken when installing native software from the modem. They are located in the folder with the program (by default, the path is C:\Program Files\Beeline USB Modem\Drivers)
2. You will need a program DC Unlocker. You can take. It is needed to send AT commands to the modem. You can use any other similar program.
Well, now the actual procedure:
1. Insert the modem into the USB port. The system will detect the modem as a CD drive.
2. We go to "My Computer", find this very CD, right-click on it and select "Eject".
4.After installing the drivers. We create a connection using standard XP tools
5. In the modem settings (Device Manager - RMB on the modem -Properties - Additional communication parameters) register an additional command AT+CGDCONT=1,"IP","internet.beeline.ru"
In principle, this could have ended, if not too lazy to extract sd-rum every timeTo avoid this, read on.
6. Run DC-Unlocker. We select ZTE modems and press the button with a magnifying glass.
The result should be something like this:
Modem definition:
selected:
manufacturer - ZTE modems
Found Applications port COM10
Found Diagnostics port COM8
Found modem: MF190
Model: ZTE MF190
IMEI: 861ХХХХХХХХХ017
Firmware version: BD_RUBLNMF190V1.0.0B01
Compilation date/time: Sep 03 2010 15:20:42
Chipset: Qualcomm MSM6290
SIM Lock Status: Unlocked
7. In DC-Unlocker, under the double line, enter the AT command AT+ZCDRUN=8 it removes the autorun.flg file from the modem, which is responsible for starting the modem as a CD-ROM. We take out and insert the modem.
After these steps, the connection was created and everything worked, but another problem arose (maybe it depends on the hardware). After rebooting or turning off the computer, the modem refused to see the network and the red indicator was on. Everything was solved simply. Registered in DC-Unlocker AT+ZSNT=0,0,0(Set the mode of operation - auto) and everything worked as it should.
Setting up modems of one of largest companies telecommunications equipment in China ZTE ZXDSL 831CII or 931WII for the operator Rostelecom and other Internet providers is performed using the web interface of the equipment. Before proceeding to making changes in the software part, it is recommended to make sure that all router interfaces are connected correctly, and also check the status of the device indicators after it is turned on.
Unpacking and installing equipment
Routers ZXDSL 931WII and ZXDSL 831CII need to be fully equipped for connection and subsequent configuration under Rostelecom. If one of the main components is missing, you will not be able to start working with the router. Therefore, it is recommended that you first check the scope of delivery of the equipment.
Router package
The box with ZTE routers of the ZXDSL line comes with:
- wireless router;
- 12 V power supply;
- splitter;
- telephone cable;
- network Ethernet cord;
- disk with software and documentation;
- instruction;
- certificate from ZTE (quality assurance);
- warranty document.
The starter kit included in the box with the wireless router will allow you to activate the basic functions of the equipment. However, in order to connect IP phones and additional devices, you will need to purchase the necessary cords separately.
Connectors, buttons and indicators
Before you go into the hardware software and configure the necessary functions of the ZTE ZXDSL 931WII or ZXDSL 831CII modems from Rostelecom, you will need to correctly connect the router to the provider's network. To do this, it is recommended to familiarize yourself with the connectors and control buttons available on the device case.
The following interfaces are located on the back of the router:
- nutrition;
- DSL input;
- LAN (1-4).
In addition to the connectors, here you can find the power and reset buttons. To use the latter, it will be necessary to arm yourself with a thin object, since it is located in a recess. This is done to avoid accidental pressing.
The front panel of the device is equipped with indicators that indicate the connection of power, computers via LAN cable, operation WiFi connections and availability of communication with providers.
Configuring the ZTE ZXDSL 831 modem for the Rostelecom network
Setting up the ZTE ZXDSL 931WII modem from Rostelecom is performed in several stages. First of all, you need to go into the hardware software and personalize the access parameters to the web interface. To do this, you need to type in the address bar of any of the browsers the IP of the device. For the ZTE ZXDSL line of models, by default, it has a value of 192.168.1.1.
After the required address has been entered and confirmed, the menu for entering the parameters will open in front of the user. At this stage, you must enter the username and password for the software. Login data, like on many other routers, is admin/admin by default. In order to set custom login and password parameters, you can go to the Security tab. This step is optional if you are connecting to a home network or small office.
Attention: In cases where it is necessary to configure the operation of the router for public use, personalization of authentication parameters should be carried out in without fail. This will protect the wireless access point from unauthorized persons entering its settings.
Also, to provide additional security from hacker attacks, it is possible to change the standard IP address of the equipment in the LAN item.
After you have already logged into the web interface, you will need to proceed to configure the settings for the connection itself. To do this, open the Advanced Setup menu and select the WAN item (Wide Area Network or in translation global network). Do not rush with subsequent settings. Some of the branches of Rostelecom have non-standard parameters, which can be found in the contract being concluded. However, the provider most often uses the PPPoE connection type. When choosing it, you should immediately prepare a username and password, since the next step will require them to be entered. In addition to the authentication data, you need to select its method and service name. If the provider's documentation does not contain information about the activation of such parameters as Use Static IP Address, PPP IP extension and Dial on demand, their value will need to be left by default. After saving the settings and rebooting the equipment, the wired Internet connection will be activated.
ZXDSL 931WII: setting up a Wi-Fi connection for Rostelecom
To set up a Wi-Fi connection on ZXDSL 831CII or 931WII routers, you need to find the Wireless item in the firmware web interface, where you can configure wireless Internet distribution from Rostelecom. Here you need to activate the access point mode and designate its name, as well as determine the type of protection wireless network. If you plan to create a private network for your office or home, enable security settings and enter a strong password.
Firmware update on ZXDSL 831CII for Rostelecom
Regardless of Rostelecom or other providers, the ZXDSL 931WII and 831CII support firmware updates. Software equipment has two options for loading. The software can be downloaded and installed on the router in just a few clicks by selecting the automatic search for updates item in the Firmware tab. The second option will allow you to flash both on a more recent system, and return to the required version. Here you will need to select the firmware from the local disk of the computer. You can download any of the versions suitable for your router on the official ZTE website.
Thanks to the use of a visually understandable web interface, setting up ZTE ZXDSL routers will not take much time. The key to successful activation of the basic options of a wireless router is the availability of a complete set of equipment and a contract, which specifies the WAN connection parameters.